cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
54 rows where part_number = 763 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: title_name, chapter, subchapter, part_name, subpart, subpart_name, amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40:40:34.0.1.1.9.2.1.1 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.80 Scope and purpose. | EPA | (a) This rule requires local education agencies to identify friable and nonfriable asbestos-containing material (ACM) in public and private elementary and secondary schools by visually inspecting school buildings for such materials, sampling such materials if they are not assumed to be ACM, and having samples analyzed by appropriate techniques referred to in this rule. The rule requires local education agencies to submit management plans to the Governor of their State by October 12, 1988, begin to implement the plans by July 9, 1989, and complete implementation of the plans in a timely fashion. In addition, local education agencies are required to use persons who have been accredited to conduct inspections, reinspections, develop management plans, or perform response actions. The rule also includes recordkeeping requirements. Local education agencies may contractually delegate their duties under this rule, but they remain responsible for the proper performance of those duties. Local education agencies are encouraged to consult with EPA Regional Asbestos Coordinators, or if applicable, a State's lead agency designated by the State Governor, for assistance in complying with this rule. (b) Local education agencies must provide for the transportation and disposal of asbestos in accordance with EPA's “Asbestos Waste Management Guidance.” For convenience, applicable sections of this guidance are reprinted as appendix D of this subpart. There are regulations in place, however, that affect transportation and disposal of asbestos waste generated by this rule. The transportation of asbestos waste is covered by the Department of Transportation (49 CFR part 173, subpart J) and disposal is covered by the National Emissions Standards for Hazardous Air Pollutants (NESHAP) (40 CFR part 61, subpart M). | ||||
| 40:40:34.0.1.1.9.2.1.10 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.92 Training and periodic surveillance. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 60 FR 34465, July 3, 1995; 65 FR 69216, Nov. 15, 2000] | (a) Training. (1) The local education agency shall ensure, prior to the implementation of the O&M provisions of the management plan, that all members of its maintenance and custodial staff (custodians, electricians, heating/air conditioning engineers, plumbers, etc.) who may work in a building that contains ACBM receive awareness training of at least 2 hours, whether or not they are required to work with ACBM. New custodial and maintenance employees shall be trained within 60 days after commencement of employment. Training shall include, but not be limited to: (i) Information regarding asbestos and its various uses and forms. (ii) Information on the health effects associated with asbestos exposure. (iii) Locations of ACBM identified throughout each school building in which they work. (iv) Recognition of damage, deterioration, and delamination of ACBM. (v) Name and telephone number of the person designated to carry out general local education agency responsibilities under § 763.84 and the availability and location of the management plan. (2) The local education agency shall ensure that all members of its maintenance and custodial staff who conduct any activities that will result in the disturbance of ACBM shall receive training described in paragraph (a)(1) of this section and 14 hours of additional training. Additional training shall include, but not be limited to: (i) Descriptions of the proper methods of handling ACBM. (ii) Information on the use of respiratory protection as contained in the EPA/NIOSH Guide to Respiratory Protection for the Asbestos Abatement Industry, September 1986 (EPA 560/OPPTS-86-001), available from the Director, Environmental Assistance Division (7408), Office of Pollution Prevention and Toxics, U.S. Environmental Protection Agency, Room E-543B, 1200 Pennsylvania Ave., NW., Washington, DC 20460, Telephone: (202) 554-1404, TDD: (202) 544-0551 and other personal protection measures. (iii) The provisions of this section and § 763.91, appendices A, C, and D of this subpart E of … | |||
| 40:40:34.0.1.1.9.2.1.11 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.93 Management plans. | EPA | (a)(1) On or before October 12, 1988, each local education agency shall develop an asbestos management plan for each school, including all buildings that they lease, own, or otherwise use as school buildings, and submit the plan to an Agency designated by the Governor of the State in which the local education agency is located. The plan may be submitted in stages that cover a portion of the school buildings under the authority of the local education agency. (2) If a building to be used as part of a school is leased or otherwise acquired after October 12, 1988, the local education agency shall include the new building in the management plan for the school prior to its use as a school building. The revised portions of the management plan shall be submitted to the Agency designated by the Governor. (3) If a local education agency begins to use a building as a school after October 12, 1988, the local education agency shall submit a management plan for the school to the Agency designated by the Governor prior to its use as a school. (b) On or before October 17, 1987, the Governor of each State shall notify local education agencies in the State regarding where to submit their management plans. States may establish administrative procedures for reviewing management plans. If the Governor does not disapprove a management plan within 90 days after receipt of the plan, the local education agency shall implement the plan. (c) Each local education agency must begin implementation of its management plan on or before July 9, 1989, and complete implementation in a timely fashion. (d) Each local education agency shall maintain and update its management plan to keep it current with ongoing operations and maintenance, periodic surveillance, inspection, reinspection, and response action activities. All provisions required to be included in the management plan under this section shall be retained as part of the management plan, as well as any information that has been revised to bring the plan up-to-date. (e) The management pl… | ||||
| 40:40:34.0.1.1.9.2.1.12 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.94 Recordkeeping. | EPA | (a) Records required under this section shall be maintained in a centralized location in the administrative office of both the school and the local education agency as part of the management plan. For each homogeneous area where all ACBM has been removed, the local education agency shall ensure that such records are retained for 3 years after the next reinspection required under § 763.85(b)(1), or for an equivalent period. (b) For each preventive measure and response action taken for friable and nonfriable ACBM and friable and nonfriable suspected ACBM assumed to be ACM, the local education agency shall provide: (1) A detailed written description of the measure or action, including methods used, the location where the measure or action was taken, reasons for selecting the measure or action, start and completion dates of the work, names and addresses of all contractors involved, and if applicable, their State of accreditation, and accreditation numbers, and if ACBM is removed, the name and location of storage or disposal site of the ACM. (2) The name and signature of any person collecting any air sample required to be collected at the completion of certain response actions specified by § 763.90(i), the locations where samples were collected, date of collection, the name and address of the laboratory analyzing the samples, the date of analysis, the results of the analysis, the method of analysis, the name and signature of the person performing the analysis, and a statement that the laboratory meets the applicable requirements of § 763.90(i)(2)(ii). (c) For each person required to be trained under § 763.92(a) (1) and (2), the local education agency shall provide the person's name and job title, the date that training was completed by that person, the location of the training, and the number of hours completed in such training. (d) For each time that periodic surveillance under § 763.92(b) is performed, the local education agency shall record the name of each person performing the surveillance, the date of the s… | ||||
| 40:40:34.0.1.1.9.2.1.13 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.95 Warning labels. | EPA | (a) The local education agency shall attach a warning label immediately adjacent to any friable and nonfriable ACBM and suspected ACBM assumed to be ACM located in routine maintenance areas (such as boiler rooms) at each school building. This shall include: (1) Friable ACBM that was responded to by a means other than removal. (2) ACBM for which no response action was carried out. (b) All labels shall be prominently displayed in readily visible locations and shall remain posted until the ACBM that is labeled is removed. (c) The warning label shall read, in print which is readily visible because of large size or bright color, as follows: CAUTION: ASBESTOS. HAZARDOUS. DO NOT DISTURB WITHOUT PROPER TRAINING AND EQUIPMENT. | ||||
