cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
36 rows where part_number = 220 and title_number = 49 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name, amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 49:49:4.1.1.1.15.1.11.1 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.1 Scope. | FRA | [75 FR 59601, Sept. 27, 2010] | This part prescribes minimum requirements governing the use of wireless communications in connection with railroad operations. In addition, this part sets forth prohibitions, restrictions, and requirements that apply to the use of personal and railroad-supplied cellular telephones and other electronic devices. So long as these minimum requirements are met, railroads may adopt additional or more stringent requirements. | ||||
| 49:49:4.1.1.1.15.1.11.2 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.2 [Reserved] | FRA | ||||||
| 49:49:4.1.1.1.15.1.11.3 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.3 Application. | FRA | (a) Except as provided in paragraph (b) of this section, this part applies to railroads that operate trains or other rolling equipment on standard gage track which is part of the general railroad system of transportation. (b) This part does not apply to: (1) A railroad that operates only on track inside an installation which is not part of the general railroad system of transportation; or (2) Rapid transit operations in an urban area that are not connected with the general railroad system of transportation. | |||||
| 49:49:4.1.1.1.15.1.11.4 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.5 Definitions. | FRA | [63 FR 47195, Sept. 4, 1998, as amended at 65 FR 41305, July 3, 2000; 75 FR 59601, Sept. 27, 2010] | As used in this part, the term: Adjacent tracks means two or more tracks with track centers spaced less than 25 feet apart. Associate Administrator for Railroad Safety/Chief Safety Officer means either the Associate Administrator for Railroad Safety/Chief Safety Officer, Federal Railroad Administration, 1200 New Jersey Ave., SE., Washington, DC 20590 or that person's delegate. Authorized business purpose means a purpose directly related to the tasks that a crewmember is expected to perform during the current tour of duty as specified by the railroad in writing. Control center means the locations on a railroad from which the railroad issues instructions governing railroad operations. Division headquarters means the location designated by the railroad where a high-level operating manager (e.g., a superintendent, division manager, or equivalent), who has jurisdiction over a portion of the railroad, has an office. Earpiece means a small speaker that is inserted in, or held next to, the ear for use in transmitting sounds related to an electronic device. Electronic device means an electronic or electrical device used to conduct oral, written, or visual communication; place or receive a telephone call; send or read an electronic mail message or text message; look at pictures; read a book or other written material; play a game; navigate the Internet; navigate the physical world; play, view, or listen to a video; play, view, or listen to a television broadcast; play or listen to a radio broadcast other than a radio broadcast by a railroad; play or listen to music; execute a computational function; or, perform any other function that is not necessary for the health or safety of the person and that entails the risk of distracting the employee or another railroad operating employee from a safety-related task. This term does not include— (1) Electronic control systems and information displays within the locomotive cab (whether the displays or systems be fixed or portable) or on a remote control transmitter nece… | ||||
| 49:49:4.1.1.1.15.1.11.5 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.7 Penalty. | FRA | [90 FR 28148, July 1, 2025] | (a) Any person (including but not limited to a railroad; any manager, supervisor, official, or other employee or agent of a railroad; any owner, manufacturer, lessor, or lessee of railroad equipment, track, or facilities; any independent contractor providing goods or services to a railroad; and any employee of such owner, manufacturer, lessor, lessee, or independent contractor) who violates any requirement of this part or causes the violation of any such requirement is subject to a civil penalty of at least the minimum civil monetary penalty and not more than the ordinary maximum civil monetary penalty per violation. However, penalties may be assessed against individuals only for willful violations, and a penalty not to exceed the aggravated maximum civil monetary penalty per violation may be assessed, where: (1) A grossly negligent violation, or a pattern of repeated violations, has created an imminent hazard of death or injury to persons; or (2) A death or injury has occurred. (b) The standard of liability for a railroad will vary depending upon the requirement involved. See 49 CFR part 209, appendix A. Each day a violation continues shall constitute a separate offense. See FRA's website at https://railroads.dot.gov/ for a statement of agency civil penalty policy. | ||||
| 49:49:4.1.1.1.15.1.11.6 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.8 Waivers. | FRA | (a) Any person subject to a requirement of this part may petition the Administrator for a waiver of compliance with such requirement. The filing of such a petition does not affect that person's responsibility for compliance with that requirement while the petition is being considered. (b) Each petition for waiver must be filed in the manner and contain the information required by part 211 of this chapter. (c) If the Administrator finds that a waiver of compliance is in the public interest and is consistent with railroad safety, the Administrator may grant the waiver subject to any conditions the Administrator deems necessary. | |||||
