cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
75 rows where part_number = 171 and title_number = 14 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name, amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 14:14:3.0.1.4.33.1.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.1 Scope. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966; Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | This subpart sets forth minimum requirements for the approval and operation on non-Federal VOR facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. | |||
| 14:14:3.0.1.4.33.1.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.3 Requests for IFR procedure. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | (a) Each person who requests an IFR procedure based on a VOR facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.7 and is installed in accordance with § 171.9. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and maintenance manual that meets the requirements of § 171.11. (4) A statement of intention to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this paragraph. (b) After the FAA inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the FAA. | |||
| 14:14:3.0.1.4.33.1.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.5 Minimum requirements for approval. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-6, 35 FR 10288, June 24, 1970] | (a) The following are the minimum requirements that must be met before the FAA will approve an IFR procedure for a non-Federal VOR: (1) The facility's performance, as determined by air and ground inspection, must meet the requirements of § 171.7. (2) The installation of the equipment must meet the requirements of § 171.9. (3) The owner must agree to operate and maintain the facility in accord- ance with § 171.11. (4) The owner must agree to furnish periodic reports, as set forth in § 171.13, and must agree to allow the FAA to inspect the facility and its operation whenever necessary. (5) The owner must assure the FAA that he will not withdraw the facility from service without the permission of the FAA. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the Federal Aviation Administration may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the FAA commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. | |||
| 14:14:3.0.1.4.33.1.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.7 Performance requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970; Amdt. 171-9, 38 FR 28557, Oct. 15, 1973] | (a) The VOR must perform in accordance with the “International Standards and Recommended Practices, Aeronautical Telecommunications,” Part I, paragraph 3.3 (Annex 10 to the Convention on International Civil Aviation), except that part of paragraph 3.3.2.1 specifying a radio frequency tolerance of 0.005 percent, and that part of paragraph 3.3.7 requiring removal of only the bearing information. In place thereof, the frequency tolerance of the radio frequency carrier must not exceed plus or minus 0.002 percent, and all radiation must be removed during the specified deviations from established conditions and during periods of monitor failure. (b) Ground inspection consists of an examination of the design features of the equipment to determine that there will not be conditions that will allow unsafe operations because of component failure or deterioration. (c) The monitor is checked periodi- cally, during the in-service test evaluation period, for calibration and stability The tests are made with a standard “Reference and variable phase signal generator” and associated test equipment, including an oscilloscope and portable field detector. In general, the ground check is conducted in accord- ance with section 8.4 of FAA Handbook AF P 6790.9 “Maintenance Instruction for VHF Omniranges”, adapted for the facility concerned. (d) Flight tests to determine the facility's adequacy for operational requirements and compliance with applicable “Standards and Recommended Practices” are conducted in accordance with the “U.S. Standard Flight Inspection Manual”, particularly section 201. (e) After January 1, 1975, the owner of the VOR shall modify the facility to perform in accordance with paragraph 3.3.5.7 of Annex 10 to the Convention on International Civil Aviation within 180 days after receipt of notice from the Administrator that 50 kHz channel spacing is to be implemented in the area and that a requirement exists for suppression of 9960 Hz subcarrier harmonics. | |||
| 14:14:3.0.1.4.33.1.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.9 Installation requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970; Amdt. 171-16, 56 FR 65664, Dec. 17, 1991] | (a) The facility must be installed according to accepted good engineering practices, applicable electric and safety codes, and the installation must meet at least the Federal Communication Commission's licensing requirements. (b) The facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated, with a supplemental standby system, if needed. (c) Dual transmitting equipment with automatic changeover is preferred and may be required to support certain IFR procedures. (d) There must be a means for determining, from the ground, the performance of the equipment, including the antenna, initially and periodically. (e) A facility intended for use as an instrument approach aid for an airport must have or be supplemented by (depending on circumstances) the following ground-air or landline communications services: (1) At facilities outside of and not immediately adjacent to controlled airspace, there must be ground-air communications from the airport served by the facility. Separate communications channels are acceptable. (2) At facilities within or immediately adjacent to controlled airspace, there must be the ground-air communications required by paragraph (e)(1) of this section and reliable communications (at least a landline telephone) from the airport to the nearest FAA air traffic control or communication facility. Paragraphs (e) (1) and (2) of this section are not mandatory at airports where an adjacent FAA facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure. In addition, at low traffic density airports within or immediately adjacent to controlled airspace and where extensive delays are not a factor, the requirements of paragraphs (e) (1) and (2) of this section may be reduced to reliable communications (at least a landline telephone) from the airport to the nearest FAA air traffic control or communication facility, if an adjacent FAA facility can communicate with aircraft… | |||
| 14:14:3.0.1.4.33.1.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.11 Maintenance and operations requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966] | (a) The owner of the facility must establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility must meet at least the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility including proficiency in maintenance procedures and the use of specialized test equipment. (b) The owner must prepare, and obtain FAA approval of, an operations and maintenance manual that sets forth mandatory procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons only. (3) FCC licensing requirements for operating and maintenance personnel. (4) Posting of licenses and signs. (5) Relations between the facility and FAA air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable), and instructions for the operation of an air traffic advisory service if the VOR is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and specific maintenance procedures and servicing guides stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.13. (10) Monitoring of the facility. (11) Inspections by United States personnel. (12) Names, addresses, and telephone numbers of persons to be notified in an emergency. (13) Shutdowns for routine maintenance and issue of “Notices to Airmen” for routine or emergency shutdowns (private use facilities may om… | |||
| 14:14:3.0.1.4.33.1.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | A | Subpart A—VOR Facilities | § 171.13 Reports. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-5, 34 FR 15245, Sept. 30, 1969; Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports on forms furnished by the FAA, at the times indicated, to the FAA Regional office for the area in which the facility is located: (a) Record of meter readings and adjustments ( Form FAA-198 ). To be filled out by the owner with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional office of the FAA. The owner shall revise the form after any major repair, modernization, or returning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log ( FAA Form 6003-1 ). This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional office of the FAA at the end of the month in which it is prepared. (c) Radio equipment operation record ( Form FAA-418 ). To contain a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional office of the FAA. (d) [Reserved] (e) VOR ground check error data ( Forms FAA-2396 and 2397 ). To contain results of the monthly course accuracy ground check in accordance with FAA Handbook AF P 6790.9 “Maintenance Instructions for VHF Omniranges”. The owner shall keep the originals in the facility and send a copy of each form to the appropriate Regional office of the FAA on a monthly basis. | |||
| 14:14:3.0.1.4.33.10.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.301 Scope. | FAA | This subpart sets forth minimum requirements for the approval, installation, operation and maintenance of non-Federal Microwave Landing System (MLS) facilities that provide the basis for instrument flight rules (IFR) and air traffic control procedures. | ||||
| 14:14:3.0.1.4.33.10.3.10 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.319 Approach elevation monitor system requirements. | FAA | (a) The monitor system must act to ensure that any of the following conditions do not persist for longer than the periods specified when: (1) There is a change in the ground component contribution to the mean glidepath error component such that the path following error on any glidepath exceeds the limits specified in § 171.317(d) for a period of more than one second. The above requirement and the requirement to limit the ground equipment mean error to ±0.067 degree can be satisfied by the following procedure. The integral monitor alarm limit should be set to ±0.067 degree. This will limit the electrical component of mean glidepath error to ±0.067 degree. The field monitor alarm limit should be set such that with the mean glidepath error at the alarm limit the total allowed PFE is not exceeded on any commissioned glidepath from the limit of coverage to an altitude of 100 feet. (2) There is a reduction in the radiated power to a level not less than that specified in § 171.317(a)(4) for a period of more than one second. (3) There is an error in the preamble DPSK transmission which occurs more than once in any one second period. (4) There is an error in the time division multiplex synchronization of a particular elevation function such that the requirement specified in § 171.311(e) is not satisfied and this condition persists for more than one second. (5) A failure of the monitor is detected. (b) The period during which erroneous guidance information is radiated must not exceed the periods specified in § 171.319(a). If the fault is not cleared within the time allowed, radiation shall cease. After shutdown, no attempt must be made to restore service until a period of 20 seconds has elapsed. | ||||
| 14:14:3.0.1.4.33.10.3.11 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.321 DME and marker beacon performance requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended at 69 FR 18803, Apr. 9, 2004] | (a) The DME equipment must meet the performance requirements prescribed in subpart G of the part. This subpart imposes requirements that performance features must comply with International Standards and Recommended Practices, Aeronautical Telecommunications, Vol. I of Annex 10 to ICAO. It is available from ICAO, Aviation Building, 1080 University Street, Montreal 101, Quebec, Canada, Attention: Distribution Officer and also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (b) MLS marker beacon equipment must meet the performance requirements prescribed in subpart H of this part. This subpart imposes requirements that performance features must comply with International Standards and Recommended Practices, Aeronautical Telecommuncations, Vol. I of Annex 10 to ICAO. | |||
