cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
14 rows where part_number = 45 and title_number = 14 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 14:14:1.0.1.3.25.1.283.1 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | A | Subpart A—General | § 45.1 Applicability. | FAA | [Doc. No. 2047, 29 FR 3223, Mar. 11, 1964, as amended by Amdt. 45-3, 32 FR 188, Jan. 10, 1967; Amdt. 45-26, 74 FR 53394, Oct. 16, 2009; Doc. No. FAA-2015-7396, Amdt. 45-30, 80 FR 78645, Dec. 16, 2015] | This part prescribes the requirements for— (a) Marking products and articles manufactured under— (1) A type certificate; (2) A production approval as defined under part 21 of this chapter; and (3) The provisions of an agreement between the United States and another country or jurisdiction for the acceptance of products and articles; and (b) Nationality and registration marking of aircraft registered in the United States in accordance with part 47. | |||
| 14:14:1.0.1.3.25.2.283.1 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | B | Subpart B—Marking of Products and Articles | § 45.10 Marking. | FAA | [Doc. No. FAA-2006-25877, Amdt. 45-26, 74 FR 53394, Oct. 16, 2009] | No person may mark a product or article in accordance with this subpart unless— (a) That person produced the product or article — (1) Under part 21, subpart F, G, K, or O of this chapter; or (2) For export to the United States under the provisions of an agreement between the United States and another country or jurisdiction for the acceptance of products and articles; and (b) That product or article conforms to its approved design, and is in a condition for safe operation; and, for a TSO article; that TSO article meets the applicable performance standards. | |||
| 14:14:1.0.1.3.25.2.283.2 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | B | Subpart B—Marking of Products and Articles | § 45.11 Marking of products. | FAA | [Amdt. 45-26, 74 FR 53394, Oct. 16, 2009, as amended by Amdt. 45-27, 76 FR 7486, Feb. 10, 2011; Doc. No. FAA-2013-0933, Amdt. 21-98, 80 FR 59031, Oct. 1, 2015, as amended by Amdt. 21-98A, 80 FR 59031, Dec. 17, 2015] | (a) Aircraft. A manufacturer of aircraft covered under § 21.182 of this chapter must mark each aircraft by attaching a fireproof identification plate that— (1) Includes the information specified in § 45.13 using an approved method of fireproof marking; (2) Must be secured in such a manner that it will not likely be defaced or removed during normal service, or lost or destroyed in an accident; and (3) Except as provided in paragraphs (d) through (h) of this section, must be secured to the aircraft fuselage exterior so that it is legible to a person on the ground, and must be either adjacent to and aft of the rear-most entrance door or on the fuselage surface near the tail surfaces. (b) Aircraft engines. A manufacturer of an aircraft engine produced under a type certificate or production certificate must mark each engine by attaching a fireproof identification plate. Such plate— (1) Must include the information specified in § 45.13 using an approved method of fireproof marking; (2) Must be affixed to the engine at an accessible location; and (3) Must be secured in such a manner that it will not likely be defaced or removed during normal service, or lost or destroyed in an accident. (c) Propellers and propeller blades and hubs. Each person who produces a propeller, propeller blade, or propeller hub under a type certificate or production certificate must mark each product or part. Except for a fixed-pitch wooden propeller, the marking must be accomplished using an approved fireproof method. The marking must— (1) Be placed on a non-critical surface; (2) Contain the information specified in § 45.13; (3) Not likely be defaced or removed during normal service; and (4) Not likely be lost or destroyed in an accident. (d) Manned free balloons. A manufacturer of manned free balloons must mark each balloon by attaching the identification plate described in paragraph (a) of this section. The plate must be secured to the balloon envelope and must be located, if practicable, where it is legible to the operat… | |||
| 14:14:1.0.1.3.25.2.283.3 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | B | Subpart B—Marking of Products and Articles | § 45.13 Identification data. | FAA | [Amdt. 45-3, 32 FR 188, Jan. 10, 1967, as amended by Amdt. 45-10, 44 FR 45379, Aug. 2, 1979; Amdt. 45-12, 45 FR 60183, Sept. 11, 1980; Amdt. 45-20, 55 FR 32861, Aug. 10, 1990; 55 FR 37287, Sept. 10, 1990; Amdt. 45-26, 74 FR 53395, Oct. 16, 2009; Amdt. 45-28, 77 FR 76854, Dec. 31, 2012] | (a) The identification required by § 45.11 (a) through (c) must include the following information: (1) Builder's name. (2) Model designation. (3) Builder's serial number. (4) Type certificate number, if any. (5) Production certificate number, if any. (6) For aircraft engines, the established rating. (7) On or after January 1, 1984, for aircraft engines specified in part 34 of this chapter, the date of manufacture as defined in § 34.1 of this chapter, and a designation, approved by the FAA, that indicates compliance with the applicable exhaust