| 40:40:34.0.1.1.9.2.1.14 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.97 Compliance and enforcement. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 89 FR 88656, Nov. 8, 2024] | (a) Compliance with Title II of the Act. (1) Section 207(a) of Title II of the Act (15 U.S.C. 2647) makes it unlawful for any local education agency to: (i) Fail to conduct inspections pursuant to section 203(b) of Title II of the Act, including failure to follow procedures and failure to use accredited personnel and laboratories. (ii) Knowingly submit false information to the Governor regarding any inspection pursuant to regulations under section 203(i) of Title II of the Act. (iii) Fail to develop a management plan pursuant to regulations under section 203(i) of Title II of the Act. (2) Section 207(a) of Title II of the Act (15 U.S.C. 2647) also provides that any local education agency which violates any provision of section 207 shall be liable for a civil penalty of not more than $5,000 for each day during which the violation continues. For the purposes of this subpart, a “violation” means a failure to comply with respect to a single school building. (b) Compliance with Title I of the Act. (1) Section 15(1)(D) of Title I of the Act (15 U.S.C. 2614) makes it unlawful for any person to fail or refuse to comply with any requirement of Title II or any rule promulgated or order issued under Title II. Therefore, any person who violates any requirement of this subpart is in violation of section 15 of Title I of the Act. (2) Section 15(3) of Title I of the Act (15 U.S.C. 2614) makes it unlawful for any person to fail or refuse to establish or maintain records, submit reports, notices or other information, or permit access to or copying of records, as required by this Act or a rule thereunder. (3) Section 15(4) (15 U.S.C. 2614) of Title I of the Act makes it unlawful for any person to fail or refuse to permit entry or inspection as required by section 11 of Title I of the Act. (4) Section 16(a) of Title I of the Act (15 U.S.C. 2615) provides that any person who violates any provision of section 15 of Title I of the Act shall be liable to the United States for a civil penalty in an amount not to exceed $25,0… | |||
| 40:40:34.0.1.1.9.2.1.15 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.98 Waiver; delegation to State. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 70 FR 59889, Oct. 13, 2005] | (a) General. (1) Upon request from a state Governor and after notice and comment and an opportunity for a public hearing in accordance with paragraphs (b) and (c) of this section, EPA may waive some or all of the requirements of this subpart E if the state has established and is implementing or intends to implement a program of asbestos inspection and management that contains requirements that are at least as stringent as the requirements of this subpart. In addition, if the state chooses to receive electronic documents, the state program must include, at a minimum, the requirements of 40 CFR part 3—(Electronic reporting). (2) A waiver from any requirement of this subpart E shall apply only to the specific provision for which a waiver has been granted under this section. All requirements of this subpart E shall apply until a waiver is granted under this section. (b) Request. Each request by a Governor to waive any requirement of this subpart E shall be sent with three complete copies of the request to the Regional Administrator for the EPA Region in which the State is located and shall include: (1) A copy of the State provisions or proposed provisions relating to its program of asbestos inspection and management in schools for which the request is made. (2)(i) The name of the State agency that is or will be responsible for administering and enforcing the requirements for which a waiver is requested, the names and job titles of responsible officials in that agency, and phone numbers where the officials can be contacted. (ii) In the event that more than one agency is or will be responsible for administering and enforcing the requirements for which a waiver is requested, a description of the functions to be performed by each agency, how the program will be coordinated by the lead agency to ensure consistency and effective administration in the asbestos inspection and management program within the State, the names and job titles of responsible officials in the agencies, and phone numbers where the officials … | |||
| 40:40:34.0.1.1.9.2.1.16 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.99 Exclusions. | EPA | (a) A local education agency shall not be required to perform an inspection under § 763.85(a) in any sampling area as defined in 40 CFR 763.103 or homogeneous area of a school building where: (1) An accredited inspector has determined that, based on sampling records, friable ACBM was identified in that homogeneous or sampling area during an inspection conducted before December 14, 1987. The inspector shall sign and date a statement to that effect with his or her State of accreditation and if applicable, accreditation number and, within 30 days after such determination, submit a copy of the statement to the person designated under § 763.84 for inclusion in the management plan. However, an accredited inspector shall assess the friable ACBM under § 763.88. (2) An accredited inspector has determined that, based on sampling records, nonfriable ACBM was identified in that homogeneous or sampling area during an inspection conducted before December 14, 1987. The inspector shall sign and date a statement to that effect with his or her State of accreditation and if applicable, accreditation number and, within 30 days after such determination, submit a copy of the statement to the person designated under § 763.84 for inclusion in the management plan. However, an accredited inspector shall identify whether material that was nonfriable has become friable since that previous inspection and shall assess the newly-friable ACBM under § 763.88. (3) Based on sampling records and inspection records, an accredited inspector has determined that no ACBM is present in the homogeneous or sampling area and the records show that the area was sampled, before December 14, 1987 in substantial compliance with § 763.85(a), which for purposes of this section means in a random manner and with a sufficient number of samples to reasonably ensure that the area is not ACBM. (i) The accredited inspector shall sign and date a statement, with his or her State of accreditation and if applicable, accreditation number that the homogeneous or sampling a… | ||||
| 40:40:34.0.1.1.9.2.1.2 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.83 Definitions. | EPA | For purposes of this subpart: Act means the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601, et seq. Accessible when referring to ACM means that the material is subject to disturbance by school building occupants or custodial or maintenance personnel in the course of their normal activities. Accredited or accreditation when referring to a person or laboratory means that such person or laboratory is accredited in accordance with section 206 of Title II of the Act. Air erosion means the passage of air over friable ACBM which may result in the release of asbestos fibers. Asbestos means the asbestiform varieties of: Chrysotile (serpentine); crocidolite (riebeckite); amosite (cum- mingtonitegrunerite); anthophyllite; tremolite; and actinolite. Asbestos-containing material (ACM) when referring to school buildings means any material or product which contains more than 1 percent asbestos. Asbestos-containing building material (ACBM) means surfacing ACM, thermal system insulation ACM, or miscellaneous ACM that is found in or on interior structural members or other parts of a school building. Asbestos debris means pieces of ACBM that can be identified by color, texture, or composition, or means dust, if the dust is determined by an accredited inspector to be ACM. Damaged friable miscellaneous ACM means friable miscellaneous ACM which has deteriorated or sustained physical injury such that the internal structure (cohesion) of the material is inadequate or, if applicable, which has delaminated such that its bond to the substrate (adhesion) is inadequate or which for any other reason lacks fiber cohesion or adhesion qualities. Such damage or deterioration may be illustrated by the separation of ACM into layers; separation of ACM from the substrate; flaking, blistering, or crumbling of the ACM surface; water damage; significant or repeated water stains, scrapes, gouges, mars or other signs of physical injury on the ACM. Asbestos debris originating from the ACBM in question may also indicate damage. Da… | ||||