| 14:14:3.0.1.4.33.10.3.12 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.323 Fabrication and installation requirements. | FAA | [Docket 20669, 51 FR 33177, Sept. 18, 1986, as amended by Amdt. 171-16, 56 FR 65665, Dec. 17, 1991] | (a) The MLS facility must be permanent and must be located, constructed, and installed in accordance with best commercial engineering practices, using applicable electric and safety codes and Federal Communications Commission (FCC) licensing requirements and siting requirements of §§ 171.313(b) and 171.317(b). (b) The MLS facility components must utilize solid state technology except that traveling wave tube amplifiers (TWTA) may be used. A maximum level of common modularity must be provided along with diagnostics to facilitate maintenance and troubleshooting. (c) An approved monitoring capability must be provided which indicates the status of the equipment at the site and at a remotely located maintenance area, with monitor capability that provides pre-alarm of impending system failures. This monitoring feature must be capable of transmitting the status and pre-alarm over standard phone lines to a remote section. In the event the sponsor requests the FAA to assume ownership of the facility, the monitoring feature must also be capable of interfacing with FAA remote monitoring requirements. This requirement may be complied with by the addition of optional software and/or hardware in space provided in the original equipment. (d) The mean corrective maintenance time of the MLS equipment must be equal to or less than 0.5 hours with a maximum corrective maintenance time not to exceed 1.5 hours. This measure applies to correction of unscheduled failures of the monitor, transmitter and associated antenna assemblies, limited to unscheduled outage and out of tolerance conditions. (e) The mean-time-between-failures of the MLS angle system must not be less than 1,500 hours. This measure applies to unscheduled outage, out-of-tolerance conditions, and failures of the monitor, transmitter, and associated antenna assemblies. (f) The MLS facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated. Adequate power capacity must be provided for the operation of t… | |||
| 14:14:3.0.1.4.33.10.3.13 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.325 Maintenance and operations requirements. | FAA | (a) The owner of the facility must establish an adequate maintenance system and provide MLS qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility must meet the FCC licensing requirements and demonstrate that he has the special knowledge and skills needed to maintain an MLS facility, including proficiency in maintenance procedures and the use of specialized test equipment. (b) In the event of out-of-tolerance conditions or malfunctions, as evidenced by receiving two successive pilot reports, the owner must close the facility by encasing radiation, and issue a “Notice to Airmen” (NOTAM) that the facility is out of service. (c) The owner must prepare, and obtain approval of, an operations and maintenance manual that sets forth mandatory procedures for operations, periodic maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons. (3) FCC licensing requirements for operations and maintenance personnel. (4) Posting of licenses and signs. (5) Relations between the facility and FAA air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information, if applicable, and instructions for the operation of an air traffic advisory service if the facility is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and specific maintenance procedures and servicing guides stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of FAA manuals by reference. (9) Keeping the station logs and other technical reports, and the submission of reports required by § 171.327. (10) Monitoring of the MLS facility. (11) Inspections by United States personnel… | ||||
| 14:14:3.0.1.4.33.10.3.14 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.327 Operational records. | FAA | The owner of the MLS facility or his maintenance representative must submit the following operational records at the indicated time to the appropriate FAA regional office where the facility is located. (a) Facility Equipment Performance & Adjustment Data (FAA Form 198). The FAA Form 198 shall be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of facility commissioning. One copy must be kept in the permanent records of the facility and two copies must be sent to the appropriate FAA regional office. The owner or his maintenance representative must revise the FAA Form 198 data after any major repair, modernization, or retuning to reflect an accurate record of facility operation and adjustment. (b) Facility Maintenance Log (FAA Form 6030-1). FAA Form 6030-1 is permanent record of all the activities required to maintain the MLS facility. The entries must include all malfunctions met in maintaining the facility including information on the kind of work and adjustments made, equipment failures, causes (if determined) and corrective action taken. In addition, the entries must include completion of periodic maintenance required to maintain the facility. The owner or his maintenance representative must keep the original of each form at the facility and send a copy to the appropriate FAA regional office at the end of each month in which it is prepared. However, where an FAA approved remote monitoring system is installed which precludes the need for periodic maintenance visits to the facility, monthly reports from the remote monitoring system control point must be forwarded to the appropriate FAA regional office, and a hard copy retained at the control point. (c) Technical Performance Record (FAA Form 6830 (formerly FAA Form 418)). This form contains a record of system parameters as specified in the manufacturer's equipment manual. This data will be recorded on each scheduled visit to the facility. The owner or his maintenance representative … | ||||
| 14:14:3.0.1.4.33.10.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.303 Definitions. | FAA | As used in this subpart: Auxiliary data means data transmitted in addition to basic data that provide ground equipment siting information for use in refining airborne position calculations and other supplementary information. Basic data means data transmitted by the ground equipment that are associated directly with the operation of the landing guidance system. Beam center means the midpoint between the −3 dB points on the leading and trailing edges of the scanning beam main lobe. Beamwidth means the width of the scanning beam main lobe measured at the −3 dB points and defined in angular units on the boresight, in the horizontal plane for the azimuth function and in the vertical plane for the elevation function. Clearance guidance sector means the volume of airspace, inside the coverage sector, within which the azimuth guidance information provided is not proportional to the angular displacement of the aircraft, but is a constant fly-left or fly-right indication of the direction relative to the approach course the aircraft should proceed in order to enter the proportional guidance sector. Control Motion Noise (CMN) means those fluctuations in the guidance which affect aircraft attitude, control surface motion, column motion, and wheel motion. Control motion noise is evaluated by filtering the flight error record with a band-pass filter which has corner frequencies at 0.3 radian/sec and 10 radians/sec for azimuth data and 0.5 radian/sec and 10 radians/sec for elevation data. Data rate means the average number of times per second that transmissions occur for a given function. Differential Phase Shift Keying (DPSK) means differential phase modulation of the radio frequency carrier with relative phase states of 0 degree or 180 degrees. Failure means the inability of an item to perform within previously specified limits. Guard time means an unused period of time provided in the transmitted signal format to allow for equipment tolerances. Integrity means that quality which relates to the trust whi… | ||||
| 14:14:3.0.1.4.33.10.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.305 Requests for IFR procedure. | FAA | (a) Each person who requests an IFR procedure based on an MLS facility which that person owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of §§ 171.309, 171.311, 171.313, 171.315, 171.317, 171.319, and 171.321 and is fabricated and installed in accordance with § 171.323. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of § 171.325. (4) A statement of intent to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this subparagraph. (b) FAA inspects and evaluates the MLS facility; it advises the owner of the results, and of any required changes in the MLS facility or in the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the MLS facility for an in-service evaluation by the FAA. | ||||
| 14:14:3.0.1.4.33.10.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.307 Minimum requirements for approval. | FAA | (a) The following are the minimum requirements that must be met before the FAA approves an IFR procedure for a non-Federal MLS facility: (1) The performance of the MLS facility, as determined by flight and ground inspection conducted by the FAA, must meet the requirements of §§ 171.309, 171.311, 171.313, 171.315, 171.317, 171.319, and 171.321. (2) The fabrication and installation of the equipment must meet the requirements of § 171.323. (3) The owner must agree to operate and maintain the MLS facility in accordance with § 171.325. (4) The owner must agree to furnish operational records as set forth in § 171.327 and agree to allow the FAA to inspect the facility and its operation whenever necessary. (5) The owner must assure the FAA that he will not withdraw the MLS facility from service without the permission of the FAA. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspection made before the MLS facility is commissioned. (b) [Reserved] | ||||
| 14:14:3.0.1.4.33.10.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.309 General requirements. | FAA | The MLS is a precision approach and landing guidance system which provides position information and various ground-to-air data. The position information is provided in a wide coverage sector and is determined by an azimuth angle measurement, an elevation angle measurement and a range (distance) measurement. (a) An MLS constructed to meet the requirements of this subpart must include: (1) Approach azimuth equipment, associated monitor, remote control and indicator equipment. (2) Approach elevation equipment, associated monitor, remote control and indicator equipment. (3) A means for the encoding and transmission of essential data words, associated monitor, remote control and indicator equipment. Essential data are basic data words 1, 2, 3, 4, and 6 and auxiliary data words A1, A2 and A3. (4) Distance measuring equipment (DME), associated monitor, remote control and indicator equipment. (5) Remote controls for paragraphs (a) (1), (2), (3), and (4) of this section must include as a minimum on/off and reset capabilities and may be integrated in the same equipment. (6) At locations where a VHF marker beacon (75 MHz) is already installed, it may be used in lieu of the DME equipment. (b) In addition to the equipment required in paragraph (a) of this section the MLS may include: (1) Back azimuth equipment, associated monitor, remote control and indicator equipment. When Back Azimuth is provided, a means for transmission of Basic Data Word 5 and Auxiliary Data Word A4 shall also be provided. (2) A wider proportional guidance sector which exceeds the minimum specified in §§ 171.313 and 171.317. (3) Precision DME, associated monitor, remote control and indicator equipment. (4) VHF marker beacon (75 MHz), associated monitor, remote control and indicator equipment. (5) The MLS signal format will accommodate additional functions (e.g., flare elevation) which may be included as desired. Remote controls for paragraphs (b) (1), (3) and (4) of this section must include as a minimum on/off and reset capabilities, and m… | ||||
| 14:14:3.0.1.4.33.10.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.311 Signal format requirements. | FAA | The signals radiated by the MLS must conform to the signal format in which angle guidance functions and data functions are transmitted sequentially on the same C-band frequency. Each function is identified by a unique digital code which initializes the airborne receiver for proper processing. The signal format must meet the following minimum requirements: (a) Frequency assignment. The ground components (except DME/Marker Beacon) must operate on a single frequency assignment or channel, using time division multiplexing. These components must be capable of operating on any one of the 200 channels spaced 300 KHz apart with center frequencies from 5031.0 MHz to 5090.7 MHz and with channel numbering as shown in Table 1a. The operating radio frequencies of all ground components must not vary by more than ±10 KHz from the assigned frequency. Any one transmitter frequency must not vary more than ±50 Hz in any one second period. The MLS angle/data and DME equipment must operate on one of the paired channels as shown in Table 1b. Table 1a —Frequency Channel Plan Table 1b —Channels Notes: * These channels are reserved exclusively for national allotments. ** These channels may be used for national allotment on a secondary basis. The primary reason for reserving these channels is to provide protection for the secondary Surveillance Radar (SSR) system. ▽ 108.0 MHz is not scheduled for assignment to ILS service. The associated DME operating channel No. 17X may be assigned to the emergency service. (b) Polarization. (1) The radio frequency emissions from all ground equipment must be nominally vertically polarized. Any horizontally polarized radio frequency emission component from the ground equipment must not have incorrectly coded angle information such that the limits specified in paragraphs (b) (2) and (3) of this section are exceeded. (2) Rotation of the receiving antenna thirty degrees from the vertically polarized position must not cause the path following error to exceed the allowed error at that location. … | ||||