| 49:49:4.1.1.1.15.1.11.7 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.9 Requirements for trains. | FRA | (a) Except as provided for in paragraphs (b)(1) through (4) of this section, on and after July 1, 1999, each occupied controlling locomotive in a train shall have a working radio, and each train shall also have communications redundancy. For purposes of this section, “communications redundancy” means a working radio on another locomotive in the consist or other means of working wireless communications. (b) On and after July 1, 2000, the following requirements apply to a railroad that has fewer than 400,000 annual employee work hours: (1) Any train that transports passengers shall be equipped with a working radio in the occupied controlling locomotive and with redundant working wireless communications capability in the same manner as provided in paragraph (a) of this section. (2) Any train that operates at greater than 25 miles per hour; or engages in joint operations on track where the maximum authorized speed for freight trains exceeds 25 miles per hour; or engages in joint operations on a track that is adjacent to and within 30 feet measured between track center lines of another track on which the maximum authorized speed for passenger trains exceeds 40 miles per hour, shall be equipped with a working radio in the occupied controlling locomotive. (3) Any train that engages in joint operations, where the maximum authorized speed of the track is 25 miles per hour or less, shall be equipped with working wireless communications in the occupied controlling locomotive. (4) Any train not described in paragraph (b) of this section that transports hazardous material required to be placarded under the provisions of part 172 of this title shall be equipped with working wireless communications in the occupied controlling locomotive. | |||||
| 49:49:4.1.1.1.15.1.11.8 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.11 Requirements for roadway workers. | FRA | (a) On and after July 1, 1999, the following requirements apply to a railroad that has 400,000 or more annual employee work hours: (1) Maintenance-of-way equipment operating without locomotive assistance between work locations shall have a working radio on at least one such unit in each multiple piece of maintenance-of-way equipment traveling together under the same movement authority. The operators of each additional piece of maintenance-of-way equipment shall have communications capability with each other. (2) Each maintenance-of-way work group shall have intra-group communications capability upon arriving at a work site. (b) On and after July 1, 1999, each employee designated by the employer to provide on-track safety for a roadway work group or groups, and each lone worker, shall be provided, and where practicable, shall maintain immediate access to a working radio. When immediate access to a working radio is not available, the employee responsible for on-track safety or lone worker shall be equipped with a radio capable of monitoring transmissions from train movements in the vicinity. A railroad with fewer than 400,000 annual employee work hours may provide immediate access to working wireless communications as an alternative to a working radio. (c) This section does not apply to: (1) Railroads which have fewer than 400,000 annual employee work hours, and which do not operate trains in excess of 25 miles per hour; or (2) Railroad operations where the work location of the roadway work group or lone worker: (i) Is physically inaccessible to trains; or (ii) Has no through traffic or traffic on adjacent tracks during the period when roadway workers will be present. | |||||
| 49:49:4.1.1.1.15.1.11.9 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | A | Subpart A—General | § 220.13 Reporting emergencies. | FRA | (a) Employees shall immediately report by the quickest means available derailments, collisions, storms, wash-outs, fires, obstructions to tracks, and other hazardous conditions which could result in death or injury, damage to property or serious disruption of railroad operations. (b) In reporting emergencies, employees shall follow: (1) The procedures of § 220.47 when using a radio; or (2) The procedures specified for reporting emergencies in the railroad's timetables or timetable special instructions, when using another means of wireless communications. (c) Employees shall describe as completely as possible the nature, degree and location of the hazard. (d) An alternative means of communications capability shall be provided whenever the control center is unattended or unable to receive radio transmissions during a period in which railroad operations are conducted. | |||||
| 49:49:4.1.1.1.15.2.11.1 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.21 Railroad operating rules; radio communications; recordkeeping. | FRA | (a) The operating rules of each railroad with respect to radio communications shall conform to the requirements of this part. (b) Thirty days before commencing to use radio communications in connection with railroad operations each railroad shall retain one copy of its current operating rules with respect to radio communications at the locations prescribed in paragraphs (b) (1) and (b)(2) of this section. Each amendment to these operating rules shall be filed at such locations within 30 days after it is issued. These records shall be made available to representatives of the Federal Railroad Administration for inspection and photocopying during normal business hours. (1) Each Class I railroad, each Class II railroad, each railroad providing intercity rail passenger service, and each railroad providing commuter service in a metropolitan or suburban area shall retain such rules at each of its division headquarters and at its system headquarters; and (2) Each Class III railroad and any other railroad subject to this part but not subject to paragraph (b)(1) of this section shall retain such rules at the system headquarters of the railroad. (c) For purposes of this section, the terms Class I railroad, Class II railroad, and Class III railroad have the meaning given these terms in 49 CFR Part 1201. | |||||