| 40:40:34.0.1.1.9.2.1.3 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.84 General local education agency responsibilities. | EPA | Each local education agency shall: (a) Ensure that the activities of any persons who perform inspections, reinspections, and periodic surveillance, develop and update management plans, and develop and implement response actions, including operations and maintenance, are carried out in accordance with subpart E of this part. (b) Ensure that all custodial and maintenance employees are properly trained as required by this subpart E and other applicable Federal and/or State regulations (e.g., the Occupational Safety and Health Administration asbestos standard for construction, the EPA worker protection rule, or applicable State regulations). (c) Ensure that workers and building occupants, or their legal guardians, are informed at least once each school year about inspections, response actions, and post-response action activities, including periodic reinspection and surveillance activities that are planned or in progress. (d) Ensure that short-term workers (e.g., telephone repair workers, utility workers, or exterminators) who may come in contact with asbestos in a school are provided information regarding the locations of ACBM and suspected ACBM assumed to be ACM. (e) Ensure that warning labels are posted in accordance with § 763.95. (f) Ensure that management plans are available for inspection and notification of such availability has been provided as specified in the management plan under § 763.93(g). (g)(1) Designate a person to ensure that requirements under this section are properly implemented. (2) Ensure that the designated person receives adequate training to perform duties assigned under this section. Such training shall provide, as necessary, basic knowledge of: (i) Health effects of asbestos. (ii) Detection, identification, and assessment of ACM. (iii) Options for controlling ACBM. (iv) Asbestos management programs. (v) Relevant Federal and State regulations concerning asbestos, including those in this subpart E and those of the Occupational Safety and Health Administration, U.S. Department of… | ||||
| 40:40:34.0.1.1.9.2.1.4 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.85 Inspection and reinspections. | EPA | (a) Inspection. (1) Except as provided in paragraph (a)(2) of this section, before October 12, 1988, local education agencies shall inspect each school building that they lease, own, or otherwise use as a school building to identify all locations of friable and nonfriable ACBM. (2) Any building leased or acquired on or after October 12, 1988, that is to be used as a school building shall be inspected as described under paragraphs (a) (3) and (4) of this section prior to use as a school building. In the event that emergency use of an uninspected building as a school building is necessitated, such buildings shall be inspected within 30 days after commencement of such use. (3) Each inspection shall be made by an accredited inspector. (4) For each area of a school building, except as excluded under § 763.99, each person performing an inspection shall: (i) Visually inspect the area to identify the locations of all suspected ACBM. (ii) Touch all suspected ACBM to determine whether they are friable. (iii) Identify all homogeneous areas of friable suspected ACBM and all homogeneous areas of nonfriable suspected ACBM. (iv) Assume that some or all of the homogeneous areas are ACM, and, for each homogeneous area that is not assumed to be ACM, collect and submit for analysis bulk samples under §§ 763.86 and 763.87. (v) Assess, under § 763.88, friable material in areas where samples are collected, friable material in areas that are assumed to be ACBM, and friable ACBM identified during a previous inspection. (vi) Record the following and submit to the person designated under § 763.84 a copy of such record for inclusion in the management plan within 30 days of the inspection: (A) An inspection report with the date of the inspection signed by each accredited person making the inspection, State of accreditation, and if applicable, his or her accreditation number. (B) An inventory of the locations of the homogeneous areas where samples are collected, exact location where each bulk sample is collected, dates that samp… | ||||
| 40:40:34.0.1.1.9.2.1.5 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.86 Sampling. | EPA | (a) Surfacing material. An accredited inspector shall collect, in a statistically random manner that is representative of the homogeneous area, bulk samples from each homogeneous area of friable surfacing material that is not assumed to be ACM, and shall collect the samples as follows: (1) At least three bulk samples shall be collected from each homogeneous area that is 1,000 ft 2 or less, except as provided in § 763.87(c)(2). (2) At least five bulk samples shall be collected from each homogeneous area that is greater than 1,000 ft 2 but less than or equal to 5,000 ft 2 , except as provided in § 763.87(c)(2). (3) At least seven bulk samples shall be collected from each homogeneous area that is greater than 5,000 ft 2 , except as provided in § 763.87(c)(2). (b) Thermal system insulation. (1) Except as provided in paragraphs (b) (2) through (4) of this section and § 763.87(c), an accredited inspector shall collect, in a randomly distributed manner, at least three bulk samples from each homogeneous area of thermal system insulation that is not assumed to be ACM. (2) Collect at least one bulk sample from each homogeneous area of patched thermal system insulation that is not assumed to be ACM if the patched section is less than 6 linear or square feet. (3) In a manner sufficient to determine whether the material is ACM or not ACM, collect bulk samples from each insulated mechanical system that is not assumed to be ACM where cement or plaster is used on fittings such as tees, elbows, or valves, except as provided under § 763.87(c)(2). (4) Bulk samples are not required to be collected from any homogeneous area where the accredited inspector has determined that the thermal system insulation is fiberglass, foam glass, rubber, or other non-ACBM. (c) Miscellaneous material. In a manner sufficient to determine whether material is ACM or not ACM, an accredited inspector shall collect bulk samples from each homogeneous area of friable miscellaneous material that is not assumed to be ACM. (d) Nonfriable su… | ||||
| 40:40:34.0.1.1.9.2.1.6 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.87 Analysis. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 60 FR 31922, June 19, 1995] | (a) Local education agencies shall have bulk samples, collected under § 763.86 and submitted for analysis, analyzed for asbestos using laboratories accredited by the National Bureau of Standards (NBS). Local education agencies shall use laboratories which have received interim accreditation for polarized light microscopy (PLM) analysis under the EPA Interim Asbestos Bulk Sample Analysis Quality Assurance Program until the NBS PLM laboratory accreditation program for PLM is operational. (b) Bulk samples shall not be composited for analysis and shall be analyzed for asbestos content by PLM, using the “Interim Method for the Determination of Asbestos in Bulk Insulation Samples” found at appendix E to subpart E of this part. (c)(1) A homogeneous area is considered not to contain ACM only if the results of all samples required to be collected from the area show asbestos in amounts of 1 percent or less. (2) A homogeneous area shall be determined to contain ACM based on a finding that the results of at least one sample collected from that area shows that asbestos is present in an amount greater than 1 percent. (d) The name and address of each laboratory performing an analysis, the date of analysis, and the name and signature of the person performing the analysis shall be submitted to the person designated under § 763.84 for inclusion into the management plan within 30 days of the analysis. | |||
| 40:40:34.0.1.1.9.2.1.7 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.88 Assessment. | EPA | (a)(1) For each inspection and reinspection conducted under § 763.85 (a) and (c) and previous inspections specified under § 763.99, the local education agency shall have an accredited inspector provide a written assessment of all friable known or assumed ACBM in the school building. (2) Each accredited inspector providing a written assessment shall sign and date the assessment, provide his or her State of accreditation, and if applicable, accreditation number, and submit a copy of the assessment to the person designated under § 763.84 for inclusion in the management plan within 30 days of the assessment. (b) The inspector shall classify and give reasons in the written assessment for classifying the ACBM and suspected ACBM assumed to be ACM in the school building into one of the following categories: (1) Damaged or significantly damaged thermal system insulation ACM. (2) Damaged friable surfacing ACM. (3) Significantly damaged friable surfacing ACM. (4) Damaged or significantly damaged friable miscellaneous ACM. (5) ACBM with potential for damage. (6) ACBM with potential for significant damage. (7) Any remaining friable ACBM or friable suspected ACBM. (c) Assessment may include the following considerations: (1) Location and the amount of the material, both in total quantity and as a percentage of the functional space. (2) Condition of the material, specifying: (i) Type of damage or significant damage (e.g., flaking, blistering, water damage, or other signs of physical damage). (ii) Severity of damage (e.g., major flaking, severely torn jackets, as opposed to occasional flaking, minor tears to jackets). (iii) Extent or spread of damage over large areas or large percentages of the homogeneous area. (3) Whether the material is accessible. (4) The material's potential for disturbance. (5) Known or suspected causes of damage or significant damage (e.g., air erosion, vandalism, vibration, water). (6) Preventive measures which might eliminate the reasonable likelihood of undamaged ACM from becoming sig… | ||||
