cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
13 rows where part_number = 53 and title_number = 46 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name, amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 46:46:2.0.1.2.11.1.1.1 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.01 | Subpart 53.01—General Requirements | § 53.01-1 Incorporation by reference. | USCG | [USCG-2003-16630, 73 FR 65163, Oct. 31, 2008, as amended by USCG-2009-0702, 74 FR 49228, Sept. 25, 2009; USCG-2012-0832, 77 FR 59777, Oct. 1, 2012; USCG-2013-0671, 78 FR 60147, Sept. 30, 2013] | Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Coast Guard and the National Archives and Records Administration (NARA). Contact U.S. Coast Guard Headquarters at: Commandant (CG-ENG), Attn: Office of Design and Engineering Standards, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; phone (202) 372-1375; email typeapproval@uscg.mil . For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov . The material may be obtained from the following sources: (a) American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990; 800-843-2763; CustomerCare@asme.org; www.asme.org . (1) ASME BPVC.I-2019, 2019 ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers, 2019 Edition, issued July 1, 2019 (“Section I of the ASME BPVC”); IBR approved for § 53.01-10(e). (2) ASME BPVC.IV-2019, 2019 ASME Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers, 2019 Edition, issued July 1, 2019 (“Section IV of the ASME BPVC”); IBR approved for §§ 53.01-3; 53.01-5; 53.01-10(a); 53.05-1(a); 53.05-2(a); 53.05-3; 53.05-5; 53.10-1; 53.10-3(a); 53.10-10; 53.10-15; 53.12-1(a). (b) UL Solutions, 333 Pfingston Road, Northbrook, IL 60062; 847-272-8800; www.ul.com . (1) UL 174, Standard for Safety, Household Electric Storage Tank Water Heaters, Eleventh Edition, dated April 29, 2004, including revisions through December 15, 2016 (“UL 174”); IBR approved for § 53.01-10(c). (2) UL 1453, Standard for Safety, Electric Booster and Co… | |||
| 46:46:2.0.1.2.11.1.1.2 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.01 | Subpart 53.01—General Requirements | § 53.01-3 Adoption of Section IV of the ASME BPVC. | USCG | [CGFR 68-82, 33 FR 18826, Dec. 18, 1968, as amended by CGFR 69-127, 35 FR 9976, June 17, 1970; CGD 81-79, 50 FR 9435, Mar. 8, 1985. Redesignated and amended by CGD 88-032, 56 FR 35821, July 29, 1991; USCG-2003-16630, 73 FR 65163, Oct. 31, 2008] | (a) Heating boilers must be designed, constructed, inspected, tested, and stamped in accordance with Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) as limited, modified, or replaced by specific requirements in this part. The provisions in the appendices to Section IV of the ASME BPVC are adopted and must be followed when the requirements in Section IV make them mandatory. For general information, table 1 to § 53.01-3(a) lists the various paragraphs in Section IV of the ASME BPVC that are limited, modified, or replaced by regulations in this part. Table 1 to § 53.01-3( a )—Limitations and Modifications in the Adoption of Section IV of the ASME BPVC Note 1 to table § 53.01-3(a): The references to specific provisions in Section IV of the ASME BPVC are coded. The first letter, such as “H,” refers to Section IV. The second letter, such as “G,” refers to a part or subpart in Section IV. The number following the letters refers to the numbered paragraph in the text of the part or subpart in Section IV. (b) References to the ASME BPVC, such as paragraph HG-307, indicate: (1) H = Section IV of the ASME BPVC. (2) G = Part containing general requirements. (3) 3 = Article in part. (4) 307 = Paragraph within Article 3. (c) When a paragraph or a section of the regulations in this part relates to Section IV of the ASME BPVC, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph, as follows: (1) (Modifies H__.) This indicates that the material in H__ is generally applicable but is being altered, amplified, or augmented. (2) (Replaces H__.) This indicates that H__ does not apply. (3) (Reproduces H__.) This indicates that H__ is being identically reproduced for convenience, not for emphasis. | |||