emission provisions of part 34 of this chapter and 40 CFR part 87. Approved designations include COMPLY, EXEMPT, and NON-US, as appropriate. After December 31, 2012, approved designations also include EXEMPT NEW, and EXCEPTED SPARE, as appropriate. (i) The designation COMPLY indicates that the engine is in compliance with all of the applicable exhaust emissions provisions of part 34. For any engine with a rated thrust in excess of 26.7 kilonewtons (6000 pounds) which is not used or intended for use in commercial operations and which is in compliance with the applicable provisions of part 34, but does not comply with the hydrocarbon emissions standard of § 34.21(d), the statement “May not be used as a commercial aircraft engine” must be noted in the permanent powerplant record that accompanies the engine at the time of manufacture of the engine. (ii) The designation EXEMPT indicates that the engine has been granted an exemption pursuant to the applicable provision of § 34.7 (a)(1), (a)(4), (b), (c), or (d), and an indication of the type of exemption and the reason for the grant must be noted in the permanent powerplant record that accompanies the engine from the time of manufacture of the engine. (iii) The designation NON-US indicates that the engine has been granted an exemption pursuant to § 34.7(a)(1), and the notation “This aircraft may not be operated within the United States”, or an equivalent notation approved by the FAA, must be inserted in the aircraft logb… | |||
| 14:14:1.0.1.3.25.2.283.4 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | B | Subpart B—Marking of Products and Articles | § 45.15 Marking requirements for PMA articles, TSO articles, and Critical parts. | FAA | [Doc. No. FAA-2006-25877, 74 FR 53395, Oct. 16, 2009] | (a) PMA articles. The manufacturer of a PMA article must permanently and legibly mark— (1) Each PMA article, with the PMA holder's name, trademark, symbol, or other FAA approved identification and part number; and (2) The letters “FAA-PMA”. (b) TSO articles. The manufacturer of a TSO article must permanently and legibly mark — (1) Each TSO article with the TSO holder's name, trademark, symbol, or other FAA approved identification and part number; and (2) Each TSO article, unless otherwise specified in the applicable TSO, with the TSO number and letter of designation, all markings specifically required by the applicable TSO, and the serial number or the date of manufacture of the article or both. (c) Critical parts. Each person who manufactures a part for which a replacement time, inspection interval, or related procedure is specified in the Airworthiness Limitations section of a manufacturer's maintenance manual or Instructions for Continued Airworthiness must permanently and legibly mark that part with a serial number (or equivalent) unique to that part in addition to the other applicable requirements of this section. (d) If the FAA finds a part or article is too small or otherwise impractical to mark with any of the information required by this part, the manufacturer must attach that information to the part or its container. | |||
| 14:14:1.0.1.3.25.2.283.5 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | B | Subpart B—Marking of Products and Articles | § 45.16 Marking of life-limited parts. | FAA | [Doc. No. FAA-200-8017, 67 FR 2110, Jan. 15, 2002, as amended by Amdt. 45-26, 74 FR 53395, Oct. 16, 2009] | When requested by a person required to comply with § 43.10 of this chapter, the holder of a type certificate or design approval for a life-limited part must provide marking instructions, or must state that the part cannot be practicably marked without compromising its integrity. | |||
| 14:14:1.0.1.3.25.3.283.1 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.21 General. | FAA | [Doc. No. 8093, Amdt. 45-5, 33 FR 450, Jan. 12, 1968, as amended by Amdt. 45-17, 52 FR 34102, Sept. 9, 1987] | (a) Except as provided in § 45.22, no person may operate a U.S.-registered aircraft unless that aircraft displays nationality and registration marks in accordance with the requirements of this section and §§ 45.23 through 45.33. (b) Unless otherwise authorized by the FAA, no person may place on any aircraft a design, mark, or symbol that modifies or confuses the nationality and registration marks. (c) Aircraft nationality and registration marks must— (1) Except as provided in paragraph (d) of this section, be painted on the aircraft or affixed by any other means insuring a similar degree of permanence; (2) Have no ornamentation; (3) Contrast in color with the background; and (4) Be legible. (d) The aircraft nationality and registration marks may be affixed to an aircraft with readily removable material if— (1) It is intended for immediate delivery to a foreign purchaser; (2) It is bearing a temporary registration number; or (3) It is marked temporarily to meet the requirements of § 45.22(c)(1) or § 45.29(h) of this part, or both. | |||