| 40:40:34.0.1.1.9.2.1.8 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.90 Response actions. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 53 FR 12525, Apr. 15, 1988; 60 FR 31922, June 19, 1995; 60 FR 34465, July 3, 1995; 69 FR 18803, Apr. 9, 2004; 77 FR 46292, Aug. 3, 2012] | (a) The local education agency shall select and implement in a timely manner the appropriate response actions in this section consistent with the assessment conducted in § 763.88. The response actions selected shall be sufficient to protect human health and the environment. The local education agency may then select, from the response actions which protect human health and the environment, that action which is the least burdensome method. Nothing in this section shall be construed to prohibit removal of ACBM from a school building at any time, should removal be the preferred response action of the local education agency. (b) If damaged or significantly damaged thermal system insulation ACM is present in a building, the local education agency shall: (1) At least repair the damaged area. (2) Remove the damaged material if it is not feasible, due to technological factors, to repair the damage. (3) Maintain all thermal system insulation ACM and its covering in an intact state and undamaged condition. (c)(1) If damaged friable surfacing ACM or damaged friable miscellaneous ACM is present in a building, the local education agency shall select from among the following response actions: encapsulation, enclosure, removal, or repair of the damaged material. (2) In selecting the response action from among those which meet the definitional standards in § 763.83, the local education agency shall determine which of these response actions protects human health and the environment. For purposes of determining which of these response actions are the least burdensome, the local education agency may then consider local circumstances, including occupancy and use patterns within the school building, and its economic concerns, including short- and long-term costs. (d) If significantly damaged friable surfacing ACM or significantly damaged friable miscellaneous ACM is present in a building the local education agency shall: (1) Immediately isolate the functional space and restrict access, unless isolation is not necessary to pro… | |||
| 40:40:34.0.1.1.9.2.1.9 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | E | Subpart E—Asbestos-Containing Materials in Schools | § 763.91 Operations and maintenance. | EPA | [52 FR 41846, Oct. 30, 1987, as amended at 65 FR 69216, Nov. 15, 2000] | (a) Applicability. The local education agency shall implement an operations, maintenance, and repair (O&M) program under this section whenever any friable ACBM is present or assumed to be present in a building that it leases, owns, or otherwise uses as a school building. Any material identified as nonfriable ACBM or nonfriable assumed ACBM must be treated as friable ACBM for purposes of this section when the material is about to become friable as a result of activities performed in the school building. (b) Worker protection. Local education agencies must comply with either the OSHA Asbestos Construction Standard at 29 CFR 1926.1101, or the Asbestos Worker Protection Rule at 40 CFR 763.120, whichever is applicable. (c) Cleaning —(1) Initial cleaning. Unless the building has been cleaned using equivalent methods within the previous 6 months, all areas of a school building where friable ACBM, damaged or significantly damaged thermal system insulation ACM, or friable suspected ACBM assumed to be ACM are present shall be cleaned at least once after the completion of the inspection required by § 763.85(a) and before the initiation of any response action, other than O&M activities or repair, according to the following procedures: (i) HEPA-vacuum or steam-clean all carpets. (ii) HEPA-vacuum or wet-clean all other floors and all other horizontal surfaces. (iii) Dispose of all debris, filters, mopheads, and cloths in sealed, leak-tight containers. (2) Additional cleaning. The accredited management planner shall make a written recommendation to the local education agency whether additional cleaning is needed, and if so, the methods and frequency of such cleaning. (d) Operations and maintenance activities. The local education agency shall ensure that the procedures described below to protect building occupants shall be followed for any operations and maintenance activities disturbing friable ACBM: (1) Restrict entry into the area by persons other than those necessary to perform the maintenance project, eit… | |||
| 40:40:34.0.1.1.9.4.1.1 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | G | Subpart G—Asbestos Worker Protection | § 763.120 What is the purpose of this subpart? | EPA | This subpart protects certain State and local government employees who are not protected by the Asbestos Standards of the Occupational Safety and Health Administration (OSHA). This subpart applies the OSHA Asbestos Standards in 29 CFR 1910.1001 and 29 CFR 1926.1101 to these employees. | ||||
| 40:40:34.0.1.1.9.4.1.2 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | G | Subpart G—Asbestos Worker Protection | § 763.121 Does this subpart apply to me? | EPA | If you are a State or local government employer and you are not subject to a State asbestos standard that OSHA has approved under section 18 of the Occupational Safety and Health Act or a State asbestos plan that EPA has exempted from the requirements of this subpart under § 763.123, you must follow the requirements of this subpart to protect your employees from occupational exposure to asbestos. | ||||
| 40:40:34.0.1.1.9.4.1.3 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | G | Subpart G—Asbestos Worker Protection | § 763.122 What does this subpart require me to do? | EPA | If you are a State or local government employer whose employees perform: (a) Construction activities identified in 29 CFR 1926.1101(a), you must: (1) Comply with the OSHA standards in 29 CFR 1926.1101. (2) Submit notifications required for alternative control methods to the Director, National Program Chemicals Division (7404), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460. (b) Custodial activities not associated with the construction activities identified in 29 CFR 1926.1101(a), you must comply with the OSHA standards in 29 CFR 1910.1001. (c) Repair, cleaning, or replacement of asbestos-containing clutch plates and brake pads, shoes, and linings, or removal of asbestos-containing residue from brake drums or clutch housings, you must comply with the OSHA standards in 29 CFR 1910.1001. | ||||
| 40:40:34.0.1.1.9.4.1.4 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | G | Subpart G—Asbestos Worker Protection | § 763.123 May a State implement its own asbestos worker protection plan? | EPA | This section describes the process under which a State may be exempted from the requirements of this subpart. (a) States seeking an exemption. If your State wishes to implement its own asbestos worker protection plan, rather than complying with the requirements of this subpart, your State must apply for and receive an exemption from EPA. (1) What must my State do to apply for an exemption? To apply for an exemption from the requirements of this subpart, your State must send to the Director of EPA's Office of Pollution Prevention and Toxics (OPPT) a copy of its asbestos worker protection regulations and a detailed explanation of how your State's asbestos worker protection plan meets the requirements of TSCA section 18 (15 U.S.C. 2617). (2) What action will EPA take on my State's application for an exemption? EPA will review your State's application and make a preliminary determination whether your State's asbestos worker protection plan meets the requirements of TSCA section 18. (i) If EPA's preliminary determination is that your State's plan does meet the requirements of TSCA section 18, EPA will initiate a rulemaking, including an opportunity for public comment, to exempt your State from the requirements of this subpart. After considering any comments, EPA will issue a final rule granting or denying the exemption. (ii) If EPA's preliminary determination is that the State plan does not meet the requirements of TSCA section 18, EPA will notify your State in writing and will give your State a reasonable opportunity to respond to that determination. (iii) If EPA does not grant your State an exemption, then the State and local government employers in your State are subject to the requirements of this subpart. (b) States that have been granted an exemption. If EPA has exempted your State from the requirements of this subpart, your State must update its asbestos worker protection regulations as necessary to implement changes to meet the requirements of this subpart, and must apply to EPA for an amendment… | ||||
| 40:40:34.0.1.1.9.6.1.1 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.160 Scope. | EPA | This subpart prohibits the manufacture, importation, processing, and distribution in commerce of the asbestos-containing products identified and at the dates indicated in §§ 763.165, 763.167, and 763.169. This subpart requires that products subject to this rule's bans, but not yet subject to a ban on distribution in commerce, be labeled. This subpart also includes general exemptions and procedures for requesting exemptions from the provisions of this subpart. | ||||