| 46:46:2.0.1.2.11.1.1.3 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.01 | Subpart 53.01—General Requirements | § 53.01-5 Scope (modifies HG-100). | USCG | [USCG-2003-16630, 73 FR 65163, Oct. 31, 2008] | (a) The regulations in this part apply to steam heating boilers, hot water boilers (which include hot water heating boilers and hot water supply boilers), and to appurtenances thereto. The requirements in this part must be used in conjunction with Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). Table 1 to § 54.01-5 of this subchapter gives a breakdown by parts in this subchapter of the regulations governing various types of pressure vessels and boilers. (b) (Modifies HG-100.) The requirements of part HG of Section IV of the ASME BPVC must be used except as noted otherwise in this part. | |||
| 46:46:2.0.1.2.11.1.1.4 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.01 | Subpart 53.01—General Requirements | § 53.01-10 Service restrictions and exceptions (replaces HG-101). | USCG | [CGFR 68-82, 33 FR 18826, Dec. 18, 1968, as amended by CGD 81-79, 50 FR 9435, Mar. 8, 1985; USCG-2003-16630, 73 FR 65163, Oct. 31, 2008] | (a) General. The service restrictions and exceptions must be as indicated in this section in lieu of the requirements of HG-101 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). (b) Service restrictions. (1) Boilers of wrought materials must be restricted to a maximum of 103 kPa gage (15 psig) for steam and a maximum of 689 kPa (100 psig) or 121 °C (250 °F) for hot water. If operating conditions exceed these limits, design and fabrications must be in accordance with part 52 of this subchapter. (2) Boilers of cast iron materials must be restricted to a maximum of 103 kPa gage (15 psig) for steam and to a maximum of 206 kPa gage (30 psig) or 121 °C (250 °F) for hot water. (c) Hot water supply boilers. (1) Electrically fired hot water supply boilers that have a capacity not greater than 454 liters (120 gallons), a heat input not greater than 58.6 kilowatts (200,000 Btu per hour), and are listed as approved under UL 174 or UL 1453 (both incorporated by reference; see § 53.01-1) are exempted from the requirements of this part provided they are protected by a pressure relief device. This relief device need not comply with § 53.05-2. (2) Oil fired hot water supply boilers are not exempted from the requirements of this part on the basis of size or heat input. (d) Exhaust gas boilers. Exhaust gas type boilers must be restricted to a working pressure equal to or less than 103 kPa gage (15 psig) and an operating temperature equal to or less than 454 °C (850 °F). The design temperature of parts exposed to the exhaust gas must be the maximum temperature that could normally be produced by the source of exhaust gas. This temperature must be verified by testing or by the manufacturer of the engine or other equipment producing the exhaust. (e) ASME BPVC Section I. Heating boilers whose operating conditions are within the service restrictions of paragraph (b)(1) of this section may be constructed in accordance with Section I of the ASME BPVC (incorporated by reference; see § 53.01-1). In ad… | |||
| 46:46:2.0.1.2.11.2.1.1 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.05 | Subpart 53.05—Pressure Relieving Devices (Article 4) | § 53.05-1 Safety valve requirements for steam boilers (modifies HG-400 and HG-401). | USCG | [CGD 81-79, 50 FR 9435, Mar. 8, 1985, as amended by USCG-2003-16630, 73 FR 65163, Oct. 31, 2008] | (a) The pressure relief valve requirements and the safety valve requirements for steam boilers must be as indicated in HG-400 and HG-401 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except as noted otherwise in this section. (b) Each steam boiler must have at least one safety valve. | |||
| 46:46:2.0.1.2.11.2.1.2 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.05 | Subpart 53.05—Pressure Relieving Devices (Article 4) | § 53.05-2 Relief valve requirements for hot water boilers (modifies HG-400.2). | USCG | [CGD 81-79, 50 FR 9435, Mar. 8, 1985, as amended by USCG-2003-16630, 73 FR 65163, Oct. 31, 2008] | (a) Relief valves. The relief valve requirements for hot water boilers must be as indicated in article 4 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except as noted otherwise in this section. (b) Hot water heating boilers. Each hot water heating boiler must have at least one safety relief valve. (c) Hot water supply boilers. Each hot water supply boiler must have at least one safety relief valve and a temperature relief valve or a pressure-temperature relief valve. The valve temperature setting must not be more than 99 °C (210 °F). | |||