| 14:14:3.0.1.4.33.10.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.313 Azimuth performance requirements. | FAA | This section prescribes the performance requirements for the azimuth equipment of the MLS as follows: (a) Approach azimuth coverage requirements. The approach azimuth equipment must provide guidance information in at least the following volume of space (see Figure 9): Table 8b —Auxiliary Data Word Address Codes Note 1: Parity bits I 19 and I 20 are chosen to satisfy the equations: I 13 + I 14 + I 15 + I 16 + I 17 + I 18 + I 19 = EVEN I 14 + I 16 + I 18 + I 20 = EVEN Note 1: Parity bits I 19 and I 20 are chosen to satisfy the equations: I 13 + I 14 + I 15 + I 16 + I 17 + I 18 + I 19 = EVEN I 14 + I 16 + I 18 + I 20 = EVEN Table 8c—Auxiliary Data Parity bits I 70 to I 76 are chosen to satisfy the equations which follow: For BIT I 70 : Even = (I 13 + ... + I 18 ) + I 20 + I 22 + I 24 + I 25 + I 28 + I 29 + I 31 + I 32 + I 33 + I 35 + I 36 + I 38 + I 41 + I 44 + I 45 + I 46 + I 50 + (I 52 + ... + I 55 ) + I 58 + I 60 + I 64 + I 65 + I 70 For BIT I 71 : Even = (I 14 + ... + I 19 ) + I 21 + I 23 + I 25 + I 26 + I 29 + I 30 + I 32 + I 33 + I 34 + I 36 + I 37 + I 39 + I 42 + I 45 + I 46 + I 47 + I 51 + (I 53 + ... + I 56 ) + I 59 + I 61 + I 65 + I 66 + I 71 For BIT I 72 : Even = (I 15 + ... + I 20 ) + I 22 + I 24 + I 26 + I 27 + I 30 + I 31 + I 33 + I 34 + I 35 + I 37 + I 38 + I 40 + I 43 + I 46 + I 47 + I 48 + I 52 + (I 54 + ... + I 57 ) + I 60 + I 62 + I 66 + I 67 + I 72 For BIT I 73 : Even = (I 16 + ... + I 21 ) + I 23 + I 25 + I 27 + I 28 + I 31 + I 32 + I 34 + I 35 + I 36 + I 38 + I 39 + I 41 + I 44 + I 47 + I 48 + I 49 + I 53 + (I 55 + ... + I 58 ) + I 61 + I 63 + I 67 + I 68 + I 73 For BIT I 74 : Even = (I 17 + ... + I 22 ) + I 24 + I 26 + I 28 + I 29 + I 32 + I 33 + I 35 + I 36 + I 37 + I 39 + I 40 + I 42 + I 45 + I 48 + I 49 + I 50 + I 54 + (I 56 + ... + I 59 ) + I 62 + I 64 + I 68 + I 69 + I 74 For BIT I 75 : Even = (I 13 + ... + I 17 ) + … | ||||
| 14:14:3.0.1.4.33.10.3.8 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.315 Azimuth monitor system requirements. | FAA | (a) The approach azimuth or back azimuth monitor system must cause the radiation to cease and a warning must be provided at the designated control point if any of the following conditions persist for longer than the periods specified: (1) There is a change in the ground equipment contribution to the mean course error component such that the path following error at the reference datum or in the direction of any azimuth radial, exceeds the limits specified in §§ 171.313(e)(1) or 171.313(j) for a period of more than one second. The above requirement and the requirement to limit the ground equipment mean error to ±10 ft. can be satisfied by the following procedure. The integral monitor alarm limit should be set to the angular equivalent of ±10 ft. at the approach reference datum. This will limit the electrical component of the mean course error to ±10 ft. The field monitor alarm limit should be set such that with the mean course error at the alarm limit the total allowed PFE is not exceeded on any commissioned approach course from the limit of coverage to an altitude of 100 feet. (2) There are errors in two consecutive transmissions of Basic Data Words 1, 2, 4 or 5. (3) There is a reduction in the radiated power to a level not less than that specified in §§ 171.313(a)(4) or 171.313(g)(4) for a period of more than one second. (4) There is an error in the preamble DPSK transmissions which occurs more than once in any one second period. (5) There is an error in the time division multiplex synchronization of a particular azimuth function that the requirement specified in § 171.311(e) is not satisfied and if this condition persists for more than one second. (6) A failure of the monitor is detected. (b) Radiation of the following fuctions must cease and a warning provided at the designated control point if there are errors in 2 consecutive transmissions: (1) Morse Code Identification, (2) Basic Data Words 3 and 6, (3) Auxiliary Data Words. (c) The period during which erroneous guidance information is radiated m… | ||||
| 14:14:3.0.1.4.33.10.3.9 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | J | Subpart J—Microwave Landing System (MLS) | § 171.317 Approach elevation performance requirements. | FAA | This section prescribes the performance requirements for the elevation equipment components of the MLS as follows: (a) Elevation coverage requirements. The approach elevation facility must provide proportional guidance information in at least the following volume of space (see Figure 13): (1) Laterally within a sector originating at the datum point which is at least equal to the proportional guidance sector provided by the approach azimuth ground equipment. (2) Longitudinally from 75 meters (250 feet) from the datum point to 20 nautical miles from threshold in the direction of the approach. (3) Vertically within the sector bounded by: (i) A surface which is the locus of points 2.5 meters (8 feet) above the runway surface; (ii) A conical surface originating at the datum point and inclined 0.9 degree above the horizontal and, (iii) A conical surface originating at the datum point and inclined at 15.0 degrees above the horizontal up to a height of 6000 meters (20,000 feet). Where the physical characteristics of the approach region prevent theachievement of the standards under paragraphs (a) (1), (2), and (3) of this section, guidance need not be provided below a conical surface originating at the elevation antenna and inclined 0.9 degree above the line of sight. (4) Within the elevation coverage sector defined in paragraphs (a) (1), (2) and (3) of this section, the power densities must not be less than those shown in Table 9, but the equipment design must also allow for: (i) Transmitter power degradation from normal by −1.5 dB. (ii) Rain loss of −2.2 dB at the coverage extremes. (b) Elevation siting requirements. The Elevation Antenna System must: (1) Be located as close to runway centerline as possible (without violating obstacle clearance criteria). (2) Be located near runway threshold such that the asymptote of the minimum glidepath crosses the threshold of the runway at the Approach Reference Datum height. Normally, the minimum glidepath should be 3 degrees and the Approach Reference Datum heig… | ||||
| 14:14:3.0.1.4.33.2.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.21 Scope. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966; Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | (a) This subpart sets forth minimum requirements for the approval and operation of non-Federal, nondirectional radio beacon facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. (b) A nondirectional radio beacon (“H” facilities domestically—NDB facilities internationally) radiates a continuous carrier of approximately equal intensity at all azimuths. The carrier is modulated at 1020 cycles per second for station identification purposes. | |||
| 14:14:3.0.1.4.33.2.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.23 Requests for IFR procedure. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | (a) Each person who requests an IFR procedure based on a nondirectional radio beacon facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.27 and is installed in accordance with § 171.29. (2) A proposed procedure for operating the facility. (3) A proposed maintenance arrangement and a maintenance manual that meets the requirements of § 171.31. (4) A statement of intention to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this subparagraph. (b) After the FAA inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the FAA. | |||
| 14:14:3.0.1.4.33.2.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.25 Minimum requirements for approval. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-6, 35 FR 10288, June 24, 1970] | (a) The following are the minimum requirements that must be met before the FAA will approve an IFR procedure for a non-Federal, nondirectional radio beacon facility under this subpart: (1) The facility's performances, as determined by air and ground inspection, must meet the requirements of § 171.27. (2) The installation of the equipment must meet the requirements of § 171.29. (3) The owner must agree to operate and maintain the facility in accord- ance with § 171.31. (4) The owner must agree to furnish periodic reports, as set forth in § 171.33, and agree to allow the FAA to inspect the facility and its operation whenever necessary. (5) The owner must assure the FAA that he will not withdraw the facility from service without the permission of the FAA. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the Federal Aviation Administration may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the FAA commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. In addition, the facility may be de-commissioned whenever the frequency channel is needed for higher priority common system service. | |||
| 14:14:3.0.1.4.33.2.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.27 Performance requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | (a) The facility must meet the performance requirements set forth in the “International Standards and Recommended Practices, Aeronautical Telecommunications, Part I, paragraph 3.4” (Annex 10 to the Convention on International Civil Aviation), except that identification by on-off keying of a second carrier frequency, separated from the main carrier by 1020 Hz plus or minus 50 Hz, is also acceptable. (b) The facility must perform in accordance with recognized and accepted good electronic engineering practices for the desired service. (c) Ground inspection consists of an examination of the design features of the equipment to determine (based on recognized and accepted good engineering practices) that there will not be conditions that will allow unsafe operations because of component failure or deterioration. (d) Flight tests to determine the facility's adequacy for operational requirements and compliance with applicable “Standards and Recommended Practices” are conducted in accord- ance with the “U.S. Standard Flight Inspection Manual”, particularly section 207. The original test is made by the FAA and later tests shall be made under arrangements, satisfactory to the FAA, that are made by the owner. | |||
| 14:14:3.0.1.4.33.2.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.29 Installation requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-16, 56 FR 65664, Dec. 17, 1991] | (a) The facility must be installed according to accepted good engineering practices, applicable electric and safety codes, and FCC licensing requirements. (b) The facility must have a reliable source of suitable primary power. (c) Dual transmitting equipment may be required to support some IFR procedures. (d) A facility intended for use as an instrument approach aid for an airport must have or be supplemented by (depending on the circumstances) the following ground-air or landline communications services: (1) At facilities outside of and not immediately adjacent to controlled airspace, there must be ground-air communications from the airport served by the facility. Voice on the aid controlled from the airport is acceptable. (2) At facilities within or immediately adjacent to controlled airspace, there must be the ground-air communications required by paragraph (d)(1) of this section and reliable communications (at least a landline telephone) from the airport to the nearest FAA air traffic control or communication facility. Paragraphs (d) (1) and (2) of this section are not mandatory at airports where an adjacent FAA facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure. In addition, at low traffic density airports within or immediately adjacent to controlled airspace, and where extensive delays are not a factor, the requirements of paragraphs (d) (1) and (2) of this section may be reduced to reliable communications (at least a landline telephone) from the airport to the nearest FAA air traffic control or communications facility, if an adjacent FAA facility can communicate with aircraft during the proposed instrument approach procedure, at least down to the minimum en route altitude for the controlled airspace area. | |||
| 14:14:3.0.1.4.33.2.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.31 Maintenance and operations requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966] | (a) The owner of the facility must establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility must meet at least the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility including proficiency in maintenance procedures and the use of specialized test equipment. (b) The owner must prepare, and obtain approval of, an operations and maintenance manual that sets forth mandatory procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons only. (3) FCC licensing requirements for operating and maintenance personnel. (4) Posting of licenses and signs. (5) Relations between the facility and FAA air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable), and instructions for the operation of an air traffic advisory service if the facility is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed arrangements for maintenance flight inspection and servicing stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.33. (10) Monitoring of the facility, at least once each half hour, to assure continuous operation. (11) Inspections by United States personnel. (12) Names, addresses, and telephone numbers of persons to be notified in an emergency. (13) Shutdowns for routine maintenance and issue of “Notices to Airmen… | |||