| 40:40:34.0.1.1.9.6.1.10 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.178 Recordkeeping. | EPA | [54 FR 29507, July 12, 1989, as amended at 54 FR 46898, Nov. 8, 1989; 58 FR 34205, June 23, 1993] | (a) Inventory. (1) Each person who is subject to the prohibitions imposed by §§ 763.165 and 763.167 must perform an inventory of the stock-on-hand of each banned product as of the effective date of the ban for that product for the applicable activity. (2) The inventory shall be in writing and shall include the type of product, the number of product units currently in the stock-on-hand of the person performing the inventory, and the location of the stock. (3) Results of the inventory for a banned product must be maintained by the person for 3 years after the effective date of the § 763.165 or § 763.167 ban on the product. (b) Records. (1) Each person whose activities are subject to the bans imposed by §§ 763.165, 763.167, and 763.169 for a product must, between the effective date of the § 763.165 or § 763.167 ban on the product and the § 763.169 ban on the product, keep records of all commercial transactions regarding the product, including the dates of purchases and sales and the quantities purchased or sold. These records must be maintained for 3 years after the effective date of the § 763.169 ban for the product. (2) Each person who is subject to the requirements of § 763.171 must, for each product required to be labeled, maintain a copy of the label used in compliance with § 763.171. These records must be maintained for 3 years after the effective date of the ban on distribution in commerce for the product for which the § 763.171 requirements apply. | |||
| 40:40:34.0.1.1.9.6.1.11 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.179 Confidential business information claims. | EPA | (a) Applicants for exemptions under § 763.173 may assert a Confidential Business Information (CBI) claim for information in an exemption application or supplement submitted to the Agency under this subpart only if the claim is asserted in accordance with this section, and release of the information would reveal trade secrets or confidential commercial or financial information, as provided in section 14(a) of the Act. Information covered by a CBI claim will be treated in accordance with the procedures set forth in 40 CFR part 2, subpart B. The Agency will place all information not claimed as CBI in the manner described in this section in a public file without further notice to the applicant. (b) Applicants may assert CBI claims only at the time they submit a completed exemption application and only in the specified manner. If no such claim accompanies the information when it is received by the Agency, the information may be made available to the public without further notice to the applicant. Submitters that claim information as business confidential must do so by writing the word “Confidential” at the top of the page on which the information appears and by underlining, circling, or placing brackets ([ ]) around the information claimed CBI. (c) Applicants who assert a CBI claim for submitted information must provide the Agency with two copies of their exemption application. The first copy must be complete and contain all information being claimed as CBI. The second copy must contain only information not claimed as CBI. The Agency will place the second copy of the submission in a public file. Failure to furnish a second copy of the submission when information is claimed as CBI in the first copy will be considered a presumptive waiver of the claim of confidentiality. The Agency will notify the applicant by certified mail that a finding of a presumptive waiver of the claim of confidentiality has been made. The applicant has 30 days from the date of receipt of notification to submit the required second copy. Failure… | ||||
| 40:40:34.0.1.1.9.6.1.2 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.163 Definitions. | EPA | [59 FR 33208, June 28, 1994] | For purposes of this subpart: Act means the Toxic Substances Control Act, 15 U.S.C. 2601 et seq. Agency means the United States Environmental Protection Agency. Asbestos means the asbestiform varieties of: chrysotile (serpentine); crocidolite (riebeckite); amosite (cummingtonite-grunerite); tremolite; anthophyllite; and actinolite. Asbestos-containing product means any product to which asbestos is deliberately added in any concentration or which contains more than 1.0 percent asbestos by weight or area. Chemical substance, has the same meaning as in section 3 of the Act. Commerce has the same meaning as in section 3 of the Act. Commercial paper means an asbestos-containing product which is made of paper intended for use as general insulation paper or muffler paper. Major applications of commercial papers are insulation against fire, heat transfer, and corrosion in circumstances that require a thin, but durable, barrier. Corrugated paper means an asbestos-containing product made of corrugated paper, which is often cemented to a flat backing, may be laminated with foils or other materials, and has a corrugated surface. Major applications of asbestos corrugated paper include: thermal insulation for pipe coverings; block insulation; panel insulation in elevators; insulation in appliances; and insulation in low-pressure steam, hot water, and process lines. Customs territory of the United States means the 50 States, Puerto Rico, and the District of Columbia. Distribute in commerce has the same meaning as in section 3 of the Act, but the term does not include actions taken with respect to an asbestos-containing product (to sell, resale, deliver, or hold) in connection with the end use of the product by persons who are users (persons who use the product for its intended purpose after it is manufactured or processed). The term also does not include distribution by manufacturers, importers, and processors, and other persons solely for purposes of disposal of an asbestos-containing product. Flooring fe… | |||
| 40:40:34.0.1.1.9.6.1.3 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.165 Manufacture and importation prohibitions. | EPA | [59 FR 33209, June 28, 1994] | (a) After August 27, 1990, no person shall manufacture or import the following asbestos-containing products, either for use in the United States or for export: flooring felt and new uses of asbestos. (b) After August 26, 1996, no person shall manufacture or import the following asbestos-containing products, either for use in the United States or for export: commercial paper, corrugated paper, rollboard, and specialty paper. (c) The import prohibitions of this subpart do not prohibit: (1) The import into the customs territory of the United States of products imported solely for shipment outside the customs territory of the United States, unless further repackaging or processing of the product is performed in the United States; or (2) Activities involving purchases or acquisitions of small quantities of products made outside the customs territory of the United States for personal use in the United States. | |||
| 40:40:34.0.1.1.9.6.1.4 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.167 Processing prohibitions. | EPA | [59 FR 33209, June 28, 1994] | (a) After August 27, 1990, no person shall process for any use, either in the United States or for export, any of the asbestos-containing products listed at § 763.165(a). (b) After August 26, 1996, no person shall process for any use, either in the United States or for export, any of the asbestos-containing products listed at § 763.165(b). | |||
| 40:40:34.0.1.1.9.6.1.5 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.169 Distribution in commerce prohibitions. | EPA | [59 FR 33209, June 28, 1994] | (a) After August 25, 1992, no person shall distribute in commerce, either for use in the United States or for export, any of the asbestos-containing products listed at § 763.165(a). (b) After August 25, 1997, no person shall distribute in commerce, either for use in the United States or for export, any of the asbestos-containing products listed at § 763.165(b). (c) A manufacturer, importer, processor, or any other person who is subject to a ban on distribution in commerce in paragraph (a) or (b) of this section must, within 6 months of the effective date of the ban of a specific asbestos-containing product from distribution in commerce, dispose of all their remaining stock-on-hand of that product, by means that are in compliance with applicable local, State, and Federal restrictions which are current at that time. | |||
| 40:40:34.0.1.1.9.6.1.6 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.171 Labeling requirements. | EPA | [59 FR 33209, June 28, 1994] | (a) After August 27, 1990, manufacturers, importers, and processors of all asbestos-containing products that are identified in § 763.165(a) shall label the products as specified in this subpart at the time of manufacture, import, or processing. This requirement includes labeling all manufacturers', importers', and processors' stock-on-hand as of August 27, 1990. (b) After August 25, 1995, manufacturers, importers, and processors of all asbestos-containing products that are identified in § 763.165(b), shall label the products as specified in this subpart at the time of manufacture, import, or processing. This requirement includes labeling all manufacturers', importers', and processors' stock-on-hand as of August 25, 1995. (c) The label shall be placed directly on the visible exterior of the wrappings and packaging in which the product is placed for sale, shipment, or storage. If the product has more than one layer of external wrapping or packaging, the label must be attached to the innermost layer adjacent to the product. If the innermost layer of product wrapping or packaging does not have a visible exterior surface larger than 5 square inches, either a tag meeting the requirements of paragraph (d) of this section must be securely attached to the product's innermost layer of product wrapping or packaging, or a label must be attached to the next outer layer of product packaging or wrapping. Any products that are distributed in commerce to someone other than the end user, shipped, or stored without packaging or wrapping must be labeled or tagged directly on a visible exterior surface of the product as described in paragraph (d) of this section. (d)(1) Labels must be either printed directly on product packaging or in the form of a sticker or tag made of plastic, paper, metal, or other durable substances. Labels must be attached in such a manner that they cannot be removed without defacing or destroying them. Product labels shall appear as in paragraph (d)(2) of this section and consist of block letters and numera… | |||
