cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
15 rows where part_number = 176 and title_number = 21 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 21:21:3.0.1.1.7.2.1.1 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.110 Acrylamide-acrylic acid resins. | FDA | Acrylamide-acrylic acid resins may be safely used as components of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section. (a) Acrylamide-acrylic acid resins are produced by the polymerization of acrylamide with partial hydrolysis or by the copolymerization of acrylamide and acrylic acid. (b) The acrylamide-acrylic acid resins contain less than 0.2 percent residual monomer. (c) The resins are used as adjuvants in the manufacture of paper and paperboard in amounts not to exceed that necessary to accomplish the technical effect and not to exceed 2 percent by weight of the paper or paperboard. | ||||
| 21:21:3.0.1.1.7.2.1.10 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.230 3,5-Dimethyl-1,3,5,2 | FDA | 3,5-Dimethyl-1,3,5,2 H- tetrahydrothi-adiazine-2-thione may safely be used as a preservative in the manufacture and coating of paper and paperboard intended for use in contact with food in accordance with the following prescribed conditions: (a) It is used as follows: (1) In the manufacture of paper and paperboard as a preservative for substances added to the pulp suspension prior to the sheet-forming operation provided that the preservative is volatilized by heat in the drying and finishing of the paper and paperboard. (2) As a preservative for coatings for paper and paperboard, Provided, That the preservative is volatilized by heat in the drying and finishing of the coated paper or paperboard. (b) The quantity used shall not exceed the least amount reasonably required to accomplish the intended technical effect and shall not be intended to nor, in fact, accomplish any physical or technical effect in the food itself. (c) The use of a preservative in any substance or article subject to any regulation in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter must comply with any specifications and limitations prescribed by such regulation for the substance or article. | ||||
| 21:21:3.0.1.1.7.2.1.11 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.250 Poly-1,4,7,10,13-pentaaza-15-hydroxyhexadecane. | FDA | Poly-1,4,7,10,13-pentaaza-15-hydrox-yhexadecane may be safely used as a retention aid employed prior to the sheet-forming operation in the manufacture of paper and paperboard intended for use in contact with food in an amount not to exceed that necessary to accomplish the intended physical or technical effect and not to exceed 6 pounds per ton of finished paper or paperboard. | ||||
| 21:21:3.0.1.1.7.2.1.12 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.260 Pulp from reclaimed fiber. | FDA | (a) Pulp from reclaimed fiber may be safely used as a component of articles used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of paragraph (b) of this section. (b) Pulp from reclaimed fiber is prepared from the paper and paperboard products described in paragraphs (b)(1) and (2) of this section, by repulping with water to recover the fiber with the least possible amount of nonfibrous substances. (1) Industrial waste from the manufacture of paper and paperboard products excluding that which bears or contains any poisonous or deleterious substance which is retained in the recovered pulp and that migrates to the food, except as provided in regulations promulgated under sections 406 and 409 of the Federal Food, Drug, and Cosmetic Act. (2) Salvage from used paper and paperboard excluding that which (i) bears or contains any poisonous or deleterious substance which is retained in the recovered pulp and that migrates to the food, except as provided in regulations promulgated under sections 406 and 409 of the act or (ii) has been used for shipping or handling any such substance. | ||||
| 21:21:3.0.1.1.7.2.1.13 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.300 Slimicides. | FDA | [42 FR 14554, Mar. 15, 1977, as amended at 42 FR 41854, Aug. 19, 1977; 44 FR 75627, Dec. 21, 1979; 46 FR 36129, July 14, 1981; 49 FR 5748, Feb. 15, 1984; 51 FR 19059, May 27, 1986; 51 FR 43734, Dec. 4, 1986; 54 FR 18103, Apr. 27, 1989; 55 FR 31825, Aug. 6, 1990; 64 FR 46130, Aug. 24, 1999; 64 FR 69900, Dec. 15, 1999; 65 FR 40497, June 30, 2000; 65 FR 70790, Nov. 28, 2000; 69 FR 24512, May 4, 2004; 87 FR 31089, May 20, 2022] | (a) Slimicides may be safely used in the manufacture of paper and paperboard that contact food, in accordance with the following prescribed conditions: (1) Slimicides are used as antimicrobial agents to control slime in the manufacture of