| 14:14:3.0.1.4.33.2.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | B | Subpart B—Nondirectional Radio Beacon Facilities | § 171.33 Reports. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports, at the times indicated, to the FAA Regional office for the area in which the facility is located: (a) Record of meter readings and adjustments ( Form FAA-198 ). To be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional Office of the FAA. The owner shall revise the form after any major repair, modernization, or returning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log ( FAA Form 6030-1 ). This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional Office of the FAA at the end of the month in which it is prepared. (c) Radio equipment operation record ( Form FAA-418 ). To contain a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional Office of the FAA. | |||
| 14:14:3.0.1.4.33.3.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.41 Scope. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966; Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | This subpart sets forth minimum requirements for the approval and operation of non-Federal Instrument Landing System (ILS) Facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. | |||
| 14:14:3.0.1.4.33.3.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.43 Requests for IFR procedure. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-7, 35 FR 12711, Aug. 11, 1970] | (a) Each person who requests an IFR procedure based on an ILS facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.47 and is installed in accordance with § 171.49. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of § 171.51. (4) A statement of intent to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this subparagraph. (b) After the FAA inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the FAA. | |||
| 14:14:3.0.1.4.33.3.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.45 Minimum requirements for approval. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-6, 35 FR 10288, June 24, 1970] | (a) The following are the minimum requirements that must be met before the FAA will approve an IFR procedure for a non-Federal Instrument Landing System: (1) The facility's performance, as determined by air and ground inspection, must meet the requirements of § 171.47. (2) The installation of the equipment must meet the requirements of § 171.49. (3) The owner must agree to operate and maintain the facility in accord- ance with § 171.51. (4) The owner must agree to furnish periodic reports, as set forth in § 171.53 and agree to allow the FAA to inspect the facility and its operation whenever necessary. (5) The owner must assure the FAA that he will not withdraw the facility from service without the permission of the FAA. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the Federal Aviation Administration may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the FAA commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. In addition, the facility may be de-commissioned whenever the frequency channel is needed for higher priority common system service. | |||
| 14:14:3.0.1.4.33.3.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.47 Performance requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1974, as amended by Amdt. 171-9, 38 FR 28557, Oct. 15, 1973] | (a) The Instrument Landing System must perform in accordance with the “International Standards and Recommended Practices, Aeronautical Telecommunications, Part I, Paragraph 3.1” (Annex 10 to the Convention on International Civil Aviation) except as follows: (1) The first part of paragraph 3.1.3, relating to suppression of radiation wholly or in part in any or all directions outside the 20-degree sector centered on the course line to reduce localizer does not apply. (2) Radiation patterns must conform to limits specified in 3.1.3.3 and 3.1.3.4, but this does not mean that suppression of radiation to the rear of the antenna array to satisfy difficult siting positions (as per 3.1.3.1.4) is not allowed. For example, if a reflector screen for the antenna array is required to overcome a siting problem, the area to the rear of the localizer may be made unusable and should be so advertised. (3) A third marker beacon (inner marker) is not required. (4) The frequency tolerance of the radio frequency carrier must not exceed plus or minus 0.002 percent. (b) Ground inspection consists of an examination of the design features of the equipment to determine that there will not be conditions that will allow unsafe operations because of component failure or deterioration. (c) The monitor is checked periodically, during the in-service test evaluation period, for calibration and stability. These tests, and ground checks of glide slope and localizer radiation characteristics, are conducted in accordance with FAA Handbooks AF P 6750.1 and AF P 6750.2 “Maintenance Instructions for ILS Localizer Equipment” and “Maintenance Instructions for ILS Glide Slope Equipment”. (d) Flight tests to determine the facility's adequacy for operational requirements and compliance with applicable “Standards and Recommended Practices” are conducted in accord- ance with the “U.S. Standard Flight Inspection Manual”, particularly section 217. | |||
| 14:14:3.0.1.4.33.3.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.49 Installation requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-6, 35 FR 10288, June 24, 1970; Amdt. 171-16, 56 FR 65664, Dec. 17, 1991] | (a) The facility must be of a permanent nature, located, constructed, and installed according to ICAO Standards (Annex 10), accepted good engineering practices, applicable electric and safety codes, and FCC licensing requirements. (b) The facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated. A determination by the Administrator as to whether a facility will be required to have stand-by power for the localizer, glide slope and monitor accessories to supplement the primary power, will be made for each airport based upon operational minimums and density of air traffic. (c) A determination by the Administrator as to whether a facility will be required to have dual transmitting equipment with automatic changeover for localizer and glide slope components, will be made for each airport based upon operational minimums and density of air traffic. (d) There must be a means for determining, from the ground, the perform- ance of the equipment (including antennae), initially and periodically. (e) The facility must have, or be supplemented by (depending on the circumstances) the following ground-air or landline communications services: (1) At facilities outside of and not immediately adjacent to controlled airspace, there must be ground-air communications from the airport served by the facility. The utilization of voice on the ILS frequency should be determined by the facility operator on an individual basis. (2) At facilities within or immediately adjacent to controlled airspace, there must be the ground-air communications required by paragraph (e)(1) of this section and reliable communications (at least a landline telephone) from the airport to the nearest FAA air traffic control or communications facility. Paragraphs (e)(1) and (e)(2) of this section are not mandatory at airports where an adjacent FAA facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure. In addition, at l… | |||
| 14:14:3.0.1.4.33.3.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.51 Maintenance and operations requirements. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-2, 31 FR 5408, Apr. 6, 1966] | (a) The owner of the facility must establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility must meet at least the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility including proficiency in maintenance procedures and the use of specialized test equipment. (b) The owner must prepare, and obtain approval of, an operations and maintenance manual that sets forth mandatory procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons only. (3) FCC licensing requirements for operating and maintenance personnel. (4) Posting of licenses and signs. (5) Relation between the facility and FAA air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable), and instructions for the operations of an air traffic advisory service if the facility is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and specific maintenance procedures and servicing guides stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.53. (10) Monitoring of the facility. (11) Inspections by United States personnel. (12) Names, addresses, and telephone numbers of persons to be notified in an emergency. (13) Shutdowns for routine maintenance and issue of “Notices to Airmen” for routine or emergency shutdowns (private use facilities may o… | |||
| 14:14:3.0.1.4.33.3.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | C | Subpart C—Instrument Landing System (ILS) Facilities | § 171.53 Reports. | FAA | [Docket 5034, 29 FR 11337, Aug. 6, 1964, as amended by Amdt. 171-5, 34 FR 15245, Sept. 30, 1969; Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports, at the times indicated, to the FAA Regional Office for the area in which the facility is located: (a) Record of meter readings and adjustments ( Form FAA-198 ). To be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional Office of the FAA. The owner shall revise the form after any major repair, modernization, or retuning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log ( FormFAA 6030-1 ). This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional Office of the FAA at the end of each month in which it is prepared. (c) Radio equipment operation record ( Form FAA-418 ). To contain a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional Office of the FAA. | |||
| 14:14:3.0.1.4.33.4.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | D | Subpart D—True Lights | § 171.61 Air navigation certificate: Revocation and termination. | FAA | [Amdt. 171-4, 33 FR 12545, Sept. 5, 1968] | (a) Except as provided in paragraph (b) of this section, each air navigation certificate of “Lawful Authority to Operate a True Light” is hereby revoked, and each application therefor is hereby terminated. (b) Paragraph (a) of this section does not apply to— (1) A certificate issued to a Federal-Aid Airport Program sponsor who was required to apply for that certificate under regulations then in effect, and who has not surrendered that certificate under § 151.86(e) of this chapter; or (2) An application made by a Federal-Aid Airport Program sponsor who was required to make that application under regulations then in effect, and who has not terminated that application under § 151.86(e) of this chapter. | |||
| 14:14:3.0.1.4.33.5.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | E | Subpart E—General | § 171.71 Materials incorporated by reference. | FAA | [Amdt. 171-8, 36 FR 5584, Mar. 25, 1971] | Copies of standards, recommended practices and documents incorporated by reference in this part are available for the use of interested persons at any FAA Regional Office and FAA Headquarters. An historical file of these materials is maintained at Headquarters, Federal Aviation Administration, 800 Independence Avenue SW., Washington, DC 20590. | |||
| 14:14:3.0.1.4.33.5.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | E | Subpart E—General | § 171.73 Alternative forms of reports. | FAA | [Amdt. 171-5, 34 FR 15245, Sept. 30, 1969, as amended by Amdt. 171-15, 54 FR 39296, Sept. 25, 1989] | On a case-by-case basis, a Regional Administrator may accept any report in a format other than the FAA form required by this part if he is satisfied that the report contains all the information required on the FAA form and can be processed by FAA as conveniently as the FAA form. | |||
| 14:14:3.0.1.4.33.5.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | E | Subpart E—General | § 171.75 Submission of requests. | FAA | [Amdt. 171-7, 35 FR 12711, Aug. 11, 1970, as amended by Amdt. 171-15, 54 FR 39296, Sept. 25, 1989] | (a) Requests for approval of facilities not having design and operational characteristics identical to those of facilities currently approved under this part, including requests for deviations from this part for such facilities, must be submitted to the Director, Advanced Systems Design Service. (b) The following requests must be submitted to the Regional Administrator of the region in which the facility is located: (1) Requests for approval of facilities that have design and operational characteristics identical to those of facilities currently approved under this part, including requests for deviations from this part for such facilities. (2) Requests for deviations from this part for facilities currently approved under this part. (3) Requests for modification of facilities currently approved under this part. | |||