| 40:40:34.0.1.1.9.6.1.7 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.173 Exemptions. | EPA | [54 FR 29507, July 12, 1989; 54 FR 37531, Sept. 11, 1989, as amended at 54 FR 46898, Nov. 8, 1989; 59 FR 33210, June 28, 1994] | (a) Persons who are subject to the prohibitions imposed by § 763.165, § 763.167, or § 763.169 may file an application for an exemption. Persons whose exemption applications are approved by the Agency may manufacture, import, process, or distribute in commerce the banned product as specified in the Agency's approval of the application. No applicant for an exemption may continue the banned activity that is the subject of an exemption application after the effective date of the ban unless the Agency has granted the exemption or the applicant receives an extension under paragraph (b)(4) or (5) of this section. (b) Application filing dates. (1) Applications for products affected by the prohibitions under §§ 763.165(a) and 763.167(a) may be submitted at any time and will be either granted or denied by EPA as soon as is feasible. (2) Applications for products affected by the ban under § 763.169(a) may be submitted at any time and will be either granted or denied by EPA as soon as is feasible. (3) Applications for products affected by the ban under §§ 763.165(b) and 763.167(b) may not be submitted prior to February 27, 1995. Complete applications received after that date, but before August 25, 1995, will be either granted or denied by the Agency prior to the effective date of the ban for the product. Applications received after August 25, 1995, will be either granted or denied by EPA as soon as is feasible. (4) Applications for products affected by the ban under § 763.169(b) may not be submitted prior to February 26, 1996. Complete applications received after that date, but before August 26, 1996, will be either granted or denied by the Agency prior to the effective date of the ban for the product. Applications received after August 26, 1996, will be either granted or denied by EPA as soon as is feasible. (5) The Agency will consider an application for an exemption from a ban under § 763.169 for a product at the same time the applicant submits an application for an exemption from a ban under § 763.165 or § 763.167 f… | |||
| 40:40:34.0.1.1.9.6.1.8 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.175 Enforcement. | EPA | (a) Failure to comply with any provision of this subpart is a violation of section 15 of the Act (15 U.S.C. 2614). (b) Failure or refusal to establish and maintain records, or to permit access to or copying of records as required by section 11 of the Act (15 U.S.C. 2610) is a violation of section 15 of the Act (15 U.S.C. 2614). (c) Failure or refusal to permit entry or inspection as required by section 11 of the Act (15 U.S.C. 2610) is a violation of section 15 of the Act (15 U.S.C. 2614). (d) Violators may be subject to the civil and criminal penalties in section 16 of the Act (15 U.S.C. 2615) for each violation. (e) The Agency may seek to enjoin the manufacture, import, processing, or distribution in commerce of asbestos-containing products in violation of this subpart, or act to seize any asbestos-containing products manufactured, imported, processed, or distributed in commerce in violation of this subpart, or take any other actions under the authority of section 7 or 17 of the Act (15 U.S.C. 2606 or 2616) that are appropriate. | ||||
| 40:40:34.0.1.1.9.6.1.9 | 40 | Protection of Environment | I | R | 763 | PART 763—ASBESTOS | I | Subpart I—Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements | § 763.176 Inspections. | EPA | The Agency will conduct inspections under section 11 of the Act (15 U.S.C. 2610) to ensure compliance with this subpart. | ||||
| 7:7:7.1.1.4.14.0.9.1 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.1 Introduction. | FSA | (a) Purpose. The Land Contract Guaranteed Program provides certain financial guarantees to the seller of a farm through a land contract sale to a beginning farmer or a socially disadvantaged farmer. (b) Types of guarantee. The seller may request either of the following: (1) The prompt payment guarantee plan. The Agency will guarantee an amount not to exceed three amortized annual installments plus an amount equal to the total cost of any related real estate taxes and insurance incurred during the period covered by the annual installment; or (2) The standard guarantee plan. The Agency will guarantee an amount equal to 90 percent of the outstanding principal under the land contract. (c) Guarantee period. The guarantee period is 10 years for either plan regardless of the term of the land contract. | ||||||
| 7:7:7.1.1.4.14.0.9.10 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.10 Feasibility. | FSA | (a) The buyer's proposed operation as described in a form acceptable to the Agency must represent the operating cycle for the farm operation and must project a feasible plan as defined in § 761.2(b) of this chapter. (b) The projected income, expenses, and production estimates: (1) Must be based on the buyer's last 3 years actual records of production and financial management unless the buyer has been farming less than 3 years; (2) For those farming less than 3 years, a combination of any actual history and other reliable sources of information may be used. Sources must be documented and acceptable to the Agency; and (3) May deviate from historical performance if deviations are the direct result of specific changes in the operation, reasonable, justified, documented, and acceptable to the Agency. (c) Price forecasts used in the plan must be reasonable, documented, and acceptable to the Agency. (d) The Agency will analyze the buyer's business ventures other than the farm operation to determine their soundness and contribution to the operation. (e) When a feasible plan depends on income from sources other than from owned land, the income must be dependable and likely to continue. (f) When the buyer's farm operating plan is developed in conjunction with a proposed or existing Agency direct loan, the two farm operating plans must be consistent. | ||||||
| 7:7:7.1.1.4.14.0.9.11 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.11 Maximum loss amount, guarantee period, and conditions. | FSA | (a) Maximum loss amount. The maximum loss amount due to nonpayment by the buyer covered by the guarantee is based on the type of guarantee initially selected by the seller as follows: (1) The prompt payment guarantee will cover: (i) Three amortized annual installments; or (ii) An amount equal to three annual installments (including an amount equal to the total cost of any tax and insurance incurred during the period covered by the annual installments). (2) The standard guarantee will cover an amount equal to 90 percent of the outstanding principal balance. (b) Guarantee period. The period of the guarantee will be 10 years from the effective date of the guarantee unless terminated earlier under § 763.23. (c) Conditions. The seller will select an escrow agent to service a Land Contract Agreement if selecting the prompt payment guarantee plan, and a servicing agent to service a Land Contract Agreement if selecting the standard guarantee plan. (1) An escrow agent must provide the Agency evidence of being a bonded title insurance company, attorney, financial institution or fiscally responsible institution. (2) A servicing agent must provide the Agency evidence of being a bonded commercial lending institution or similar entity, registered and authorized to provide escrow and collection services in the State in which the real estate is located. | ||||||
| 7:7:7.1.1.4.14.0.9.12 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.12 Down payment, rates, terms, and installments. | FSA | (a) Down payment. The buyer must provide a minimum down payment of five percent of the purchase price of the farm. (b) Interest rate. The interest rate charged by the seller must be fixed at a rate not to exceed the Agency's direct FO loan interest rate in effect at the time the guarantee is issued, plus three percentage points. The seller and buyer may renegotiate the interest rate for the remaining term of the contract following expiration of the guarantee. (c) Land contract terms. The contract payments must be amortized for a minimum of 20 years and payments on the contract must be of equal amounts during the term of the guarantee. (d) Balloon installments. Balloon payments are prohibited during the 10-year term of the guarantee. | ||||||
| 7:7:7.1.1.4.14.0.9.13 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.13 Fees. | FSA | (a) Payment of fees. The seller and buyer will be responsible for payment of any expenses or fees necessary to process the Land Contract Agreement required by the State or County to ensure that proper title is vested in the seller including, but not limited to, attorney fees, recording costs, and notary fees. (b) [Reserved] | ||||||
| 7:7:7.1.1.4.14.0.9.14 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.14 Appraisals. | FSA | (a) Standard guarantee plan. For the standard guarantee plan, the value of real estate to be purchased will be established by an appraisal obtained at Agency expense and completed as specified in § 761.7 of this chapter. An appraisal is required prior to, or as a condition of, approval of the guarantee. (b) Prompt payment guarantee plan. The Agency may, at its option and expense, obtain an appraisal to determine value of real estate to be purchased under the Prompt Payment Guarantee plan. | ||||||
