cfr_sections

Current Code of Federal Regulations (eCFR) — the actual text of federal regulations in force. Covers 19 CFR titles with 123,000+ regulatory sections and full-text search.

Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API

115 rows where part_number = 429 and title_number = 40 sorted by section_id

✎ View and edit SQL

This data as json, CSV (advanced)

Suggested facets: subpart, subpart_name, amendment_citations

title_number 1

  • 40 · 115 ✖

part_number 1

  • 429 · 115 ✖

agency 1

section_id ▼ title_number title_name chapter subchapter part_number part_name subpart subpart_name section_number section_heading agency authority source_citation amendment_citations full_text
40:40:32.0.1.1.5.0.2.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY       § 429.10 Applicability. EPA       This part applies to any timber products processing operation, and any plant producing insulation board with wood as the major raw material, which discharges or may discharge process wastewater pollutants to the waters of the United States, or which introduces or may introduce process wastewater pollutants into a publicly owned treatment works.
40:40:32.0.1.1.5.0.2.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY       § 429.11 General definitions. EPA     [46 FR 8285, Jan. 26, 1981, as amended at 46 FR 57287, Nov. 23, 1981; 69 FR 46045, July 30, 2004] In addition to the definitions set forth in 40 CFR part 401, the following definitions apply to this part: (a) The term “hydraulic barking” means a wood processing operation that removes bark from wood by the use of water under a pressure of 6.8 atm (100 psia) or greater. (b) The terms “cubic feet” or “cubic meters” of production in subpart A means the cubic feet or cubic meters of logs from which bark is removed. (c) The term “process wastewater” specifically excludes non-contact cooling water, material storage yard runoff (either raw material or processed wood storage), boiler blowdown, and wastewater from washout of thermal oxidizers or catalytic oxidizers, wastewater from biofilters, or wastewater from wet electrostatic precipitators used upstream of thermal oxidizers or catalytic oxidizers installed by facilities covered by subparts B, C, D or M to comply with the national emissions standards for hazardous air pollutants (NESHAP) for plywood and composite wood products (PCWP) facilities (40 CFR part 63, subpart DDDD). For the dry process hardboard, veneer, finishing, particleboard, and sawmills and planing mills subcategories, fire control water is excluded from the definition. (d) The term “gross production of fiberboard products” means the air dry weight of hardboard or insulation board following formation of the mat and prior to trimming and finishing operations. (e) The term “hardboard” means a panel manufactured from interfelted ligno-cellulosic fibers consolidated under heat and pressure to a density of 0.5 g/cu cm (31 lb/cu ft) or greater. (f) The term “insulation board” means a panel manufactured from interfelted ligno-cellulosic fibers consolidated to a density of less than 0.5 g/cu cm (less than 31 lb/cu ft). (g) The term “smooth-one-side (S1S) hardboard” means hardboard which is produced by the wet-matting, wet-pressing process. (h) The term “smooth-two-sides (S2S) hardboard” means hardboard which is produced by the wet-matting, dry-pressing process. (i) The term “debris” means woody mate…
40:40:32.0.1.1.5.0.2.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY       § 429.12 Monitoring requirements. [Reserved] EPA        
40:40:32.0.1.1.5.1.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.20 Applicability; description of the barking subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the barking of logs by plants in SIC major group 24, and by plants producing insulation board (SIC group 2661).
40:40:32.0.1.1.5.1.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.21 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations apply to all mechanical barking installations: There shall be no discharge of process wastewater pollutants into navigable waters. (b) The following limitations constitute the maximum permissible discharge for hydraulic barking installations: Subpart A 1 Within the range 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.1.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.1.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.23 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved] EPA        
40:40:32.0.1.1.5.1.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.24 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): (a) The following limitations apply to all mechanical barking installations: There shall be no discharge of process wastewater pollutants into navigable waters. (b) The following limitations constitute the maximum permissible discharge for hydraulic barking installations: Subpart A 1 Within the range 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.1.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.25 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.1.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY A Subpart A—Barking Subcategory   § 429.26 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.10.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.110 Applicability; description of the log washing subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the log washing process in which water under pressure is applied to logs for the purpose of removing foreign material from the surface of the log before further processing.
40:40:32.0.1.1.5.10.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.111 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): There shall be no discharge of process wastewater pollutants to navigable waters containing a total suspended solids concentration greater than 50 mg/l and the pH shall be within the range of 6.0 to 9.0.
40:40:32.0.1.1.5.10.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.112 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.10.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.113 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.10.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.114 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.10.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.115 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.10.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY J Subpart J—Log Washing Subcategory   § 429.116 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.11.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.120 Applicability; description of the sawmills and planing mills subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the timber products processing procedures that include all or part of the following operations: bark removal (other than hydraulic barking as defined in § 429.11 of this part), sawing, resawing, edging, trimming, planing and machining.
40:40:32.0.1.1.5.11.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.121 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.11.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.122 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.11.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.123 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.11.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.124 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.11.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.125 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.11.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY K Subpart K—Sawmills and Planing Mills Subcategory   § 429.126 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.12.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.130 Applicability; description of the finishing subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the drying, planing, dipping, staining, end coating, moisture proofing, fabrication, and by-product utilization timber processing operations not otherwise covered by specific guidelines and standards.