| 14:14:3.0.1.4.33.6.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.101 Scope. | FAA | This subpart sets forth minimum requirements for the approval and operation of non-Federal Simplified Directional Facilities (SDF) that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. | ||||
| 14:14:3.0.1.4.33.6.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.103 Requests for IFR procedure. | FAA | (a) Each person who requests an IFR procedure based on an SDF that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.109 and the standards and tolerances of § 171.111, and is installed in accordance with § 171.113. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of § 171.115. (4) A statement of intent to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability as prescribed in § 171.111(k), and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this paragraph. (b) After the Federal Aviation Administration inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the Federal Aviation Administration. | ||||
| 14:14:3.0.1.4.33.6.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.105 Minimum requirements for approval. | FAA | (a) The following are the minimum requirements that must be met before the Federal Aviation Administration will approve an IFR procedure for a non-Federal Simplified Directional Facility: (1) A suitable frequency channel must be available. (2) The facility's performance, as determined by air and ground inspection, must meet the requirements of §§ 171.109 and 171.111. (3) The installation of the equipment must meet the requirements of § 171.113. (4) The owner must agree to operate and maintain the facility in accordance with § 171.115. (5) The owner must agree to furnish periodic reports as set forth in § 171.117, and agree to allow the FAA to inspect the facility and its operation whenever necessary. (6) The owner must assure the FAA that he will not withdraw the facility from service without the permission of the FAA. (7) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the FAA may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the FAA commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. In addition, the facility is licensed by the Federal Communications Commission. The Federal Aviation Administration recommends cancellation or nonrenewal of the Federal Communications Commission license whenever the frequency channel is needed for higher priority common system service. | ||||
| 14:14:3.0.1.4.33.6.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.107 Definition. | FAA | As used in this subpart: SDF (simplified directional facility) means a directional aid facility providing only lateral guidance (front or back course) for approach from a final approach fix. DDM (difference in depth of modulation) means the percentage modulation depth of the larger signal minus the percentage modulation depth of the smaller signal, divided by 100. Angular displacement sensitivity means the ratio of measured DDM to the corresponding angular displacement from the appropriate reference line. Back course sector means the course sector on the opposite end of the runway from the front course sector. Course line means the locus of points along the final approach course at which the DDM is zero. Course sector means a sector in a horizontal plane containing the course line and limited by the loci of points nearest to the course line at which the DDM is 0.155. Displacement sensitivity means the ratio of measured DDM to the corresponding lateral displacement from the appropriate reference line. Front course sector means the course sector centered on the course line in the direction from the runway in which a normal final approach is made. Half course sector means the sector in a horizontal plane containing the course line and limited by the loci of points nearest to the course line, at which the DDM is 0.0775. Point A means a point on the front course in the approach direction a distance of 4 nautical miles from the threshold. Point A1 means a point on the front course in the approach direction a distance of 1 statute mile from the threshold. Point A2 means a point on the front course at the threshold. Reference datum means a point at a specified height located vertically above the intersection of the course and the threshold. Missed approach point means the point on the final approach course, not farther from the final approach fix than Point “A2”, at which the approach must be abandoned, if the approach and subsequent landing cannot be safely completed by visual reference, whet… | ||||
| 14:14:3.0.1.4.33.6.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.109 Performance requirements. | FAA | [Docket 10116, 35 FR 12711, Aug. 11, 1970, as amended by Amdt. 171-9, 38 FR 28557, Oct. 15, 1973] | (a) The Simplified Directional Facility must perform in accordance with the following standards and practices: (1) The radiation from the SDF antenna system must produce a composite field pattern which is amplitude modulated by a 90 Hz and a 150 Hz tone. The radiation field pattern must produce a course sector with the 90 Hz tone predominating on one side of the course and with the 150 Hz tone predominating on the opposite side. (2) When an observer faces the SDF from the approach end of runway, the depth of modulation of the radio frequency carrier due to the 150 Hz tone must predominate on his right hand and that due to the 90 Hz tone must predominate on his left hand. (3) All horizontal angles employed in specifying the SDF field patterns must originate from the center of the antenna system which provides the signals used in the front course sector. (4) The SDF must operate on odd tenths or odd tenths plus a twentieth MHz within the frequency band 108.1 MHz to 111.95 MHz. The frequency tolerance of the radio frequency carrier must not exceed plus or minus 0.002 percent. (5) The radiated emission from the SDF must be horizontally polarized. The vertically polarized component of the radiation on the course line must not exceed that which corresponds to an error one-twentieth of the course sector width when an aircraft is positioned on the course line and is in a roll attitude of 20° from the horizontal. (6) The SDF must provide signals sufficient to allow satisfactory operation of a typical aircraft installation within the sector which extends from the center of the SDF antenna system to distances of 18 nautical miles within a plus or minus 10° sector and 10 nautical miles within the remainder of the coverage when alternative navigational facilities provide satisfactory coverage within the intermediate approach area. SDF signals must be receivable at the distances specified at and above a height of 1,000 feet above the elevation of the threshold, or the lowest altitude authorized for transition, whichever … | |||
| 14:14:3.0.1.4.33.6.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.111 Ground standards and tolerances. | FAA | [Docket 10116, 35 FR 12711, Aug. 11, 1970, as amended by Amdt. 171-9, 38 FR 28558, Oct. 15, 1973] | Compliance with this section must be shown as a condition to approval and must be maintained during operation of the SDF. (a) Frequency. (1) The SDF must operate on odd tenths or odd tenths plus a twentieth MHz within the frequency band 108.1 MHz to 111.95 MHz. The frequency tolerance of the radio frequency carrier must not exceed plus or minus 0.002 percent. (2) The modulating tones must be 90 Hz and 150 Hz within ±2.5 percent. (3) The identification signal must be 1020 Hz within ±50 Hz. (4) The total harmonic content of the 90 Hz tone must not exceed 10 percent. (5) The total harmonic content of the 150 Hz tone must not exceed 10 percent. (b) Power output. The normal carrier power output must be of a value which will provide coverage requirements of § 171.109(a)(6) when reduced by 3 dB to the monitor RF power reduction alarm point specified in § 171.111(j)(3). (c) VSWR. (1) The VSWR of carrier and sideband feedlines must be a nominal value of 1/1 and must not exceed 1.2/1. (2) The sponsor will also provide additional manufacturer's ground standards and tolerances for all VSWR parameters peculiar to the equipment which can effect performance of the facility in meeting the requirements specified in §§ 171.109 and 171.111. (d) Insulation resistance. The insulation resistance of all coaxial feedlines must be greater than 20 megohms. (e) Depth of modulation. (1) The depth of modulation of the radio frequency carrier due to each of the 90 Hz and 150 Hz tones must be 20 percent ±2 percent along the course line. (2) The depth of modulation of the radio frequency carrier due to the 1020 Hz identification signal must be within 5 percent to 15 percent. (f) Course sector width. The standard course sector width must be 6° or 12°. The course sector must be maintained with ±17 percent of the standard. (g) Course alignment. Course alignment must be as specified in § 171.109(a)(8). (h) Back course alignment and width. If a back course is provided, standards and tolerances for back course sector wid… | |||
| 14:14:3.0.1.4.33.6.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.113 Installation requirements. | FAA | [Docket 10116, 35 FR 12711, Aug. 11, 1970, as amended by Amdt. 171-16, 56 FR 65664, Dec. 17, 1991] | (a) The facility must be installed according to accepted good engineering practices, applicable electric and safety codes, and FCC requirements. (b) The SDF facility must have the following basic components: (1) VHF SDF equipment and associated monitor system; (2) Remote control, and indicator equipment (remote monitor) when required by the FAA; (3) A final approach fix; and (4) Compass locator (COMLO) or marker if suitable fixes and initial approach routes are not available from existing facilities. (c) The facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated. Also, adequate power capacity must be provided for operation of test and working equipment at the SDF. A determination by the Federal Aviation Administration as to whether a facility will be required to have standby power for the SDF and monitor accessories to supplement the primary power will be made for each airport based upon operational minimums and density of air traffic. (d) A determination by the Federal Aviation Administration as to whether a facility will be required to have dual transmitting equipment with automatic changeover for the SDF will be made for each airport based upon operational minimums and density of air traffic. (e) There must be a means for determining, from the ground, the performance of the equipment (including antennae), initially and periodically. (f) The facility must have the following ground-air or landline communication services: (1) At facilities outside of and not immediately adjacent to controlled airspace, there must be ground-air communications from the airport served by the facility. The utilization of voice on the SDF should be determined by the facility operator on an individual basis. (2) At facilities within or immediately adjacent to controlled airspace, there must be ground/air communications required by paragraph (b)(1) of this section and reliable communications (at least a landline telephone) from the airport to the nearest Fe… | |||
| 14:14:3.0.1.4.33.6.3.8 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.115 Maintenance and operations requirements. | FAA | (a) The owner of the facility shall establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility shall meet at a minimum the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility, including proficiency in maintenance procedures and the use of specialized test equipment. (b) The SDF must be designed and maintained so that the probability of operation within the performance requirements specified is high enough to insure an adequate level of safety. In the event out-of-tolerance conditions develop, the facility shall be removed from operation, and the designated control point notified. (c) The owner must prepare, and obtain approval of, and each person operating or maintaining the facility shall comply with, an operations and maintenance manual that sets forth procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. This includes provisions for designating critical areas relative to the facility and preventing or controlling movements within the facility that may adversely affect SDF operations. (2) Maintenance and operations by authorized persons only. (3) Federal Communications Commission requirements for operating personnel and maintenance personnel. (4) Posting of licenses and signs. (5) Relation between the facility and Federal Aviation Administration air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable), and instructions for the operation of an air traffic advisory service if the facility is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and spec… | ||||