| 7:7:7.1.1.4.14.0.9.15 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.15 Taxes and insurance. | FSA | (a) The seller will ensure that taxes and insurance on the real estate are paid timely and will provide the evidence of payment to the escrow or servicing agent. (b) The seller will maintain flood insurance, if available, if buildings are located in a special 100-year floodplain as defined by FEMA flood hazard area maps. (c) The seller will report any insurance claim and use of proceeds to the escrow or servicing agent. | ||||||
| 7:7:7.1.1.4.14.0.9.16 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.16 Environmental regulation compliance. | FSA | [76 FR 75430, Dec. 2, 2011, as amended at 81 FR 51284, Aug. 3, 2016] | (a) Environmental compliance requirements. The environmental requirements contained in part 799 of this chapter must be met prior to approval of guarantee request. (b) Determination. The Agency determination of whether an environmental problem exists will be based on: (1) The information supplied with the application; (2) Environmental resources available to the Agency including, but not limited to, documents, third parties, and government agencies; (3) Other information supplied by the buyer or seller upon Agency request; and (4) A visit to the farm. | |||||
| 7:7:7.1.1.4.14.0.9.17 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.17 Approving application and executing guarantee. | FSA | (a) Approval is subject to the availability of funds, meeting the requirements in this part, and the participation of an approved escrow or servicing agent, as applicable. (b) Upon approval of the guarantee, all parties (buyer, seller, escrow or servicing agent, and Agency official) will execute the Agency's guarantee agreement. (c) The “Land Contract Agreement for Prompt Payment Guarantee” or the “Land Contract Agreement for Standard Guarantee” will describe the conditions of the guarantee, outline the covenants and any agreements of the buyer, seller, escrow or servicing agent, and the Agency, and outline the process for payment of loss claims. | ||||||
| 7:7:7.1.1.4.14.0.9.18 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.18 General servicing responsibilities. | FSA | (a) For the prompt payment guarantee plan, the seller must use a third party escrow agent approved by the Agency. The escrow agent will: (1) Provide the Agency a copy of the recorded Land Contract; (2) Handle transactions relating to the Land Contract between the buyer and seller; (3) Receive Land Contract installment payments from the buyer and send them to the seller; (4) Provide evidence to the Agency that property taxes are paid and insurance is kept current on the security property; (5) Send a notice of payment due to the buyer at least 30 days prior to the installment due date; (6) Notify the Agency and the seller if the buyer defaults; (7) Service delinquent accounts as specified in § 763.20(a); (8) Make demand on the Agency to pay missed payments; (9) Send the seller any missed payment amount paid by the Agency under the guarantee; (10) Notify the Agency on March 31 and September 30 of each year of the outstanding balance on the Land Contract and the status of payment; and (11) Perform other duties as required by State law and as agreed to by the buyer and the seller; (b) For the standard guarantee plan, the seller must use a third party servicing agent approved by the Agency. The servicing agent will: (1) Provide the Agency a copy of the recorded Land Contract; (2) Handle transactions relating to the Land Contract between the buyer and seller; (3) Receive Land Contract installment payments from the buyer and send them to the seller; (4) Provide evidence to the Agency that property taxes are paid and insurance is kept current on the security property; (5) Perform a physical inspection of the farm each year during the term of the guarantee, and provide an annual inspection report to the Agency; (6) Obtain from the buyer a current balance sheet, income statement, cash flow budget, and any additional information needed, perform, and provide the Agency an analysis of the buyer's financial condition on an annual basis; (7) Notify the Agency on March 31 and September 30 of each year of the ou… | ||||||
| 7:7:7.1.1.4.14.0.9.19 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.19 Contract modification. | FSA | (a) The seller and buyer may modify the land contract to lower the interest rate and corresponding amortized payment amount without Agency approval. (b) With prior written approval from the Agency, the seller and buyer may modify the land contract provided that, in addition to a feasible plan for the upcoming operating cycle, a feasible plan can be reasonably projected throughout the remaining term of the guarantee. Such modifications may include but are not limited to: (1) Deferral of installments, (2) Leasing or subleasing, and (3) Partial releases. All proceeds from a partial release or royalties from mineral extraction must be applied to a prior lien, if one exists, and in addition, the same amount must be credited to the principal balance of the land contract. (4) Transfer and assumption. If the guarantee is to remain in effect, any transfer of the property and assumption of the guaranteed debt must be made to an eligible buyer for the Land Contract Guarantee Program as specified in § 763.5(b), and must be approved by the Agency in writing. If an eligible buyer for transfer and assumption cannot be found, the Deputy Administrator for Farm Loan Programs may make an exception to this requirement when in the Government's best financial interests. (5) Assignment. The seller may not assign the contract to another party without written consent of the Agency. (c) Any contract modifications other than those listed above must be approved by the Deputy Administrator for Farm Loan Programs, and will only be approved if such action is determined permissible by law and in the Government's best financial interests. | ||||||
| 7:7:7.1.1.4.14.0.9.2 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.2 Abbreviations and definitions. | FSA | Abbreviations and definitions for terms used in this part are in § 761.2 of this chapter. | ||||||
| 7:7:7.1.1.4.14.0.9.20 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.20 Delinquent servicing and collecting on guarantee. | FSA | (a) Prompt payment guarantee plan. If the buyer fails to pay an annual amortized installment or a portion of an installment on the contract or taxes or insurance when due, the escrow agent: (1) Must make a written demand on the buyer for payment of the defaulted amount within 30 days of the missed payment, taxes, or insurance and send a copy of the demand letter to the Agency and to the seller; and (2) Must make demand on the Agency within 90 days from the original payment, taxes, or insurance due date, for the missed payment in the event the buyer has not made the payment. (b) Standard guarantee plan. If the buyer fails to pay an annual amortized installment or a portion of an installment on the contract, then the seller has the option of either liquidating the real estate, or having the amount of the loss established by the Agency by an appraisal of the real estate. For either option, the servicing agent: (1) Must make a written demand on the buyer for payment of the defaulted amount within 30 days of the missed payment, and send a copy of the demand letter to the Agency and to the seller; and (2) Must immediately inform the Agency which option the seller has chosen for establishing the amount of the loss, in the event the buyer does not make the payment within 60 days of the demand letter. (i) Liquidation method. If the seller chooses the liquidation method, the servicing agent will: (A) Submit a liquidation plan to the Agency within 120 days from the missed payment for approval prior to any liquidation action. The Agency may require and pay for an appraisal prior to approval of the liquidation plan. (B) Complete liquidation within 12 months of the missed installment unless prevented by bankruptcy, redemption rights, or other legal action. (C) Credit an amount equal to the sale price received in a liquidation of the security property, with no deduction for expenses, to the principal balance of the land contract. (D) File a loss claim immediately after liquidation, which must include a complete … | ||||||
| 7:7:7.1.1.4.14.0.9.21 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.21 Establishment of Federal debt and Agency recovery of loss claim payments. | FSA | (a) Any amount paid by FSA as a result of an approved loss claim is immediately due and payable by the buyer after FSA notifies the buyer that a loss claim has been paid to the seller. If the debt is not restructured into a repayment plan or the obligation otherwise cured, FSA may use all remedies available, including offset as authorized by the Debt Collection Improvement Act of 1996, to collect the debt. (1) Interest on the debt will be at the FLP non-program real property loan rate in effect at the time of the first Agency payment of a loss claim. (2) The debt may be scheduled for repayment consistent with the buyer's repayment ability, not to exceed 7 years. Before any payment plan can be approved, the buyer must provide the Agency with the best lien obtainable on all of the buyer's assets. This includes the buyer's ownership interest in the real estate under contract for guarantees using the prompt payment guarantee plan. When the buyer is an entity, the best lien obtainable will be taken on all of the entity's assets, and all assets owned by individual members of the entity, including their ownership interest in the real estate under contract. (b) Annually, buyers with an Agency approved repayment plan under this section will supply the Agency a current balance sheet, income statement, cash flow budget, complete copy of Federal income tax returns, and any additional information needed to analyze the buyer's financial condition. (c) If a buyer fails to make required payments to the Agency as specified in the approved repayment plan, the debt will be treated as a non-program loan debt, and servicing will proceed as specified in § 766.351(c) of this chapter. | ||||||
