cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
4 rows where part_number = 241 and title_number = 40 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40:40:27.0.1.4.31.1.17.1 | 40 | Protection of Environment | I | I | 241 | PART 241—SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS | A | Subpart A—General | § 241.1 Purpose. | EPA | This part identifies the requirements and procedures for the identification of solid wastes used as fuels or ingredients in combustion units under section 1004 of the Resource Conservation and Recovery Act and section 129 of the Clean Air Act. | ||||
| 40:40:27.0.1.4.31.1.17.2 | 40 | Protection of Environment | I | I | 241 | PART 241—SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS | A | Subpart A—General | § 241.2 Definitions. | EPA | [76 FR 15549, Mar. 21, 2011, as amended at 78 FR 9211, Feb. 7, 2013; 81 FR 6742, Feb. 8, 2016; 83 FR 5340, Feb. 7, 2018; 88 FR 71775, Oct. 18, 2023] | For the purposes of this subpart: Clean cellulosic biomass means those residuals that are akin to traditional cellulosic biomass, including, but not limited to: Agricultural and forest-derived biomass (e.g., green wood, forest thinnings, clean and unadulterated bark, sawdust, trim, tree harvesting residuals from logging and sawmill materials, hogged fuel, wood pellets, untreated wood pallets); urban wood (e.g., tree trimmings, stumps, and related forest-derived biomass from urban settings); corn stover and other biomass crops used specifically for the production of cellulosic biofuels (e.g., energy cane, other fast growing grasses, byproducts of ethanol natural fermentation processes); bagasse and other crop residues (e.g., peanut shells, vines, orchard trees, hulls, seeds, spent grains, cotton byproducts, corn and peanut production residues, rice milling and grain elevator operation residues); wood collected from forest fire clearance activities, trees and clean wood found in disaster debris, clean biomass from land clearing operations, and clean construction and demolition wood. These fuels are not secondary materials or solid wastes unless discarded. Clean biomass is biomass that does not contain contaminants at concentrations not normally associated with virgin biomass materials. Construction and demolition (C&D) wood means wood that is generated from the processing of debris from construction and demolition activities for the purposes of recovering wood. C&D wood from construction activities results from wood generated during any installation activity or from purchasing more wood than a project ultimately requires. C&D wood from demolition activities results from dismantling buildings and other structures, removing materials during renovation, or from natural disasters. Contaminants means all pollutants listed in Clean Air Act sections 112(b) or 129(a)(4), with the following three modifications: (1) The definition includes the elements chlorine, fluorine, nitrogen, and sulfur in cases where non-hazard… | |||
| 40:40:27.0.1.4.31.2.17.1 | 40 | Protection of Environment | I | I | 241 | PART 241—SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS | B | Subpart B—Identification of Non-Hazardous Secondary Materials That Are Solid Wastes When Used as Fuels or Ingredients in Combustion Units | § 241.3 Standards and procedures for identification of non-hazardous secondary materials that are solid wastes when used as fuels or ingredients in combustion units. | EPA | [76 FR 15549, Mar. 21, 2011, as amended at 78 FR 9212, Feb. 7, 2013; 80 FR 77578, Dec. 15, 2015; 81 FR 6742, Feb. 8, 2016] | (a) Except as provided in paragraph (b) of this section or in § 241.4(a) of this subpart, non-hazardous secondary materials that are combusted are solid wastes, unless a petition is submitted to, and a determination granted by, the EPA pursuant to paragraph (c) of this section. The criteria to be addressed in the petition, as well as the process for making the non-waste determination, are specified in paragraph (c) of this section. (b) The following non-hazardous secondary materials are not solid wastes when combusted: (1) Non-hazardous secondary materials used as a fuel in a combustion unit that remain within the control of the generator and that meet the legitimacy criteria specified in paragraph (d)(1) of this section. (2) The following non-hazardous secondary materials that have not been discarded and meet the legitimacy criteria specified in paragraph (d)(1) of this section when used in a combustion unit (by the generator or outside the control of the generator): (i) [Reserved] (ii) [Reserved] (3) Non-hazardous secondary materials used as an ingredient in a combustion unit that meet the legitimacy criteria specified in paragraph (d)(2) of this section. (4) Fuel or ingredient products that are used in a combustion unit, and are produced from the processing of discarded non-hazardous secondary materials and that meet the legitimacy criteria specified in paragraph (d)(1) of this section, with respect to fuels, and paragraph (d)(2) of this section, with respect to ingredients. The legitimacy criteria apply after the non-hazardous secondary material is processed to produce a fuel or ingredient product. Until the discarded non-hazardous secondary material is processed to produce a non-waste fuel or ingredient, the discarded non-hazardous secondary material is considered a solid waste and would be subject to all appropriate federal, state, and local requirements. (c) The Regional Administrator may grant a non-waste determination that a non-hazardous secondary material that is used as a fuel, which is not ma… | |||
| 40:40:27.0.1.4.31.2.17.2 | 40 | Protection of Environment | I | I | 241 | PART 241—SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS | B | Subpart B—Identification of Non-Hazardous Secondary Materials That Are Solid Wastes When Used as Fuels or Ingredients in Combustion Units | § 241.4 Non-Waste Determinations for Specific Non-Hazardous Secondary Materials When Used as a Fuel. | EPA | [78 FR 9213, Feb. 7, 2013, as amended by 81 FR 6743, Feb. 8, 2016; 83 FR 5340, Feb. 7, 2018] | (a) The following non-hazardous secondary materials are not solid wastes when used as a fuel in a combustion unit: (1) Scrap tires that are not discarded and are managed under the oversight of established tire collection programs, including tires removed from vehicles and off-specification tires. (2) Resinated wood. (3) Coal refuse that has been recovered from legacy piles and processed in the same manner as currently-generated coal refuse. (4) Dewatered pulp and paper sludges that are not discarded and are generated and burned on-site by pulp and paper mills that burn a significant portion of such materials where such dewatered residuals are managed in a manner that preserves the meaningful heating value of the materials. (5) Construction and demolition (C&D) wood processed from C&D debris according to best management practices. Combustors of C&D wood must obtain a written certification from C&D processing facilities that the C&D wood has been processed by trained operators in accordance with best management practices. Best management practices for purposes of this categorical listing must include sorting by trained operators that excludes or removes the following materials from the final product fuel: non-wood materials (e.g., polyvinyl chloride and other plastics, drywall, concrete, aggregates, dirt, and asbestos), and wood treated with creosote, pentachlorophenol, chromated copper arsenate, or other copper, chromium, or arsenical preservatives. In addition: (i) Positive sorting. C&D processing facilities that use positive sorting—where operators pick out desirable wood from co-mingled debris—or that receive and process positive sorted C&D wood must either: (A) Exclude all painted wood (to the extent that only de minimis quantities inherent to processing limitations may remain) from the final product fuel, (B) Use X-ray Fluorescence to ensure that painted wood included in the final product fuel does not contain lead-based paint, or (C) Require documentation that a building has been tested for and do… |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);