| 46:46:2.0.1.2.11.2.1.3 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.05 | Subpart 53.05—Pressure Relieving Devices (Article 4) | § 53.05-3 Materials (modifies HG-401.2). | USCG | [USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | Materials for valves must be in accordance with HG-401.2 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except that nonmetallic materials may be used only for gaskets and packing. | |||
| 46:46:2.0.1.2.11.2.1.4 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.05 | Subpart 53.05—Pressure Relieving Devices (Article 4) | § 53.05-5 Discharge capacities and valve markings. | USCG | [USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | The discharge capacities and valve markings must be as indicated in HG-402 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). The discharge capacities must be certified by the National Board of Boiler and Pressure Vessel Inspectors. | |||
| 46:46:2.0.1.2.11.3.1.1 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.10 | Subpart 53.10—Tests, Inspection, Stamping, and Reporting (Article 5) | § 53.10-1 General. | USCG | [USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | The tests, inspection, stamping, and reporting of heating boilers must be as indicated in article 5, part HG of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except as noted otherwise in this subpart. | |||
| 46:46:2.0.1.2.11.3.1.2 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.10 | Subpart 53.10—Tests, Inspection, Stamping, and Reporting (Article 5) | § 53.10-3 Inspection and tests (modifies HG-500 through HG-540). | USCG | [CGD 81-79, 50 FR 9436, Mar. 8, 1985, as amended by USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | (a) The inspections required by HG-500 through HG-540 must be performed by the “Authorized Inspector” as defined in HG-515 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). The Authorized Inspector must hold a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors. After installation, heating boilers must be inspected for compliance with this part by a marine inspector. (b) Automatically controlled boilers must be subjected to the operating tests prescribed in part 63 of this subchapter. (c) All heating boilers must have the operation of their pressure relieving devices checked after the final installation. | |||
| 46:46:2.0.1.2.11.3.1.3 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.10 | Subpart 53.10—Tests, Inspection, Stamping, and Reporting (Article 5) | § 53.10-10 Certification by stamping. | USCG | [USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | Stamping of heating boilers must be as indicated in HG-530 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). | |||
| 46:46:2.0.1.2.11.3.1.4 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.10 | Subpart 53.10—Tests, Inspection, Stamping, and Reporting (Article 5) | § 53.10-15 Manufacturer's data report forms. | USCG | [USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | The manufacturer's data report forms required by HG-520 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) must be made available to the marine inspector for review. The Authorized Inspector's National Board commission number must be included on the manufacturer's data report forms. | |||
| 46:46:2.0.1.2.11.4.1.1 | 46 | Shipping | I | F | 53 | PART 53—HEATING BOILERS | 53.12 | Subpart 53.12—Instruments, Fittings, and Controls (Article 6) | § 53.12-1 General (modifies HG-600 through HG-640). | USCG | [CGFR 68-82, 33 FR 18826, Dec. 18, 1968, as amended by USCG-2003-16630, 73 FR 65164, Oct. 31, 2008] | (a) The instruments, fittings and controls for heating boilers must be as indicated in HG-600 through HG-640 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except as noted otherwise in this section. (b) For control systems for automatic auxiliary heating equipment, the requirements in part 63 of this subchapter govern and must be followed. |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);