| 7:7:7.1.1.4.14.0.9.22 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.22 Negligence and negligent servicing. | FSA | (a) The Agency may deny a loss claim in whole or in part due to negligence that contributed to the loss claim. This could include, but is not limited to: (1) The escrow and servicing agent failing to seek payment of a missed installment from the buyer within the prescribed timeframe or otherwise does not enforce the terms of the land contract; (2) Losing the collateral to a third party, such as a taxing authority, prior lien holder, etc; (3) Not performing the duties and responsibilities required of the escrow or servicing agent; (4) The seller's failure to disclose environmental issues; or (5) Any other action in violation of the land contract or guarantee agreement that does not terminate the guarantee. (b) [Reserved] | ||||||
| 7:7:7.1.1.4.14.0.9.23 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.23 Terminating the guarantee. | FSA | (a) The guarantee and the Agency's obligations will terminate at the earliest of the following circumstances: (1) Full payment of the land contract; (2) Agency payment to the seller of 3 annual installments plus property taxes and insurance, if applicable, under the prompt payment guarantee plan, if not repaid in full by the buyer. An Agency approved repayment plan will not constitute payment in full until such time as the entire amount due for the Agency approved repayment plan is paid in full; (3) Payment of a loss claim through the standard guarantee plan; (4) Sale of real estate without guarantee being properly assigned; (5) The seller terminates the land contract for reasons other than monetary default; or (6) If for any reason the land contract becomes null and void. (b) If none of the events in paragraph (a) of this section occur, the guarantee will automatically expire, without notice, 10 years from the effective date of the guarantee. | ||||||
| 7:7:7.1.1.4.14.0.9.3 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.3 Full faith and credit. | FSA | (a) The land contract guarantee constitutes an obligation supported by the full faith and credit of the United States. The Agency may contest the guarantee only in cases of fraud or misrepresentation by the seller, in which: (1) The seller had actual knowledge of the fraud or misrepresentation at the time it because the seller, or (2) The seller participated in or condoned the fraud or misrepresentation. (b) Loss claims also may be reduced or denied to the extent that any negligence contributed to the loss under § 763.22. | ||||||
| 7:7:7.1.1.4.14.0.9.4 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.4 Authorized land contract purpose. | FSA | The Agency will only guarantee the Contract installments, real estate taxes and insurance; or outstanding principal balance for an eligible seller of a family farm, through a land contract sale to an eligible beginning or socially disadvantaged farmer. | ||||||
| 7:7:7.1.1.4.14.0.9.5 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.5 Eligibility. | FSA | [76 FR 75430, Dec. 2, 2011, as amended at 79 FR 60744, Oct. 8, 2014] | (a) Seller eligibility requirements. The private seller, and each entity member in the case of an entity seller, must: (1) Possess the legal capacity to enter into a legally binding agreement; (2) Not have provided false or misleading documents or statements during past or present dealings with the Agency; (3) Not be ineligible due to disqualification resulting from Federal Crop Insurance violation, according to 7 CFR part 718; and (4) Not be suspended or debarred under 2 CFR parts 180 and 417. (b) Buyer eligibility requirements. The buyer must meet the following requirements to be eligible for the Land Contract Guarantee Program: (1) Is a beginning farmer or socially disadvantaged farmer engaged primarily in farming in the United States after the guarantee is issued. (2) Is the owner and operator of a family farm after the Contract is completed. Ownership of the family farm operation or the farm real estate may be held either directly in the individual's name or indirectly through interest in a legal entity. In the case of an entity buyer: (i) Each entity member's ownership interest may not exceed the amount specified in the family farm definition in § 761.2 of this chapter. (ii) If the applicant has one or more embedded entities, at least 75 percent of the individual ownership interests of each embedded entity must be owned by members actively involved in managing or operating the family farm. (iii) An ownership entity must be authorized to own a farm in the state or states in which the farm is located. An operating entity must be authorized to operate a farm in the state or states in which the farm is located. (iv) If the entity members holding a majority interest are related by blood or marriage, at least one member of the entity must: (A) Operate the family farm and (B) Own the farm after the contract is completed; (v) If the entity members holding a majority interest are not related by blood or marriage, the entity members holding a majority interest must: (A) Operate the family farm; and… | |||||
| 7:7:7.1.1.4.14.0.9.6 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.6 Limitations. | FSA | (a) To qualify for a guarantee, the purchase price of the farm to be acquired through the land contract sale cannot exceed the lesser of: (1) $500,000 or (2) The current market value of the property. (b) A guarantee will not be issued if the appraised value of the farm is greater than $500,000. (c) Existing land contracts are not eligible for the Land Contract Guarantee Program. (d) Guarantees may not be used to establish or support a non-eligible enterprise. | ||||||
| 7:7:7.1.1.4.14.0.9.7 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.7 Application requirements. | FSA | [76 FR 75430, Dec. 2, 2011, as amended at 79 FR 60744, Oct. 8, 2014; 81 FR 51284, Aug. 3, 2016] | (a) Seller application requirements. A seller who contacts the Agency with interest in a guarantee under the Land Contract Guarantee Program will be sent the land contract letter of interest outlining specific program details. To formally request a guarantee on the proposed land contract, the seller, and each entity member in the case of an entity, must: (1) Complete, sign, date, and return the land contract letter of interest to the Agency, and (2) Provide the name, address, and telephone number of the chosen servicing or escrow agent. (b) Buyer application requirements. A complete application from the buyer will include: (1) The completed Agency application form; (2) A current financial statement (not older than 90 days); (3) If the buyer is an entity: (i) A complete list of entity members showing the address, citizenship, principal occupation, and the number of shares and percentage of ownership or stock held in the entity by each member, or the percentage of interest in the entity held by each member; (ii) A current financial statement for each member of the entity; (iii) A current financial statement for the entity itself; (iv) A copy of the entity's charter or any entity agreement, any articles of incorporation and bylaws, any certificate or evidence of current registration (in good standing), and a resolution adopted by the Board of Directors or entity members authorizing specified officers of the entity to apply for and obtain the land contract guarantee and execute required debt, security, and other instruments and agreements; and (v) In the form of a married couple applying as a joint operation, items in paragraphs (b)(3)(i) and (b)(3)(iv) of this section will not be required. The Agency may request copies of the marriage license, prenuptial agreement, or similar documents as needed to verify loan eligibility and security. The information specified in paragraphs (b)(3)(ii) and (iii) of this section are only required to the extent needed to show the individual and joint finances of the hus… | |||||
| 7:7:7.1.1.4.14.0.9.8 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.8 Incomplete applications. | FSA | (a) Within 10 days of receipt of an incomplete application, the Agency will provide the seller and buyer written notice of any additional information that must be provided. The seller or buyer, as applicable, must provide the additional information within 20 calendar days of the date of the notice. (b) If the additional information is not received, the Agency will provide written notice that the application will be withdrawn if the information is not received within 10 calendar days of the date of the second notice. | ||||||
| 7:7:7.1.1.4.14.0.9.9 | 7 | Agriculture | VII | D | 763 | PART 763—LAND CONTRACT GUARANTEE PROGRAM | § 763.9 Processing complete applications. | FSA | Applications will be approved or rejected and all parties notified in writing no later than 30 calendar days after application is considered complete. |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);