40:40:32.0.1.1.5.12.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.131 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.12.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.132 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.12.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.133 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subject must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.12.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.134 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.12.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.135 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.12.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY L Subpart L—Finishing Subcategory   § 429.136 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.13.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.140 Applicability; description of the particleboard manufacturing subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which manufactures particleboard.
40:40:32.0.1.1.5.13.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.141 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.13.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.142 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.13.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.143 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.13.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.144 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.13.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.145 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.13.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY M Subpart M—Particleboard Manufacturing Subcategory   § 429.146 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduce process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.14.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.150 Applicability; description of the insulation board subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from plants which produce insulation board using wood as the primary raw material. Specifically excluded from this subpart is the manufacture of insulation board from the primary raw material bagasse.
40:40:32.0.1.1.5.14.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.151 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): Subpart N 1 Within the range 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.14.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.152 [Reserved] EPA        
40:40:32.0.1.1.5.14.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.153 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved] EPA        
40:40:32.0.1.1.5.14.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.154 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.14.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.155 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.14.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY N Subpart N—Insulation Board Subcategory   § 429.156 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.15.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.160 Applicability; description of the wood furniture and fixture production without water wash spray booth(s) or without laundry facilities subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the manufacture of wood furniture and fixtures at establishments that (a) do not utilize water wash spray booths to collect and contain the overspray from spray applications of finishing materials and (b) do not maintain on-site laundry facilities for fabric utilized in various finishing operations.
40:40:32.0.1.1.5.15.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.161 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology limitations (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.15.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.162 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.15.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.163 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.15.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.164 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.15.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.165 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.15.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY O Subpart O—Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory   § 429.166 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.16.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.170 Applicability; description of the wood furniture and fixture production with water wash spray booth(s) or with laundry facilities subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the manufacture of wood furniture and fixtures at establishments that either (a) utilize water wash spray booth(s) to collect and contain the overspray from spray applications of finishing materials, or (b) utilize on-site laundry facilities for fabric utilized in various finishing operations.
40:40:32.0.1.1.5.16.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.171 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): Settleable solids shall be less than or equal to 0.2 ml/l and pH shall be between 6.0 and 9.0 at all times.
40:40:32.0.1.1.5.16.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.172 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.16.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.173 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants.
40:40:32.0.1.1.5.16.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.174 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants.
40:40:32.0.1.1.5.16.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.175 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.16.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY P Subpart P—Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory   § 429.176 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.2.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.30 Applicability; description of the veneer subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which manufactures veneer and does not store or hold raw materials in wet storage conditions.
40:40:32.0.1.1.5.2.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.31 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available (BPT): (a) The following limitations constitute the maximum permissible discharge for all veneer manufacturing installations other than those referred to in paragraphs (b) and (c) of this section: There shall be no discharge of process wastewater pollutants into navigable waters. (b) The following limitations constitute the maximum permissible discharge for softwood veneer manufacturing processes which use direct steaming for the conditioning of logs: Subpart B 1 Within the range 6.0 to 9.0 at all times. (c) The following limitations constitute the maximum permissible discharge for hardwood veneer manufacturing processes which use direct steaming for the conditioning of logs: Subpart B 1 Within the range 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.2.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.2.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.33 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.2.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.34 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.2.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.35 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.2.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY B Subpart B—Veneer Subcategory   § 429.36 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.3.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.40 Applicability; description of the plywood subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plywood producing plant that does not store or hold raw materials in wet storage conditions.
