cfr_sections
Data license: Public Domain (U.S. Government data) · Data source: Federal Register API & Regulations.gov API
16 rows where agency = "NHTSA" and part_number = 575 sorted by section_id
This data as json, CSV (advanced)
Suggested facets: subpart, subpart_name, amendment_citations
| section_id ▼ | title_number | title_name | chapter | subchapter | part_number | part_name | subpart | subpart_name | section_number | section_heading | agency | authority | source_citation | amendment_citations | full_text |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 49:49:7.1.1.1.4.1.1.1 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.1 Scope. | NHTSA | [75 FR 15944, Mar. 30, 2010] | This part contains National Highway Traffic Safety Administration regulations relating to consumer information. | ||||
| 49:49:7.1.1.1.4.1.1.2 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.2 Definitions. | NHTSA | [35 FR 6867, Apr. 30, 1970, as amended at 38 FR 5339, Feb. 28, 1973; 48 FR 44081, Sept. 27, 1983; 54 FR 48749, Nov. 27, 1989; 64 FR 27924, May 24, 1999; 75 FR 15944, Mar. 30, 2010] | (a) Statutory definitions. (1) All terms used in this part, subject to paragraph (a)(2) of this section, that are defined in 49 U.S.C. 30102, are used as defined therein. (2) All terms used in Subpart D of this part that are defined in 15 U.S.C. 1231, are used as defined therein. (b) Motor Vehicle Safety Standard definitions. Unless otherwise indicated, all terms used in this part that are defined in the Motor Vehicle Safety Standards, part 571 of this subchapter (hereinafter “the Standards”), are used as defined in the Standards without regard to the applicability of a standard in which a definition is contained. (c) Definitions used in this part. Owners manual means the document which contains the manufacturers comprehensive vehicle operating and maintenance instructions, and which is intended to remain with the vehicle for the life of the vehicle. Skid number means the frictional resistance measured in accordance with ASTM E 274 (incorporated by reference, see § 575.3) at 40 miles per hour, omitting water delivery as specified in paragraph 7.1 of ASTM E 274 (incorporated by reference, see § 575.3). | ||||
| 49:49:7.1.1.1.4.1.1.3 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.3 Matter incorporated by reference. | NHTSA | [75 FR 15944, Mar. 30, 2010, as amended at 76 FR 79121, Dec. 21, 2011; 87 FR 34811, June 8, 2022] | (a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the National Highway Traffic Safety Administration (NHTSA) must publish notice of change in the Federal Register and the material must be available to the public. All approved material is available for inspection at the NHTSA Technical Information Services Reading Room ( http://www.nhtsa.dot.gov/cars/problems/trd/ ), 1200 New Jersey Avenue, SE., Washington, DC 20590 (888-327-4236), and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html. All approved material is also available from the sources listed below. If you experience difficulty obtaining the standards referenced below, contact NHTSA's Office of Rulemaking, 1200 New Jersey Avenue, SE., Washington, DC 20590, phone number: (202) 366-0846. (b) International Organization for Standardization (ISO), 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland, + 41 22 749 01 11, http://www.iso.org/iso/home.htm. All ISO materials are also available from the U.S. ISO member, American National Standards Institute (ANSI), 25 West 43rd Street, Fourth Floor, New York, NY 10036-7417, 212-642-4900, http://www.ansi.org/. (1) International Organization for Standardization (ISO), ISO 28580:2009(E) (“ISO 28580”), “Passenger car, truck and bus tyres—Methods of measuring rolling resistance—Single point test and correlation of measurement results,” First edition (July 1, 2009), IBR approved for § 575.106. (2) [Reserved] (c) American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, 610-832-9500, http://www.astm.org/. (1) ASTM E 501-08 (“ASTM E 501”), “Standard Specification for Standard Rib Tire for Pavement … | ||||
| 49:49:7.1.1.1.4.1.1.4 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.4 Application. | NHTSA | [39 FR 1039, Jan. 4, 1974] | (a) General. Except as provided in paragraphs (b) through (d) of this section, each section set forth in subpart B of this part applies according to its terms to motor vehicles and tires manufactured after the effective date indicated. (b) Military vehicles. This part does not apply to motor vehicles or tires sold directly to the Armed Forces of the United States in conformity with contractual specifications. (c) Export. This part does not apply to motor vehicles or tires intended solely for export and so labeled or tagged. (d) Import. This part does not apply to motor vehicles or tires imported for purposes other than resale. | ||||
| 49:49:7.1.1.1.4.1.1.5 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.5 Separability. | NHTSA | If any section established in this part or its application to any person or circumstances is held invalid, the remainder of the part and the application of that section to other persons or circumstances is not affected thereby. | |||||
