federal_register: 2011-17404
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
This data as json
| document_number | title | type | abstract | publication_date | pub_year | pub_month | html_url | pdf_url | agency_names | agency_ids | excerpts | regulation_id_numbers |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2011-17404 | Airworthiness Directives; The Boeing Company Model 747 Airplanes | Rule | We are superseding an existing airworthiness directive (AD) that applies to the products listed above. That AD currently requires repetitive inspections to detect damage of the sleeving and wire bundles of the boost pumps of the numbers 1 and 4 main fuel tanks, and of the auxiliary tank jettison pumps (if installed); replacement of any damaged sleeving with new sleeving; and repair or replacement of any damaged wires with new wires. For airplanes on which any burned wires are found, that AD also requires an inspection to detect damage of the conduit, and replacement of any damaged conduit with a serviceable conduit. This new AD reduces the initial compliance time and repetitive inspection interval in the existing AD. This AD was prompted by fleet information indicating that the repetitive inspection interval in the existing AD is too long because excessive chafing of the sleeving continues to occur much earlier than expected between scheduled inspections. We are issuing this AD to detect and correct abrasion of the Teflon sleeving and wires in the bundles of the fuel boost pumps for the numbers 1 and 4 main fuel tanks and of the auxiliary tank jettison pumps (if installed), which could result in electrical arcing between the wires and aluminum conduit and consequent fire or explosion of the fuel tank. | 2011-07-15 | 2011 | 7 | https://www.federalregister.gov/documents/2011/07/15/2011-17404/airworthiness-directives-the-boeing-company-model-747-airplanes | https://www.govinfo.gov/content/pkg/FR-2011-07-15/pdf/2011-17404.pdf | Transportation Department; Federal Aviation Administration | 492,159 | We are superseding an existing airworthiness directive (AD) that applies to the products listed above. That AD currently requires repetitive inspections to detect damage of the sleeving and wire bundles of the boost pumps of the numbers 1 and 4 main... |