paper and paperboard. (2) Subject to any prescribed limitations, slimicides are prepared from one or more of the slime-control substances named in paragraph (c) of this section to which may be added optional adjuvant substances as provided for under paragraph (d) of this section. (3) Slimicides are added to the process water used in the production of paper or paperboard, and the quantity added shall not exceed the amount necessary to accomplish the intended technical effect. (b) To insure safe usage, the label or labeling of slimicides shall bear adequate directions for use. (c) Slime-control substances permitted for use in the preparation of slimicides include substances subject to prior sanction or approval for such use and the following: (d) Adjuvant substances permitted to be used in the preparation of slimicides include substances generally recognized as safe for use in food, substances generally recognized as safe for use in paper and paperboard, substances permitted to be used in paper and paperboard by other regulations in this chapter, and the following: Acetone. Butlylene oxide. N,N- Dimethylformamide. Ethanolamine. Ethylene glycol. Ethylenediamine. N- methyl-2-pyrrolidone (CAS Reg. No. 872-50-4). a,a′- [Methylenebis[4-(1,1,3,3-tetramethylbutyl)- o- phenylene]] bis [ omega- hydroxypoly (oxyethylene)] having 6-7.5 moles of ethylene oxide per hydroxyl group. Monomethyl ethers of mono-, di-, and tripropylene glycol. Nonylphenol reaction product with 9 to 12 molecules of ethylene oxide. Octylphenol reaction product with 25 molecules of propylene oxide and 40 molecules of ethylene oxide. Acetone. Butlylene oxide. N,N- Dimethylformamide. Ethanolamine. Ethylene glycol. Ethylenediamine. N- methyl-2-pyrrolidone (CAS Reg. No. 872-50-4… | |||
| 21:21:3.0.1.1.7.2.1.14 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.320 Sodium nitrate-urea complex. | FDA | Sodium nitrate-urea complex may be safely used as a component of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section. (a) Sodium nitrate-urea complex is a clathrate of approximately two parts urea and one part sodium nitrate. (b) Sodium nitrate-urea complex conforming to the limitations prescribed in paragraph (b)(1) of this section is used as provided in paragraph (b)(2) of this section. (1) Limitations. (i) It is used as a plasticizer in glassine and greaseproof paper. (ii) The amount used does not exceed that required to accomplish its intended technical effect or exceed 15 percent by weight of the finished paper. (2) Conditions of use. The glassine and greaseproof papers are used for packaging dry food or as the food-contact surface for dry food. | ||||
| 21:21:3.0.1.1.7.2.1.15 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.350 Tamarind seed kernel powder. | FDA | Tamarind seed kernel powder may be safely used as a component of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section. (a) Tamarind seed kernel powder is the ground kernel of tamarind seed ( Tamarindus indica L.) after removal of the seed coat. (b) It is used in the manufacture of paper and paperboard. | ||||
| 21:21:3.0.1.1.7.2.1.2 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.120 Alkyl ketene dimers. | FDA | Alkyl ketene dimers may be safely used as a component of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl halides derived from the fatty acids of animal or vegetable fats and oils. (b) The alkyl ketene dimers are used as an adjuvant in the manufacture of paper and paperboard under such conditions that the alkyl ketene dimers and their hydrolysis products dialkyl ketones do not exceed 0.4 percent by weight of the paper or paperboard. (c) The alkyl ketene dimers may be used in the form of an aqueous emulsion which may contain sodium lignosulfonate as a dispersant. | ||||
| 21:21:3.0.1.1.7.2.1.3 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.130 Anti-offset substances. | FDA | Substances named in paragraphs (b) and (c) of this section may be safely used to prevent the transfer of inks employed in printing and decorating paper and paperboard used for food packaging in accordance with the provisions of this section: (a) The substances are applied to the nonfood contact, printed side of the paper or paperboard in an amount not greater than that required to accomplish the technical effect nor greater than any specific limitations, where such are provided. (b) Anti-offset powders are prepared from substances that are generally recognized as safe in food, substances for which prior sanctions or approvals were granted and which are used in accordance with the specific provisions of such sanction or approval, and substances named in paragraph (c) of this section. (c) The substances permitted are as follows: | ||||