| 14:14:1.0.1.3.25.3.283.2 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.22 Exhibition, antique, and other aircraft: Special rules. | FAA | [Doc. No. 8093, Amdt. 45-5, 33 FR 450, Jan. 12, 1968, as amended by Amdt. 45-13, 46 FR 48603, Oct. 1, 1981; Amdt. 45-19, 54 FR 39291, Sept. 25, 1989; Amdt. 45-18, 54 FR 34330, Aug. 18, 1989; Amdt. 45-21, 56 FR 65653, Dec. 17, 1991; Amdt. 45-22, 66 FR 21066, Apr. 27, 2001; Doc. No. FAA-2018-0119, Amdt. 45-31, 83 FR 9170, Mar. 5, 2018] | (a) When display of aircraft nationality and registration marks in accordance with §§ 45.21 and 45.23 through 45.33 would be inconsistent with exhibition of that aircraft, a U.S.-registered aircraft may be operated without displaying those marks anywhere on the aircraft if: (1) It is operated for the purpose of exhibition, including a motion picture or television production, or an airshow; (2) Except for practice and test fights necessary for exhibition purposes, it is operated only at the location of the exhibition, between the exhibition locations, and between those locations and the base of operations of the aircraft; and (3) For each flight in the United States: (i) It is operated with the prior approval of the responsible Flight Standards office, in the case of a flight within the lateral boundaries of the surface areas of Class B, Class C, Class D, or Class E airspace designated for the takeoff airport, or within 4.4 nautical miles of that airport if it is within Class G airspace; or (ii) It is operated under a flight plan filed under either § 91.153 or § 91.169 of this chapter describing the marks it displays, in the case of any other flight. (b) A small U.S.-registered aircraft built at least 30 years ago or a U.S.-registered aircraft for which an experimental certificate has been issued under § 21.191(d) or 21.191(g) for operation as an exhibition aircraft or as an amateur-built aircraft and which has the same external configuration as an aircraft built at least 30 years ago may be operated without displaying marks in accordance with §§ 45.21 and 45.23 through 45.33 if: (1) It displays in accordance with § 45.21(c) marks at least 2 inches high on each side of the fuselage or vertical tail surface consisting of the Roman capital letter “N” followed by: (i) The U.S. registration number of the aircraft; or (ii) The symbol appropriate to the airworthiness certificate of the aircraft (“C”, standard; “R”, restricted; “L”, limited; or “X”, experimental) followed by the U.S. registration number of the a… | |||
| 14:14:1.0.1.3.25.3.283.3 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.23 Display of marks; general. | FAA | [Doc. No. 8093, Amdt. 45-5, 33 FR 450, Jan. 12, 1968, as amended by Amdt. 45-9, 42 FR 41102, Aug. 15, 1977; Amdt. 45-24, 69 FR 44863, July 27, 2004; Amdt. 45-32, 90 FR 35211, July 24, 2025] | (a) Each operator of an aircraft must display on that aircraft marks consisting of the Roman capital letter “N” (denoting United States registration) followed by the registration number of the aircraft. Each suffix letter used in the marks displayed must also be a Roman capital letter. (b) Except for unmanned aircraft, when marks include only the Roman capital letter “N” and the registration number is displayed on limited, restricted, experimental, or provisionally certificated aircraft, the operator must also display on that aircraft near each entrance to the cabin, cockpit, or pilot station, in letters not less than 2 inches nor more than 6 inches high, the words “limited,” “restricted,” “experimental,” or “provisional,” as applicable. | |||
| 14:14:1.0.1.3.25.3.283.4 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.25 Location of marks on fixed-wing aircraft. | FAA | [Amdt. 45-9, 42 FR 41102, Aug. 15, 1977] | (a) The operator of a fixed-wing aircraft must display the required marks on either the vertical tail surfaces or the sides of the fuselage, except as provided in § 45.29(f). (b) The marks required by paragraph (a) of this section must be displayed as follows: (1) If displayed on the vertical tail surfaces, horizontally on both surfaces, horizontally on both surfaces of a single vertical tail or on the outer surfaces of a multivertical tail. However, on aircraft on which marks at least 3 inches high may be displayed in accordance with § 45.29(b)(1), the marks may be displayed vertically on the vertical tail surfaces. (2) If displayed on the fuselage surfaces, horizontally on both sides of the fuselage between the trailing edge of the wing and the leading edge of the horizontal stabilizer. However, if engine pods or other appurtenances are located in this area and are an integral part of the fuselage side surfaces, the operator may place the marks on those pods or appurtenances. | |||