| 14:14:3.0.1.4.33.6.3.9 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | F | Subpart F—Simplified Directional Facility (SDF) | § 171.117 Reports. | FAA | [Docket 10116, 35 FR 12711, Aug. 11, 1970, as amended by Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports, at the time indicated, to the Federal Aviation Administration Regional Office for the area in which the facility is located: (a) Record of meter readings and adjustments (Form FAA-198). To be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional Office of the Federal Aviation Administration. The owner shall revise the form after any major repair, modification, or retuning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log (FAA Form 6030-1) This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional Office of the Federal Aviation Administration at the end of each month in which it is prepared. (c) Radio equipment operation record (Form FAA-418), containing a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional Office of the Federal Aviation Administration. | |||
| 14:14:3.0.1.4.33.7.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.151 Scope. | FAA | This subpart sets forth minimum requirements for the approval and operation of non-Federal DME facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. | ||||
| 14:14:3.0.1.4.33.7.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.153 Requests for IFR procedure. | FAA | (a) Each person who requests an IFR procedure based on a DME facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.157 and is installed in accordance with § 171.159. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and maintenance manual that meets the requirement of § 171.161. (4) A statement of intention to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this paragraph. (b) After the Federal Aviation Administration inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the Federal Aviation Administration. | ||||
| 14:14:3.0.1.4.33.7.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.155 Minimum requirements for approval. | FAA | (a) The following are the minimum requirements that must be met before the Federal Aviation Administration will approve an IFR procedure for a non-Federal DME: (1) A suitable frequency channel must be available. (2) The facility's performance, as determined by air and ground inspection, must meet the requirements of § 171.157. (3) The installation of the equipment must meet the requirements of § 171.159. (4) The owner must agree to operate and maintain the facility in accordance with § 171.161. (5) The owner must agree to furnish periodic reports, as set forth in § 171.163, and must agree to allow the Federal Aviation Administration to inspect the facility and its operation whenever necessary. (6) The owner must assure the Federal Aviation Administration that he will not withdraw the facility from service without the permission of the Federal Aviation Administration. (7) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the Federal Aviation Administration may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the Federal Aviation Administration commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. | ||||
| 14:14:3.0.1.4.33.7.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.157 Performance requirements. | FAA | [Docket 10116, 35 FR 12715, Aug. 11, 1970, as amended by Amdt. 171-13, 50 FR 4875, Nov. 27, 1985] | (a) The DME must meet the performance requirements set forth in the “International Standards and Recommended Practices. Aeronautical Telecommunications, Part I, Paragraph 3.5” (Annex 10 to the Convention of International Civil Aviation). (b) It must be shown during ground inspection of the design features of the equipment that there will not be conditions that will allow unsafe operations because of component failure or deterioration. (c) The monitor must be checked periodically, during the in-service test evaluation period, for calibration and stability. These tests and ground tests of the functional and performance characteristics of the DME transponder must be conducted in accordance with the maintenance manual required by § 171.161(b). (d) Flight inspection to determine the adequacy of the facility's operational performance and compliance with applicable “Standards and Recommended Practices” must be accomplished in accordance with the “U.S. Standard Flight Inspection Manual.” | |||
| 14:14:3.0.1.4.33.7.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.159 Installation requirements. | FAA | [Docket 10116, 35 FR 12715, Aug. 11, 1970, as amended by Amdt. 171-16, 56 FR 65665, Dec. 17, 1991] | (a) The facility must be installed according to accepted good engineering practices, applicable electric and safety codes, and Federal Communications Commission requirements. (b) The facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated, with a supplemental standby system, if needed. (c) Dual transmitting equipment with automatic changeover is preferred and may be required to support certain IFR procedures. (d) There must be a means for determining from the ground, the performance of the equipment, initially and periodically. (e) A facility intended for use as an instrument approach aid for an airport must have or be supplemented by the following ground air or landline communications services: (1) At facilities outside of and not immediately adjacent to controlled airspace, there must be ground-air communications from the airport served by the facility. Separate communications channels are acceptable. (2) At facilities within or immediately adjacent to controlled airspace, there must be the ground-air communications required by paragraph (e)(1) of this section and reliable communications (at least a landline telephone) from the airport to the nearest Federal Aviation Administration air traffic control or communications facility. Separate communications channels are acceptable. Compliance with paragraphs (e) (1) and (2) of this section need not be shown at airports where an adjacent Federal Aviation Administration facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure. In addition, at low traffic density airports within or immediately adjacent to controlled airspace, and where extensive delays are not a factor, the requirements of paragraphs (e) (1) and (2) of this section may be reduced to reliable communications (at least a landline telephone) from the airport to the nearest Federal Aviation Administration air traffic control or communications facility, if an adj… | |||
| 14:14:3.0.1.4.33.7.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.161 Maintenance and operations requirements. | FAA | (a) The owner of the facility shall establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility shall meet at a minimum the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility, including proficiency in maintenance procedures and the use of specialized test equipment. (b) The owner must prepare and obtain Federal Aviation Administration approval of, and each person operating or maintaining the facility shall comply with, an operations and maintenance manual that sets forth procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons only. (3) Federal Communications Commission's requirements and maintenance personnel. (4) Posting of licenses and signs. (5) Relations between the facility and Federal Aviation Administration air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable), and instructions for the operation of an air traffic advisory service if the DME is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and specific maintenance procedures and servicing guides stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of Federal Aviation Administration manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.163. (10) Monitoring of the facility. (11) Inspections by U.S. personnel. (12) Names, addresses, and telephone numbers of persons to be notified in… | ||||
| 14:14:3.0.1.4.33.7.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | G | Subpart G—Distance Measuring Equipment (DME) | § 171.163 Reports. | FAA | [Docket 10116, 35 FR 12715, Aug. 11, 1970, as amended by Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports on forms furnished by the FAA, at the time indicated, to the FAA Regional office for the area in which the facility is located: (a) Record of meter readings and adjustments (Form FAA-198). To be filled out by the owner with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional office of the FAA. The owner shall revise the form after any major repair, modification, or returning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log (FAA Form 6030-1). This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional Office of the Federal Aviation Administration at the end of the month in which it is prepared. (c) Radio equipment operation record (Form FAA-418), containing a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional Office of the Federal Aviation Administration. | |||
| 14:14:3.0.1.4.33.8.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.201 Scope. | FAA | (a) This subpart sets forth minimum requirements for the approval and operation of non-Federal VHF marker beacon facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. (b) [Reserved] | ||||
| 14:14:3.0.1.4.33.8.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.203 Requests for IFR procedure. | FAA | (a) Each person who requests an IFR procedure which will incorporate the use of a VHF marker beacon facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of § 171.207 and is installed in accordance with § 171.209. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of § 171.211. (4) A statement of intent to meet the requirement of this subpart. (5) A showing that the facility has an acceptable level of operational reliability, and an acceptable standard of performance. Previous equivalent operational experience may be shown to comply with this subparagraph. (b) After the Federal Aviation Administration inspects and evaluates the facility, it advises the owner of the results and of any required changes in the facility or the maintenance manual or maintenance organization. The owner shall then correct the deficiencies, if any, and operate the facility for an in-service evaluation by the Federal Aviation Administration. | ||||
| 14:14:3.0.1.4.33.8.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.205 Minimum requirements for approval. | FAA | (a) The following are the minimum requirements that must be met before the Federal Aviation Administration will approve an IFR procedure which incorporates the use of a non-Federal VHF marker beacon facility under this subpart: (1) The facility's performances, as determined by air and ground inspection, must meet the requirements of § 171.207. (2) The installation of the equipment must meet the requirements of § 171.209. (3) The owner must agree to operate and maintain the facility in accordance with § 171.211. (4) The owner must agree to furnish periodic reports, as set forth in § 171.213, and agree to allow the Federal Aviation Administration to inspect the facility and its operation whenever necessary. (5) The owner must assure the Federal Aviation Administration that he will not withdraw the facility from service without the permission of the Federal Aviation Administration. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspections made before the facility is commissioned, except that the Federal Aviation Administration may bear certain of these costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the Federal Aviation Administration commissions the facility as a prerequisite to its approval for use in an IFR procedure. The approval is withdrawn at any time the facility does not continue to meet those requirements. | ||||
| 14:14:3.0.1.4.33.8.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.207 Performance requirements. | FAA | (a) VHF Marker Beacons must meet the performance requirements set forth in the “International Standards and Recommended Practices, Aeronautical Telecommunications, Part I, paragraphs 3.1.6 and 3.6.” (Annex 10 to the Convention on International Civil Aviation) except those portions that pertain to identification. Identification of a marker beacon (75 MHz) must be in accordance with “U.S. Standard Flight Inspection Manual,” § 219. (b) The facility must perform in accordance with recognized and accepted good electronic engineering practices for the desired service. The facility must be checked periodically during the in-service test evaluation period for calibration and stability. These tests and ground tests of the marker radiation characteristics must be conducted in accordance with the maintenance manual required by § 171.211(b). (c) It must be shown during ground inspection of the design features of the equipment that there will not be conditions that will allow unsafe operations because of component failure or deterioration. (d) Flight inspection to determine the adequacy of the facility's operational performance and compliance with applicable “Standards and Recommended Practices” are conducted in accordance with the “U.S. Standard Flight Inspection Manual.” The original test is made by the Federal Aviation Administration and later tests must be made under arrangements, satisfactory to the Federal Aviation Administration, that are made by the owner. | ||||