| 21:21:3.0.1.1.7.2.1.4 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.150 Chelating agents used in the manufacture of paper and paperboard. | FDA | The substances named in paragraph (a) of this section may be safely used in the manufacture of paper and paperboard, in accordance with the conditions prescribed in paragraphs (b) and (c) of this section: (a) Chelating agents: (b) Any one or any combination of the substances named is used or intended for use as chelating agents. (c) The substances are added in an amount not greater than that required to accomplish the intended technical effect nor greater than any specific limitation, where such is provided. | ||||
| 21:21:3.0.1.1.7.2.1.5 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.160 Chromium (Cr III) complex of | FDA | The chromium (Cr III) complex of N- ethyl - N - heptadecylfluoro-octane sulfonyl glycine containing up to 20 percent by weight of the chromium (Cr III) complex of heptadecylfluoro-octane sulfonic acid may be safely used as a component of paper for packaging dry food when used in accordance with the following prescribed conditions. (a) The food additive is used as a component of paper in an amount not to exceed 0.5 percent by weight of the paper. (b)(1) The food-contact surface of the paper is overcoated with a polymeric or resinous coating at least 1/3 -mil in thickness, that meets the provision of § 176.170; or (2) The treated paper forms one or more plies of a paper in a multiwall bag and is separated from the food by at least one ply of packaging films or grease-resistant papers which serves as a functional barrier between the food additive and the food. Such packaging films or grease-resistant papers conform with appropriate food additive regulations. (c) The labeling of the food additive shall contain adequate directions for its use to insure compliance with the requirements of paragraphs (a) and (b) of this section. | ||||
| 21:21:3.0.1.1.7.2.1.6 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.170 Components of paper and paperboard in contact with aqueous and fatty foods. | FDA | [42 FR 14554, Mar. 15, 1977] | Substances identified in this section may be safely used as components of the uncoated or coated food-contact surface of paper and paperboard intended for use in producing, manufacturing, packaging, processing, preparing, treating, packing, transporting, or holding aqueous and fatty foods, subject to the provisions of this section. Components of paper and paperboard in contact with dry food of the type identified under Type VIII of table 1 in paragraph (c) of this section are subject to the provisions of § 176.180. (a) Substances identified in paragraph (a)(1) through (5) of this section may be used as components of the food-contact surface of paper and paperboard. Paper and paperboard products shall be exempted from compliance with the extractives limitations prescribed in paragraph (c) of this section: Provided, That the components of the food-contact surface consist entirely of one or more of the substances identified in this paragraph: And provided further, That if the paper or paperboard when extracted under the conditions prescribed in paragraph (c) of this section exceeds the limitations on extractives contained in paragraph (c) of this section, information shall be available from manufacturing records from which it is possible to determine that only substances identified in this paragraph (a) are present in the food-contact surface of such paper or paperboard. (1) Substances generally recognized as safe in food. (2) Substances generally recognized as safe for their intended use in paper and paperboard products used in food packaging. (3) Substances used in accordance with a prior sanction or approval. (4) Substances that by regulation in parts 170 through 189 of this chapter may be safely used without extractives limitations as components of the uncoated or coated food-contact surface of paper and paperboard in contact with aqueous or fatty food, subject to the provisions of such regulation. (5) Substances identified in this paragraph, as follows: (b) Substances identified in paragraphs (b)(1) … | |||