| 49:49:4.1.1.1.15.2.11.10 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.38 Communication equipment failure. | FRA | (a) Any radio or wireless communication device found not to be functioning as intended when tested pursuant to § 220.37 shall be removed from service and the dispatcher or other employee designated by the railroad shall be so notified as soon as practicable. (b) If a radio or wireless communication device fails on the controlling locomotive en route, the train may continue until the earlier of— (1) The next calendar day inspection, or (2) The nearest forward point where the radio or wireless communication device can be repaired or replaced. | |||||
| 49:49:4.1.1.1.15.2.11.11 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.39 Continuous radio monitoring. | FRA | Each radio used in a railroad operation shall be turned on to the appropriate channel as designated in § 220.23 and adjusted to receive communications. | |||||
| 49:49:4.1.1.1.15.2.11.12 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.41 [Reserved] | FRA | ||||||
| 49:49:4.1.1.1.15.2.11.13 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.43 Radio communications consistent with federal regulations and railroad operating rules. | FRA | Radio communication shall not be used in connection with a railroad operation in a manner which conflicts with the requirements of this part, Federal Communication Commission regulations, or the railroad's operating rules. The use of citizen band radios for railroad operating purposes is prohibited. | |||||
| 49:49:4.1.1.1.15.2.11.14 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.45 Radio communication shall be complete. | FRA | Any radio communication which is not fully understood or completed in accordance with the requirements of this part and the operating rules of the railroad, shall not be acted upon and shall be treated as though not sent. | |||||
| 49:49:4.1.1.1.15.2.11.15 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.47 Emergency radio transmissions. | FRA | An initial emergency radio transmission shall be preceded by the word “emergency,” repeated three times. An emergency transmission shall have priority over all other transmissions and the frequency or channel shall be kept clear of non-emergency traffic for the duration of the emergency communication. | |||||
| 49:49:4.1.1.1.15.2.11.16 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.49 Radio communication used in shoving, backing or pushing movements. | FRA | When radio communication is used in connection with the shoving, backing or pushing of a train, locomotive, car, or on-track equipment, the employee directing the movement shall specify the distance of the movement, and the movement shall stop in one-half the remaining distance unless additional instructions are received. If the instructions are not understood, the movement shall be stopped immediately and may not be resumed until the misunderstanding has been resolved, radio contact has been restored, or communication has been achieved by hand signals or other procedures in accordance with the operating rules of the railroad. | |||||
| 49:49:4.1.1.1.15.2.11.17 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.51 Radio communications and signal indications. | FRA | (a) No information may be given by radio to a train or engine crew about the position or aspect displayed by a fixed signal. However, a radio may be used by a train crew member to communicate information about the position or aspect displayed by a fixed signal to other members of the same crew. (b) Except as provided in the railroad's operating rules, radio communication shall not be used to convey instructions which would have the effect of overriding the indication of a fixed signal. | |||||
| 49:49:4.1.1.1.15.2.11.18 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.61 Radio transmission of mandatory directives. | FRA | (a) Each mandatory directive may be transmitted by radio only when authorized by the railroad's operating rules. The directive shall be transmitted in accordance with the railroad's operating rules and the requirements of this part. (b) The procedure for transmission of a mandatory directive is as follows: (1) The train dispatcher or operator shall call the addressees of the mandatory directive and state the intention to transmit the mandatory directive. (2) Before the mandatory directive is transmitted, the employee to receive and copy shall state the employee's name, identification, location, and readiness to receive and copy. An employee operating the controls of moving equipment shall not receive and copy mandatory directives. A mandatory directive shall not be transmitted to employees on moving equipment, if such directive cannot be received and copied without impairing safe operation of the equipment. (3) A mandatory directive shall be copied in writing by the receiving employee in the format prescribed in the railroad's operating rules. (4) After the mandatory directive has been received and copied, it shall be immediately repeated in its entirety. After verifying the accuracy of the repeated mandatory directive, the train dispatcher or operator shall then state the time and name of the employee designated by the railroad who is authorized to issue mandatory directives. An employee copying a mandatory directive shall then acknowledge by repeating the time and name of the employee so designated by the railroad. (5)(i) For train crews, before a mandatory directive is acted upon, the conductor and engineer shall each have a written copy of the mandatory directive and make certain that the mandatory directive is read and understood by all members of the crew who are responsible for the operation of the train. Mandatory directives which have been fulfilled or canceled shall be marked with an “X” or in accordance with the railroad's operating rules, and retained for the duration of the train crew's work as… | |||||