| 14:14:3.0.1.4.33.8.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.209 Installation requirements. | FAA | [Docket 10116, 35 FR 12716, Aug. 11, 1970, as amended by Amdt. 171-16, 56 FR 65665, Dec. 17, 1991] | (a) The facility must be installed according to accepted good engineering practices, applicable electric and safety codes, and Federal Communications Commission requirements. (b) The facility must have a reliable source of suitable primary power. (c) Dual transmitting equipment may be required, if applicable, to support certain IFR procedures. (d) At facilities within or immediately adjacent to controlled airspace and that are intended for use as instrument approach aids for an airport, there must be ground-air communications or reliable communications (at least a landline telephone) from the airport to the nearest Federal Aviation Administration air traffic control or communication facility. Compliance with this paragraph need not be shown at airports where an adjacent Federal Aviation Administration facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure. In addition, at low traffic density airports within or immediately adjacent to controlled airspace, and where extensive delays are not a factor, the requirements of this paragraph may be reduced to reliable communications (at least a landline telephone) from the airport to the nearest Federal Aviation Administration air traffic control or communications facility, if an adjacent Federal Aviation Administration facility can communicate with aircraft during the proposed instrument approach procedure, at least down to the minimum en route altitude for the controlled airspace area. | |||
| 14:14:3.0.1.4.33.8.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.211 Maintenance and operations requirements. | FAA | (a) The owner of the facility shall establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility shall meet at a minimum the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility, including proficiency in maintenance procedures and the use of specialized test equipment. (b) The owner must prepare, and obtain approval of, and each person who operates or maintains the facility shall comply with, an operations and maintenance manual that sets forth procedures for operations, preventive maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons only. (3) Federal Communications Commission's requirements for operating and maintenance personnel. (4) Posting of licenses and signs. (5) Relations between the facility and Federal Aviation Administration air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information (if applicable). (6) Notice to the Administrator of any suspension of service. (7) Detailed arrangements for maintenance, flight inspection, and servicing, stating the frequency of servicing. (8) Keeping of station logs and other technical reports, and the submission of reports required by § 171.213. (9) Monitoring of the facility, at least once each half hour, to assure continuous operation. (10) Inspections by U.S. personnel. (11) Names, addresses, and telephone numbers of persons to be notified in an emergency. (12) Shutdowns for routine maintenance and issue of “Notices to Airmen” for routine or emergency shutdowns (private use facilities may omit the “Notice to Airmen”). (13) Commissioning of the facility. (14) An acc… | ||||
| 14:14:3.0.1.4.33.8.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | H | Subpart H—VHF Marker Beacons | § 171.213 Reports. | FAA | [Docket 10116, 35 FR 12716, Aug. 11, 1970, as amended by Amdt. 171-10, 40 FR 36110, Aug. 19, 1975] | The owner of each facility to which this subpart applies shall make the following reports, at the times indicated, to the Federal Aviation Administration Regional Office for the area in which the facility is located: (a) Record of meter readings and adjustments (Form FAA-198). To be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of commissioning, with one copy to be kept in the permanent records of the facility and two copies to the appropriate Regional Office of the Federal Aviation Administration. The owner must revise the form after any major repair, modification, or retuning, to reflect an accurate record of facility operation and adjustment. (b) Facility maintenance log (FAA Form 6030-1). This form is a permanent record of all equipment malfunctioning met in maintaining the facility, including information on the kind of work and adjustments made, equipment failures, causes (if determined), and corrective action taken. The owner shall keep the original of each report at the facility and send a copy to the appropriate Regional Office of the Federal Aviation Administration at the end of the month in which it is prepared. (c) Radio equipment operation record (Form FAA-418), containing a complete record of meter readings, recorded on each scheduled visit to the facility. The owner shall keep the original of each month's record at the facility and send a copy of it to the appropriate Regional Office of the Federal Aviation Administration. | |||
| 14:14:3.0.1.4.33.9.3.1 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.251 Scope. | FAA | This subpart sets forth minimum requirements for the approval and operation of non-Federal Interim Standard Microwave Landing System (ISMLS) facilities that are to be involved in the approval of instrument flight rules and air traffic control procedures related to those facilities. | ||||
| 14:14:3.0.1.4.33.9.3.10 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.269 Marker beacon performance requirements. | FAA | ISMLS marker beacon equipment must meet the performance requirements prescribed in subpart H of this part. | ||||
| 14:14:3.0.1.4.33.9.3.11 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.271 Installation requirements. | FAA | [Docket 14120, 40 FR 36110, Aug. 19, 1975, as amended by Amdt. 171-16, 56 FR 65665, Dec. 17, 1991] | (a) The ISMLS facility must be permanent in nature, located, constructed, and installed according to accepted good engineering practices, applicable electric and safety codes, FCC licensing requirements, and paragraphs (a) and (c) of § 171.261. (b) The ISMLS facility must have a reliable source of suitable primary power, either from a power distribution system or locally generated. Adequate power capacity must be provided for the operation of test and working equipment of the ISMLS. (c) The ISMLS facility must have a continuously engaged or floating battery power source for the ground station for continued normal operation if the primary power fails. A trickle charge must be supplied to recharge the batteries during the period of available primary power. Upon loss and subsequent restoration of power, the batteries must be restored to full charge within 24 hours. When primary power is applied, the state of the battery charge may not affect the operation of the ISMLS ground station. The battery must permit continuation of normal operation for at least two hours under the normal operating conditions. The equipment must meet all specification requirements with or without batteries installed. (d) There must be a means for determining, from the ground, the performance of the equipment including antennae, both initially and periodically. (e) The facility must have, or be supplemented by, ground-air or landline communications services. At facilities within or immediately adjacent to controlled airspace and that are intended for use as instrument approach aids for an airport, there must be ground-air communications or reliable communications (at least a landline telephone) from the airport to the nearest Federal Aviation Administration air traffic control or communication facility. Compliance with this paragraph need not be shown at airports where an adjacent Federal Aviation Administration facility can communicate with aircraft on the ground at the airport and during the entire proposed instrument approach procedure.… | |||
| 14:14:3.0.1.4.33.9.3.12 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.273 Maintenance and operations requirements. | FAA | (a) The owner of the facility must establish an adequate maintenance system and provide qualified maintenance personnel to maintain the facility at the level attained at the time it was commissioned. Each person who maintains a facility must meet at least the Federal Communications Commission's licensing requirements and show that he has the special knowledge and skills needed to maintain the facility, including proficiency in maintenance procedures and the use of specialized test equipment. (b) In the event of out-of-tolerance conditions or malfunctions, as evidenced by receiving two successive pilot reports, the owner must close the facility be ceasing radiation, and issue a “Notice to Airman” (NOTAM) that the facility is out of service. (c) The owner must prepare, and obtain approval of, an operations and maintenance manual that sets forth mandatory procedures for operations, periodic maintenance, and emergency maintenance, including instructions on each of the following: (1) Physical security of the facility. (2) Maintenance and operations by authorized persons. (3) FCC licensing requirements for operations and maintenance personnel. (4) Posting of licenses and signs. (5) Relation between the facility and FAA air traffic control facilities, with a description of the boundaries of controlled airspace over or near the facility, instructions for relaying air traffic control instructions and information, if applicable, and instructions for the operation of an air traffic advisory service if the facility is located outside of controlled airspace. (6) Notice to the Administrator of any suspension of service. (7) Detailed and specific maintenance procedures and servicing guides stating the frequency of servicing. (8) Air-ground communications, if provided, expressly written or incorporating appropriate sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.275. (10) Monitoring of the ISMLS facility. (11) Inspections … | ||||
| 14:14:3.0.1.4.33.9.3.13 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.275 Reports. | FAA | The owner of the ISMLS facility or his maintenance representative must make the following reports at the indicated time to the appropriate FAA Regional Office where the facility is located. (a) Facility Equipment Performance and Adjustment Data ( FAA Form 198 ). The FAA Form 198 shall be filled out by the owner or his maintenance representative with the equipment adjustments and meter readings as of the time of facility commissioning. One copy must be kept in the permanent records of the facility and two copies must be sent to the appropriate FAA Regional Office. The owner or his maintenance representative must revise the FAA Form 198 data after any major repair, modernization, or retuning to reflect an accurate record of facility operation and adjustment. In the event the data are revised, the owner or his maintenance representative shall notify the appropriate FAA Regional Office of such revisions, and forward copies of the revisions to the appropriate FAA Regional Office. (b) Facility Maintenance Log ( FAA Form 6030 - 1 ). FAA Form 6030-1 is a permanent record of all the activities required to maintain the ISMLS facility. The entries must include all malfunctions met in maintaining the facility including information on the kind of work and adjustments made, equipment failures, causes (if determined) and corrective action taken. In addition, the entries must include completion of periodic maintenance required to maintain the facility. The owner or his maintenance representative must keep the original of each form at the facility and send a copy to the appropriate FAA Regional Office at the end of each month in which it is prepared. However, where an FAA approved remote monitoring system is installed which precludes the need for periodic maintenance visits to the facility, monthly reports from the remote monitoring system control point must be forwarded to the appropriate FAA Regional Office, and a hard copy retained at the control point. (c) Technical Performance Record ( FAA Form 418 ). FAA Form 418 c… | ||||
| 14:14:3.0.1.4.33.9.3.2 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.253 Definitions. | FAA | As used in this subpart: Angular displacement sensitivity (Glide Slope) means the ratio of measured DDM to the corresponding angular displacement from the appropriate reference line. Collocated ground station means the type of ground station which transmits two or more guidance signals simultaneously from a common location. Course line means the locus of points nearest to the runway centerline in any horizontal plane at which the DDM is zero. Course sector (full) means a sector in a horizontal plane containing the course line and limited by the loci of points nearest to the course line at which the DDM is 0.155. Course sector (half) means the sector in a horizontal plane containing the course line and limited by the loci of points nearest to the course line at which DDM is 0.0775. DDM means difference in depth of modulation. The percentage modulation depth of the larger signal minus the percentage modulation depth of the smaller signal, divided by 100. Displacement sensitivity (Localizer) means the ratio of measured DDM to the corresponding lateral displacement from the appropriate reference line. Facility Performance Category I—ISMLS means an ISMLS which provides guidance information from the coverage limit of the ISMLS to the point at which the localizer course line intersects the ISMLS glide path at a height of 200 feet or less above the horizontal plane containing the threshold. Glide path means that locus of points in the vertical plane containing the runway center line at which the DDM is zero, which, of all such loci, is the closest to the horizontal plane. Glide path angle (θ) means the angle between a straight line which represents the mean of the ISMLS glide path and the horizontal. Glide path sector (full) means the sector in the vertical plane containing the ISMLS glide path and limited by the loci of points nearest to the glide path at which the DDM is 0.175. The ISMLS glide path sector is located in the vertical plane containing the runway centerline, and is divided by the radi… | ||||