40:40:32.0.1.1.5.3.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.41 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.3.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.42 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.3.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.43 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.3.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.44 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.3.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.45 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.3.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY C Subpart C—Plywood Subcategory   § 429.46 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.4.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.50 Applicability; description of the dry process hardboard subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant that produces hardboard using the dry matting process for forming the board mat.
40:40:32.0.1.1.5.4.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.51 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.4.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.52 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.4.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.4.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.54 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.4.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.55 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.4.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY D Subpart D—Dry Process Hardboard Subcategory   § 429.56 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.5.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.60 Applicability; description of the wet process hardboard subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which produces hardboard products using the wet matting process for forming the board mat.
40:40:32.0.1.1.5.5.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.61 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA     [46 FR 8285, Jan. 26, 1981, as amended at 46 FR 11972, Feb. 12, 1981] Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations apply to plants which produce smooth-one-side (S1S) hardboard: Subpart E (S1S) 1 Within the range 6.0 to 9.0 at all times. (b) The following limitations apply to plants which produce smooth-two-sides (S2S) hardboard: Subpart E (S2S) 1 Within the range 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.5.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.62 [Reserved] EPA        
40:40:32.0.1.1.5.5.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.63 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved] EPA        
40:40:32.0.1.1.5.5.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.64 New source performance standards (NSPS). EPA     [46 FR 8285, Jan. 26, 1981, as amended at 46 FR 57287, Nov. 23, 1981] For purpose of this new source performance standard only, “new source” means a source which is constructed at a site at which no other source covered by this part is located. Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.5.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.65 Pretreatment standards for existing sources (PSES). EPA       Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.5.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY E Subpart E—Wet Process Hardboard Subcategory   § 429.66 Pretreatment standards for new sources (PSNS). EPA       Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
40:40:32.0.1.1.5.6.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.70 Applicability; description of the wood preserving-water borne or nonpressure subcategory. EPA       This subpart applies to discharges and to the introduction of process wastewater pollutants into publicly owned treatment works from all nonpressure wood preserving treatment processes and all pressure wood preserving treatment processes employing water borne inorganic salts.
40:40:32.0.1.1.5.6.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.71 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.6.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.72 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.6.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.73 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.6.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.74 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.6.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.75 Pretreatment standards for existing sources (PSES). EPA       Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES): There shall be no introduction of process wastewater pollutants into publicly owned treatment works.
40:40:32.0.1.1.5.6.3.7 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY F Subpart F—Wood Preserving—Water Borne or Nonpressure Subcategory   § 429.76 Pretreatment standards for new sources (PSNS). EPA       Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS): There shall be no introduction of process wastewater pollutants into publicly owned treatment works.
40:40:32.0.1.1.5.7.3.1 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.80 Applicability; description of the wood preserving—steam subcategory. EPA       This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from wood preserving processes that use direct steam impingment on wood as the predominant conditioning method; processes that use the vapor drying process as the predominant conditioning method; direct steam conditioning processes which use the same retort to treat with both salt and oil type preservatives; and steam conditioning processes which apply both salt type and oil type preservatives to the same stock.
40:40:32.0.1.1.5.7.3.2 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.81 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). EPA       Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): Subpart G 1 Within the range of 6.0 to 9.0 at all times.
40:40:32.0.1.1.5.7.3.3 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.82 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved] EPA        
40:40:32.0.1.1.5.7.3.4 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.83 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved] EPA        
40:40:32.0.1.1.5.7.3.5 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.84 New source performance standards (NSPS). EPA       Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
40:40:32.0.1.1.5.7.3.6 40 Protection of Environment I N 429 PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY G Subpart G—Wood Preserving Steam Subcategory   § 429.85 Pretreatment standards for existing sources (PSES). EPA       Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and meet the following pretreatment standards for existing sources (PSES): Subpart G [PSES Effluent Limitations] In cases where POTWs find it necessary to impose mass limitations, the following equivalent mass limitations are provided as guidance. [Grams per cubic meter of production]

Next page

Advanced export

JSON shape: default, array, newline-delimited, object

CSV options: 

CREATE TABLE cfr_sections (
    section_id TEXT PRIMARY KEY,
    title_number INTEGER,
    title_name TEXT,
    chapter TEXT,
    subchapter TEXT,
    part_number TEXT,
    part_name TEXT,
    subpart TEXT,
    subpart_name TEXT,
    section_number TEXT,
    section_heading TEXT,
    agency TEXT,
    authority TEXT,
    source_citation TEXT,
    amendment_citations TEXT,
    full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);