| 49:49:4.1.1.1.15.2.11.2 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.23 Publication of radio information. | FRA | Each railroad shall designate where radio base stations are installed, where wayside stations may be contacted, and the appropriate radio channels used by these stations in connection with railroad operations by publishing them in a timetable or special instruction. The publication shall indicate the periods during which base and wayside radio stations are operational. | |||||
| 49:49:4.1.1.1.15.2.11.3 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.25 Instruction and operational testing of employees. | FRA | Each employee who a railroad authorizes to use a radio in connection with a railroad operation, shall be: (a) Provided with a copy of the railroad's operating rules governing the use of radio communication in a railroad operation; (b) Instructed in the proper use of radio communication as part of the program of instruction prescribed in § 217.11 of this chapter; and (c) Periodically tested under the operational testing requirements in § 217.9 of this chapter. | |||||
| 49:49:4.1.1.1.15.2.11.4 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.27 Identification. | FRA | (a) Except as provided in paragraph (c) of this section, the identification of each wayside, base or yard station shall include at least the following minimum elements, stated in the order listed: (1) Name of railroad. An abbreviated name or initial letters of the railroad may be used where the name or initials are in general usage and are understood in the railroad industry; and (2) Name and location of office or other unique designation. (b) Except as provided in paragraph (c) of this section, the identification of each mobile station shall consist of the following elements, stated in the order listed: (1) Name of railroad. An abbreviated name or initial letters of the railroad may be used where the name or initial letters are in general usage and are understood in the railroad industry; (2) Train name (number), if one has been assigned, or other appropriate unit designation; and (3) When necessary, the word “locomotive”, “motorcar”, or other unique identifier which indicates to the listener the precise mobile transmitting station. (c) If positive identification is achieved in connection with switching, classification, and similar operations wholly within a yard, fixed and mobile units may use short identification after the initial transmission and acknowledgment consistent with applicable Federal Communications Commission regulations governing “Station Identification”. | |||||
| 49:49:4.1.1.1.15.2.11.5 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.29 Statement of letters and numbers in radio communications. | FRA | (a) If necessary for clarity, a phonetic alphabet shall be used to pronounce any letter used as an initial, except initial letters of railroads. See appendix A of this part for the recommended phonetic alphabet. (b) A word which needs to be spelled for clarity, such as a station name, shall first be pronounced, and then spelled. If necessary, the word shall be spelled again, using a phonetic alphabet. (c) Numbers shall be spoken by digit, except that exact multiples of hundreds and thousands may be stated as such. A decimal point shall be indicated by the words “decimal,” “dot,” or “point.” (See appendix B to this part, for a recommended guide to the pronunciation of numbers.) | |||||
| 49:49:4.1.1.1.15.2.11.6 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.31 Initiating a radio transmission. | FRA | (a) Listen to ensure that the channel on which the employee intends to transmit is not already in use; (b) Identify the employee's station in accordance with the requirements of § 220.27; and (c) Verify that the employee has made radio contact with the person or station with whom the employee intends to communicate by listening for an acknowledgment. If the station acknowledging the employee's transmission fails to identify itself properly, the employee shall require a proper identification before proceeding with the transmission. | |||||
| 49:49:4.1.1.1.15.2.11.7 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.33 Receiving a radio transmission. | FRA | (a) Upon receiving a radio call, an employee shall promptly acknowledge the call, identifying the employee's station in accordance with the requirements of § 220.27 and stand by to receive. An employee need not attend the radio during the time that this would interfere with other immediate duties relating to the safety of railroad operations. (b) An employee who receives a transmission shall repeat it to the transmitting party unless the communication: (1) Relates to yard switching operations; (2) Is a recorded message from an automatic alarm device; or (3) Is general in nature and does not contain any information, instruction or advice which could affect the safety of a railroad operation. | |||||