| 14:14:3.0.1.4.33.9.3.3 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.255 Requests for IFR procedures. | FAA | (a) Each person who requests an IFR procedure based on an ISMLS facility that he owns must submit the following information with that request: (1) A description of the facility and evidence that the equipment meets the performance requirements of §§ 171.259, 171.261, 171.263, 171.265, 171.267, and 171.269, and is installed in accordance with § 171.271. (2) A proposed procedure for operating the facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of § 171.273. (4) A statement of intent to meet the requirements of this subpart. (5) A showing that the ISMLS facility has an acceptable level of operational reliability, maintainability and acceptable standard of performance. Previous equivalent operational experience with a facility with identical design and operational characteristics will be considered in showing compliance with this paragraph. (b) After the FAA inspects and evaluates the ISMLS facility, it advises the owner of the results and of any required changes in the ISMLS facility or in the maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and operate the ISMLS facility for an inservice evaluation by the FAA. | ||||
| 14:14:3.0.1.4.33.9.3.4 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.257 Minimum requirements for approval. | FAA | (a) The following are the minimum requirements that must be met before the FAA approves an IFR procedure for a non-Federal ISMLS facility: (1) The performance of the ISMLS facility, as determined by flight and ground inspection conducted by the FAA, must meet the requirements of §§ 171.259, 171.261, 171.263, 171.265, 171.267, and 171.269. (2) The installation of the equipment must meet the requirements of § 171.271. (3) The owner must agree to operate and maintain the ISMLS facility in accordance with § 171.273. (4) The owner must agree to furnish periodic reports as set forth in § 171.275 and agree to allow the FAA to inspect the facility and its operation whenever necessary. (5) The owner must assure the FAA that he will not withdraw the ISMLS facility from service without the permission of the FAA. (6) The owner must bear all costs of meeting the requirements of this section and of any flight or ground inspection made before the ISMLS facility is commissioned, except that the FAA may bear certain costs subject to budgetary limitations and policy established by the Administrator. (b) If the applicant for approval meets the requirements of paragraph (a) of this section, the FAA approves the ISMLS facility for use in an IFR procedure. The approval is withdrawn at any time that the ISMLS facility does not continue to meet those requirements. In addition, the ISMLS facility may be de-commissioned whenever the frequency channel is needed for higher priority common system service. | ||||
| 14:14:3.0.1.4.33.9.3.5 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.259 Performance requirements: General. | FAA | (a) The ISMLS consists of the following basic components: (1) C-Band (5000 MHz-5030 MHz) localizer equipment, associated monitor system, and remote indicator equipment; (2) C-Band (5220 MHz-5250 MHz) glide path equipment, associated monitor system, and remote indicator equipment; (3) VHF marker beacons (75 MHz), associated monitor systems, and remote indicator equipment. (4) An ISMLS airborne receiver or a VHF/UHF ILS receiver modified to be capable of receiving the ISMLS signals. This modification requires the addition of a C-Band antenna, a converter unit, a microwave/ILS mode control, and a VHF/UHF receiver modification kit. (b) The electronic ground equipments in paragraph (a)(1), (2), and (3) of this section, must be designed to operate on a nominal 120/240 volt, 60 Hz, 3-wire single phase AC power source. (c) ISMLS ground equipment must meet the following service conditions: (1) AC line parameters, DC voltage, elevation, and duty: 120 V nominal value, 102 V to 138 V (±1 V).* 208 V nominal value, 177 V to 239 V (±2 V).* 240 V nominal value, 204 V to 276 V (±0.2 V).* AC line frequency (60 Hz), 57 Hz to 63 Hz (±0.2 Hz).* DC voltage (48 V), 44 V to 52 V (±0.5 V).* * Note: Where discrete values of the above frequency or voltages are specified for testing purposes, the tolerances given in parentheses indicated by an asterisk apply to the test instruments used to measure these parameters. Elevation, 0 to 10,000 ft. above sea level. Duty, continuous, unattended. 120 V nominal value, 102 V to 138 V (±1 V).* 208 V nominal value, 177 V to 239 V (±2 V).* 240 V nominal value, 204 V to 276 V (±0.2 V).* AC line frequency (60 Hz), 57 Hz to 63 Hz (±0.2 Hz).* DC voltage (48 V), 44 V to 52 V (±0.5 V).* * Note: Where discrete values of the above frequency or voltages are specified for testing purposes, the tolerances given in parentheses indicated by an asterisk apply to the test instruments used to measure these parameters. Elevation, 0 to 10,000 ft. above sea level. Duty, contin… | ||||
| 14:14:3.0.1.4.33.9.3.6 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.261 Localizer performance requirements. | FAA | This section prescribes the performance requirements for localizer equipment components of the ISMLS. (a) The localizer antenna system must: (1) Be located on the extension of the centerline of the runway at the stop end; (2) Be adjusted so that the course line be on a vertical plane containing the centerline of the runway served; (3) Have the minimum height necessary to comply with the coverage requirements prescribed in paragraph (j) of this section; (4) Be located at a distance from the stop end of the runway that is consistent with safe obstruction clearance practices; (5) Not obscure any light of the approach landing system; and (6) Be installed on frangible mounts or beyond the 1000′ light bar. (b) On runways where limited terrain prevents the localizer antennae from being positioned on the runway centerline extended, and the cost of the land fill or a tall tower antenna support is prohibitive, the localizer antenna array may be offset, including a collocated ground station, so that the course intercepts the centerline at a point determined by the amount of the angular offset and the glide path angle. If other than a runway centerline localizer is used, the criteria in subpart C of part 97 of this chapter is applicable. (c) At locations where two separate ISMLS facilities serve opposite ends of of a single runway, an interlock must ensure that only the facility serving the approach direction being used will radiate. (d) The radiation from the localizer antenna system must produce a composite field pattern which is pulse duration modulated, the time average equivalent to amplitude modulation by a 90 Hz and 150 Hz tone. The localizer station must transmit angular guidance information over a C-band microwave carrier on narrow, scanned antenna beams that are encoded to produce a modulation in space which, after averaging over several beam scans, is equivalent to the modulation used for conventional ILS as specified in subpart C of this part. The radiation field pattern must produce a course sector wit… | ||||
| 14:14:3.0.1.4.33.9.3.7 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.263 Localizer automatic monitor system. | FAA | (a) The ISMLS localizer equipment must provide an automatic monitor system that transmits a warning to designated local and remote control points when any of the following occurs: (1) A shift of the mean course line of the localizer from the runway centerline equivalent to more than 0.015 DDM at the ISMLS reference datum. (2) For localizers in which the basic functions are provided by the use of a single-frequency system, a reduction of power output to less than 50 percent of normal or a loss of ground station identification transmissions. (3) Changes of displacement sensitivity to a value differing by more than 17 percent from nominal value for the localizer. (4) Failure of any part of the monitor itself. Such failure must automatically produce the same results as the malfunctioning of the element being monitored. (b) Within 10 seconds of the occurrence of any of the conditions prescribed in paragraph (a) of this section, including periods of zero radiation, localizer signal radiation must cease or the navigation and identification components must be removed. | ||||
| 14:14:3.0.1.4.33.9.3.8 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.265 Glide path performance requirements. | FAA | [Docket 14120, 40 FR 36110, Aug. 19, 1975; 40 FR 41093, Sept. 5, 1975; 40 FR 43719, Sept. 23, 1975] | This section prescribes the performance requirements for glide path equipment components of the ISMLS. These requirements are based on the assumption that the aircraft is heading directly toward the facility. (a) The glide slope antenna system must be located near the approach end of the runway, and the equipment must be adjusted so that the vertical path line will be in a sloping horizontal plane containing the centerline of the runway being served, and satisfy the coverage requirements prescribed in paragraph (g) of this section. For the purpose of obstacle clearance, location of the glide slope antenna system must be in accordance with the criteria specified in subpart C of part 97 of this chapter. (b) The radiation from the glide path antenna system must produce a composite field pattern which is pulse duration modulated by a 90 Hz and a 150 Hz tone, which is the time average equivalent to amplitude modulation. The pattern must be arranged to provide a straight line descent path in the vertical plane containing the centerline of the runway, with the 150 Hz tone predominating below the path and the 90 Hz tone predominating above the path to at least an angle equal to 1.752θ. As used in this section theta (θ), denotes the nominal glide path angle. The glide path angle must be adjusted and maintained within 0.075θ. (c) The glide path equipment must be capable of producing a radiated glide path from 3 to 9 degrees with respect to the horizontal. However, ISMLS glide path angles in excess of 3 degrees may be used to satisfy instrument approach procedures or to overcome an obstruction clearance problem, only in accordance with the criteria specified in subpart C of part 97 of this chapter. (d) The downward extended straight portion of the ISMLS glide path must pass through the ISMLS reference datum at a height ensuring safe guidance over obstructions and safe and efficient use of the runway served. The height of the ISMLS reference datum must be in accordance with subpart C of part 97 of this chapter. (e) The … | |||
| 14:14:3.0.1.4.33.9.3.9 | 14 | Aeronautics and Space | I | J | 171 | PART 171—NON-FEDERAL NAVIGATION FACILITIES | I | Subpart I—Interim Standard Microwave Landing System (ISMLS) | § 171.267 Glide path automatic monitor system. | FAA | (a) The ISMLS glide path equipment must provide an automatic monitor system that transmits a warning to designated local and remote control points when any of the following occurs: (1) A shift of the mean ISMLS glide path angle equivalent to more than 0.075θ. (2) For glide paths in which the basic functions are provided by the use of a single frequency system, a reduction of power output to less than 50 percent. (3) A change of the angle between the glide path and the line below the glide path (150 Hz predominating), at which a DDM of 0.0875 is realized by more than ±0.0375θ. (4) Lowering of the line beneath the ISMLS glide path at which a DDM of 0.0875 is realized to less than 0.75θ from the horizontal. (5) Failure of any part of the monitor itself. Such failure must automatically produce the same results as the malfunctioning of the element being monitored. (b) At glide path facilities where the selected nominal angular displacement sensitivity corresponds to an angle below the ISMLS glide path, which is close to or at the maximum limits specified, an adjustment to the monitor operating limits may be made to protect against sector deviations below 0.75θ from the horizontal. (c) Within 10 seconds of the occurrence of any of the conditions prescribed in paragraph (a) of this section, including periods of zero radiation, glide path signal radiation must cease. |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);