| 14:14:1.0.1.3.25.3.283.5 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.27 Location of marks; nonfixed-wing aircraft. | FAA | [Doc. No. 2047, 29 FR 3223, Mar. 11, 1964, as amended by Amdt. 45-15, 48 FR 11392, Mar. 17, 1983; Amdt. 45-24, 69 FR 44863, July 27, 2004; Amdt. 45-25, 72 FR 52469, Sept. 14, 2007] | (a) Rotorcraft. Each operator of a rotorcraft must display on that rotorcraft horizontally on both surfaces of the cabin, fuselage, boom, or tail the marks required by § 45.23. (b) Airships. Each operator of an airship must display on that airship the marks required by § 45.23, horizontally on— (1) The upper surface of the right horizontal stabilizer and on the under surface of the left horizontal stabilizer with the top of the marks toward the leading edge of each stabilizer; and (2) Each side of the bottom half of the vertical stabilizer. (c) Spherical balloons. Each operator of a spherical balloon must display the marks required by § 45.23 in two places diametrically opposite and near the maximum horizontal circumference of that balloon. (d) Nonspherical balloons. Each operator of a nonspherical balloon must display the marks required by § 45.23 on each side of the balloon near its maximum cross section and immediately above either the rigging band or the points of attachment of the basket or cabin suspension cables. (e) Powered parachutes and weight-shift-control aircraft. Each operator of a powered parachute or a weight-shift-control aircraft must display the marks required by §§ 45.23 and 45.29(b)(2) of this part. The marks must be displayed in two diametrically opposite positions on the fuselage, a structural member, or a component of the aircraft and must be visible from the side of the aircraft. | |||
| 14:14:1.0.1.3.25.3.283.6 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.29 Size of marks. | FAA | [Doc. No. 2047, 29 FR 3223, Mar. 11, 1964, as amended by Amdt. 45-2, 31 FR 9863, July 21, 1966; Amdt. 45-9, 42 FR 41102, Aug. 15, 1977; Amdt. 45-13, 46 FR 48604, Oct. 1, 1981; Amdt. 45-15, 48 FR 11392, Mar. 17, 1983; Amdt. 45-17, 52 FR 34102, Sept. 9, 1987; 52 FR 36566, Sept. 30, 1987; Amdt. 45-24, 69 FR 44863, July 27, 2004; Amdt. 45-25, 72 FR 52469, Sept. 14, 2007; Amdt. 45-32, 90 FR 35211, July 24, 2025] | (a) Except as provided in paragraph (f) of this section, each operator of an aircraft must display marks on the aircraft meeting the size requirements of this section. (b) Height. Except as provided in paragraph (h) of this part, the nationality and registration marks must be of equal height and on— (1) Fixed-wing aircraft, must be at least 12 inches high, except that: (i) An aircraft displaying marks at least 2 inches high before November 1, 1981 and an aircraft manufactured after November 2, 1981, but before January 1, 1983, may display those marks until the aircraft is repainted or the marks are repainted, restored, or changed; (ii) Marks at least 3 inches high may be displayed on a glider; (iii) Marks at least 3 inches high may be displayed on an aircraft for which the FAA has issued an experimental airworthiness certificate under § 21.191(d), (g), (i), (k), or (l) of this chapter to operate as an exhibition aircraft, an amateur-built aircraft, or a former or kit-built light-sport category aircraft when the maximum cruising speed of the aircraft does not exceed 180 knots CAS; and (iv) Marks may be displayed on an exhibition, antique, or other aircraft in accordance with § 45.22. (2) Airships, spherical balloons, nonspherical balloons, powered parachutes, and weight-shift-control aircraft must be at least 3 inches high; and (3) Rotorcraft, must be at least 12 inches high, except that rotorcraft displaying before April 18, 1983, marks required by § 45.29(b)(3) in effect on April 17, 1983, and rotorcraft manufactured on or after April 18, 1983, but before December 31, 1983, may display those marks until the aircraft is repainted or the marks are repainted, restored, or changed. (c) Width. Characters must be two-thirds as wide as they are high, except the number “1”, which must be one-sixth as wide as it is high, and the letters “M” and “W” which may be as wide as they are high. (d) Thickness. Characters must be formed by solid lines one-sixth as thick as the character is high. (e) Spacing. The… | |||
| 14:14:1.0.1.3.25.3.283.7 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.31 Marking of export aircraft. | FAA | A person who manufactures an aircraft in the United States for delivery outside thereof may display on that aircraft any marks required by the State of registry of the aircraft. However, no person may operate an aircraft so marked within the United States, except for test and demonstration flights for a limited period of time, or while in necessary transit to the purchaser. | ||||
| 14:14:1.0.1.3.25.3.283.8 | 14 | Aeronautics and Space | I | C | 45 | PART 45—IDENTIFICATION AND REGISTRATION MARKING | C | Subpart C—Nationality and Registration Marks | § 45.33 Sale of aircraft; removal of marks. | FAA | [Amdt. 45-11, 44 FR 61938, Oct. 29, 1979] | When an aircraft that is registered in the United States is sold, the holder of the Certificate of Aircraft Registration must remove, before its delivery to the purchaser, all United States marks from the aircraft, unless the purchaser is— (a) A citizen of the United States; (b) An individual citizen of a foreign country who is lawfully admitted for permanent residence in the United States; or (c) When the aircraft is to be based and primarily used in the United States, a corporation (other than a corporation which is a citizen of the United States) lawfully organized and doing business under the laws of the United States or any State thereof. |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);