| 49:49:4.1.1.1.15.2.11.8 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.35 Ending a radio transmission. | FRA | (a) Except for transmissions relating to yard switching operations, at the close of each transmission to which a response is expected, the transmitting employee shall say “over” to indicate to the receiving employee that the transmission is ended. (b) Except for transmissions relating to yard switching operations, at the close of each transmission to which no response is expected, the transmitting employee shall state the employee's identification followed by the word “out” to indicate to the receiving employee that the exchange of transmissions is complete. | |||||
| 49:49:4.1.1.1.15.2.11.9 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | B | Subpart B—Radio and Wireless Communication Procedures | § 220.37 Testing radio and wireless communication equipment. | FRA | (a) Each radio, and all primary and redundant wireless communication equipment used under §§ 220.9 and 220.11, shall be tested as soon as practicable to ensure that the equipment functions as intended prior to the commencement of the work assignment. (b) The test of a radio shall consist of an exchange of voice transmissions with another radio. The employee receiving the transmission shall advise the employee conducting the test of the clarity of the transmission. | |||||
| 49:49:4.1.1.1.15.3.11.1 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.301 Purpose and application. | FRA | (a) The purpose of this subpart is to reduce safety risks resulting from railroad operating employees being distracted by the inappropriate use of electronic devices, such as mobile telephones (cell phones or cellular phones) and laptop computers. (b) The applicability of this subpart is governed by § 220.3; this subpart, however, does not affect the use of working wireless communications pursuant to subparts A and B of this part. (c) The restrictions of this subpart C do not apply— (1) To the working radio; or (2) When a working radio failure occurs and an electronic device is used in accordance with railroad rules. | |||||
| 49:49:4.1.1.1.15.3.11.2 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.302 Operating rules implementing the requirements of this subpart. | FRA | Each railroad shall adopt operating rules that implement the requirements of this subpart. | |||||
| 49:49:4.1.1.1.15.3.11.3 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.303 General use of electronic devices. | FRA | A railroad operating employee shall not use an electronic device if that use would interfere with the employee's or another railroad operating employee's performance of safety-related duties. No individual in the cab of a controlling locomotive shall use an electronic device if that use would interfere with a railroad operating employee's performance of safety-related duties. | |||||
| 49:49:4.1.1.1.15.3.11.4 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.305 Use of personal electronic devices. | FRA | A railroad operating employee must have each personal electronic device turned off with any earpiece removed from the ear— (a) When on a moving train; (b) When any member of the crew is— (1) On the ground, or (2) Riding rolling equipment during a switching operation; or (c) When any railroad employee is assisting in preparation of the train for movement. | |||||
| 49:49:4.1.1.1.15.3.11.5 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.307 Use of railroad-supplied electronic devices. | FRA | (a) General restriction. A railroad operating employee may use a railroad-supplied electronic device only for an authorized business purpose as specified by the railroad in writing. An authorized business purpose involving the taking of a photograph or video must be approved by FRA. A railroad subject to this subpart must submit to FRA's Associate Administrator for Railroad Safety/Chief Safety Officer a document specifying in writing the authorized business purpose(s) involving the taking of a photograph or video for which a railroad-supplied electronic device may be used by the carrier's railroad operating employees. (b) Use by locomotive engineers operating controls. A locomotive engineer operating the controls of a train shall not use a railroad-supplied electronic device— (1) When on a moving train; (2) When any member of the crew is— (i) On the ground, or (ii) Riding rolling equipment during a switching operation; or (3) When any railroad employee is assisting in preparation of the train for movement. (c) Use in freight and passenger locomotive cabs generally. In addition to the restrictions on locomotive engineers described in paragraph (b) of this section, a railroad operating employee who is not in deadhead status shall not use a railroad-supplied electronic device in the cab of a controlling locomotive unless— (1) A safety briefing that includes all crewmembers is held; and (2) All crewmembers agree that it is safe to use the device. (d) Use outside freight locomotive cabs. A freight train crewmember who is not in deadhead status may use a railroad-supplied electronic device outside the cab of a controlling freight locomotive only if all of the following conditions are met: (1) The crewmember is not fouling a track; and (2) All crewmembers agree it is safe to use the device. | |||||