| 21:21:3.0.1.1.7.2.1.7 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.180 Components of paper and paperboard in contact with dry food. | FDA | [42 FR 14554, Mar. 15, 1977] | The substances listed in this section may be safely used as components of the uncoated or coated food-contact surface of paper and paperboard intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding dry food of the type identified in § 176.170(c), table 1, under Type VIII, subject to the provisions of this section. (a) The substances are used in amounts not to exceed that required to accomplish their intended physical or technical effect, and are so used as to accomplish no effect in food other than that ordinarily accomplished by packaging. (b) The substances permitted to be used include the following: (1) Substances that by § 176.170 and other applicable regulations in parts 170 through 189 of this chapter may be safely used as components of the uncoated or coated food-contact surface of paper and paperboard, subject to the provisions of such regulation. (2) Substances identified in the following list: | |||
| 21:21:3.0.1.1.7.2.1.8 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.200 Defoaming agents used in coatings. | FDA | [42 FR 14554, Mar. 15, 1977, as amended at 62 FR 39772, July 24, 1997] | The defoaming agents described in this section may be safely used as components of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section. (a) The defoaming agents are prepared as mixtures of substances described in paragraph (d) of this section. (b) The quantity of any substance employed in the formulation of defoaming agents does not exceed the amount reasonably required to accomplish the intended physical or technical effect in the defoaming agents or any limitation further provided. (c) Any substance employed in the production of defoaming agents and which is the subject of a regulation in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter conforms with any specification in such regulation. (d) Substances employed in the formulation of defoaming agents include: (1) Substances generally recognized as safe in food. (2) Substances subject to prior sanction or approval for use in defoaming agents and used in accordance with such sanction or approval. (3) Substances identified in this paragraph (d)(3) and subject to such limitations as are provided: (e) The defoaming agents are used as follows: (1) The quantity of defoaming agent or agents used shall not exceed the amount reasonably required to accomplish the intended effect, which is to prevent or control the formation of foam. (2) The defoaming agents are used in the preparation and application of coatings for paper and paperboard. | |||
| 21:21:3.0.1.1.7.2.1.9 | 21 | Food and Drugs | I | B | 176 | PART 176—INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS | B | Subpart B—Substances for Use Only as Components of Paper and Paperboard | § 176.210 Defoaming agents used in the manufacture of paper and paperboard. | FDA | [42 FR 14554, Mar. 15, 1977, as amended at 47 FR 17986, Apr. 27, 1982; 47 FR 46495, Oct. 19, 1982; 47 FR 56845, Dec. 21, 1982; 54 FR 24897, June 12, 1989; 57 FR 31313, July 15, 1992; 61 FR 14246, Apr. 1, 1996] | Defoaming agents may be safely used in the manufacture of paper and paperboard intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions: (a) The defoaming agents are prepared from one or more of the substances named in paragraph (d) of this section, subject to any prescribed limitations. (b) The defoaming agents are used to prevent or control the formation of foam during the manufacture of paper and paperboard prior to and during the sheet-forming process. (c) The quantity of defoaming agent or agents added during the manufacturing process shall not exceed the amount necessary to accomplish the intended technical effect. (d) Substances permitted to be used in the formulation of defoaming agents include substances subject to prior sanctions or approval for such use and employed subject to the conditions of such sanctions or approvals, substances generally recognized as safe for use in food, substances generally recognized as safe for use in paper and paperboard, and substances listed in this paragraph, subject to the limitations, if any, prescribed. (1) Fatty triglycerides, and the fatty acids, alcohols, and dimers derived therefrom: Beef tallow. Castor oil. Coconut oil. Corn oil. Cottonseed oil. Fish oil. Lard oil. Linseed oil. Mustardseed oil. Palm oil. Peanut oil. Rapeseed oil. Ricebran oil. Soybean oil. Sperm oil. Tall oil. Beef tallow. Castor oil. Coconut oil. Corn oil. Cottonseed oil. Fish oil. Lard oil. Linseed oil. Mustardseed oil. Palm oil. Peanut oil. Rapeseed oil. Ricebran oil. Soybean oil. Sperm oil. Tall oil. (2) Fatty triglycerides, and marine oils, and the fatty acids and alcohols derived therefrom (paragraph (d)(1) of this section) reacted with one or more of the following, with or without dehydration, to form chemicals of the category indicated in parentheses: Aluminum hydroxide (soaps). Ammonia (amides). Butanol (esters). Butoxy-polyoxypropylene, molecular weigh… |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);