| 49:49:4.1.1.1.15.3.11.6 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.309 Permitted uses; exceptions to other restrictions. | FRA | Notwithstanding any other limitations in this subpart, a railroad operating employee may use the following, if that use does not interfere with any employee's performance of safety-related duties— (a) The digital storage and display function of an electronic device to refer to a railroad rule, special instruction, timetable, or other directive, if such use is authorized under a railroad operating rule or instruction. (b) An electronic device as necessary to respond to an emergency situation involving the operation of the railroad or encountered while performing a duty for the railroad. (c) An electronic device to take a photograph of a safety hazard or a violation of a rail safety law, regulation, order, or standard, provided that— (1) A camera that is part of a cell phone or other similar multi-functional electronic device is not included in this exception unless it is a railroad-supplied device and is used for an authorized business purpose; (2) The camera, unless otherwise permitted, is turned off immediately after the documentation has been made; and (3) If the camera is used in the cab of a moving train, the use is only by a crewmember other than the locomotive engineer. (d) A stand-alone calculator if used for an authorized business purpose. (e) A medical device that is consistent with the railroad's standards for medical fitness for duty. (f) A wireless communication device to conduct train or switching operations if the railroad operating employee is part of a crew assigned to a train that is exempt under § 220.9(b) from the requirement of a working radio when the employing railroad has fewer than 400,000 annual employee work hours. | |||||
| 49:49:4.1.1.1.15.3.11.7 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.311 Railroad operating employees in deadhead status. | FRA | (a) Notwithstanding any other restrictions in this subpart, a railroad operating employee who is in deadhead status and not inside the cab of a controlling locomotive may use an electronic device only if the employee is not using the device in such a way that interferes with any railroad operating employee's personal safety or performance of safety-related duties. (b) A railroad operating employee who is in deadhead status and located inside the cab of a controlling locomotive must have each electronic device turned off with any earpiece removed from the ear— (1) When on a moving train; (2) When any member of the crew is— (i) On the ground, or (ii) Riding rolling equipment during a switching operation; or (3) When any railroad employee is assisting in preparation of the train for movement. | |||||
| 49:49:4.1.1.1.15.3.11.8 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.313 Instruction. | FRA | (a) Program. Beginning December 27, 2010, each railroad shall maintain a written program of instruction and examination of each railroad operating employee and each supervisor of the railroad operating employee on the meaning and application of the railroad's operating rules implementing the requirements of this subpart if these requirements are pertinent to the employee's duties. If all requirements of this subpart are satisfied, a railroad may consolidate any portion of the instruction or examination required by this subpart with the program of instruction required under § 217.11 of this chapter. (1) The written program of instruction and examination shall address the requirements of this subpart, as well as consequences of noncompliance. (2) The written program of instruction and examination shall include, but is not limited to, an explanation of the following: (i) When a railroad operating employee must have personal electronic devices turned off with the earpiece removed from the ear as required by this subpart. (ii) If a railroad supplies an electronic device to its railroad operating employees, when a railroad operating employee may use such a device. The employee must be instructed on what constitutes an authorized business purpose. (iii) The potential penalties and other consequences of committing a violation of this subpart, both those imposed by the Federal Railroad Administration (FRA) and those imposed by the railroad, as well as any distinction between the requirements of this subpart and any more stringent requirements imposed by the railroad and the related distinction between the two sets of potential consequences. (b) Implementation schedule. Each employee performing duties subject to the requirements in this subpart shall be initially instructed prior to March 28, 2011. (1) Beginning March 28, 2011, no employee shall perform work requiring compliance with the operating rules implementing the requirements of this subpart unless the employee has been instructed on requirements of this … | |||||
| 49:49:4.1.1.1.15.3.11.9 | 49 | Transportation | II | 220 | PART 220—RAILROAD COMMUNICATIONS | C | Subpart C—Electronic Devices | § 220.315 Operational tests and inspections; further restrictions on use of electronic devices. | FRA | (a) The railroad's program of operational tests and inspections under part 217 of this chapter shall be revised as necessary to include this subpart and shall specifically include a minimum number of operational tests and inspections, subject to adjustment as appropriate. (b) When conducting a test or inspection under part 217 of this chapter, a railroad officer, manager, or supervisor is prohibited from calling the personal electronic device or the railroad-supplied electronic device used by a railroad operating employee while the railroad officer, manager, or supervisor knows or should have known that— (1) The train to which the employee is assigned is moving; (2) The employee is— (i) On the ground; (ii) Riding rolling equipment during switching operations; or (iii) Assisting in preparation of the train to which the employee is assigned for movement. |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);