| 49:49:7.1.1.1.4.1.1.6 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.6 Requirements. | NHTSA | [39 FR 1039, Jan. 4, 1974, as amended at 41 FR 13923, Apr. 1, 1976; 45 FR 47153, July 14, 1980; 47 FR 7258, Feb. 18, 1982; 52 FR 27810, July 24, 1987; 54 FR 48749, Nov. 27, 1989; 64 FR 27924, May 24, 1999; 67 FR 69631, Nov. 18, 2002; 69 FR 31320, June 3, 2004; 70 FR 35557, June 21, 2005] | (a)(1) At the time a motor vehicle is delivered to the first purchaser for purposes other than resale, the manufacturer of that vehicle shall provide the Uniform Tire Quality Grading information required by § 575.104(d)(1)(iii) in the owner's manual of each vehicle it produces. The vehicle manufacturer shall also provide to the purchaser, in writing and in the English language, the information specified in § 575.103 of this part that is applicable to that vehicle. The information provided with a vehicle may contain more than one table, but the document must either: (i) Clearly and unconditionally indicate which of the tables apply to the vehicle with which it is provided, or (ii) Contain a statement on its cover referring the reader to the vehicle certification label for specific information concerning which of the tables apply to that vehicle. If the manufacturer chooses option in paragraph (a)(1)(ii) of this section, the vehicle certification label shall include such specific information. Model P. Regular cab, 135 in. (3,430 mm) wheel base—Table 1. Model P. Club cab, 142 in. (3,607 mm) wheel base—Table 2. Model Q—Table 3.” (2)(i) At the time a motor vehicle manufactured on or after September 1, 1990 is delivered to the first purchaser for purposes other than resale, the manufacturer shall provide to the purchaser, in writing in the English language and not less than 10 point type, the following statement in the owner's manual, or, if there is no owner's manual, on a one-page document: If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying [INSERT NAME OF MANUFACTURER]. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or [INSERT … | ||||
| 49:49:7.1.1.1.4.1.1.7 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | A | Subpart A—Regulations Issued Under Section 112(d) of the National Traffic and Motor Vehicle Safety Act; General | § 575.7 Special vehicles. | NHTSA | [40 FR 11727, Mar. 13, 1975] | A manufacturer who produces vehicles having a configuration not available for purchase by the general public need not make available to ineligible purchasers, pursuant to § 575.6(c), the information for those vehicles specified in subpart B of this part, and shall identify those vehicles when furnishing the information required by § 575.6(d). | ||||
| 49:49:7.1.1.1.4.2.1.1 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | B | Subpart B—Regulations; Consumer Information Items | §§ 575.101-575.102 [Reserved] | NHTSA | ||||||
| 49:49:7.1.1.1.4.2.1.2 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | B | Subpart B—Regulations; Consumer Information Items | § 575.103 Truck-camper loading. | NHTSA | [61 FR 36657, July 12, 1996, as amended at 70 FR 39970, July 12, 2005] | (a) Scope. This section requires manufacturers of slide-in campers to affix to each camper a label that contains information relating to identification and proper loading of the camper and to provide more detailed loading information in the owner's manual. This section also requires manufacturers of trucks that would accommodate slide-in campers to specify the cargo weight ratings and the longitudinal limits within which the center of gravity for the cargo weight rating should be located. (b) Purpose. The purpose of this section is to provide information that can be used to reduce overloading and improper load placement in truck-camper combinations and unsafe truck- camper matching in order to prevent accidents resulting from the adverse effects of these conditions on vehicle steering and braking. (c) Application. This section applies to slide-in campers and to trucks that are capable of accommodating slide- in campers. (d) Definitions. Camper means a structure designed to be mounted in the cargo area of a truck, or attached to an incomplete vehicle with motive power, for the purpose of providing shelter for persons. Cargo Weight Rating means the value specified by the manufacturer as the cargo-carrying capacity, in pounds or kilograms, of a vehicle, exclusive of the weight of occupants in designated seating positions, computed as 68 kilograms or 150 pounds times the number of designated seating positions. Slide-in Camper means a camper having a roof, floor, and sides, designed to be mounted on and removable from the cargo area of a truck by the user. (e) Requirements —(1) Slide-in Camper —(i) Labels. Each slide-in camper shall have permanently affixed to it, in such a manner that it cannot be removed without defacing or destroying it, and in a plainly visible location on an exterior rear surface other than the roof, steps, or bumper extension, a label containing the following information in the English language lettered in block capitals and numerals not less than 2.4 millimeters (three thir… | ||||
| 49:49:7.1.1.1.4.2.1.3 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | B | Subpart B—Regulations; Consumer Information Items | § 575.104 Uniform tire quality grading standards. | NHTSA | [43 FR 30549, July 17, 1978] | (a) Scope. This section requires motor vehicle and tire manufacturers and tire brand name owners to provide information indicating the relative performance of passenger car tires in the areas of treadwear, traction, and temperature resistance. (b) Purpose. The purpose of this section is to aid the consumer in making an informed choice in the purchase of passenger car tires. (c) Application. (1) This section applies to new pneumatic tires for use on passenger cars. However, this section does not apply to deep tread, winter-type snow tires, space-saver or temporary use spare tires, tires with nominal rim diameters of 12 inches or less, or to limited production tires as defined in paragraph (c)(2) of this section. (2) “Limited production tire” means a tire meeting all of the following criteria, as applicable: (i) The annual domestic production or importation into the United States by the tire's manufacturer of tires of the same design and size as the tire does not exceed 15,000 tires; (ii) In the case of a tire marketed under a brand name, the annual domestic purchase or importation into the United States by a brand name owner of tires of the same design and size as the tire does not exceed 15,000 tires; (iii) The tire's size was not listed as a vehicle manufacturer's recommended tire size designation for a new motor vehicle produced in or imported into the United States in quantities greater than 10,000 during the calendar year preceding the year of the tire's manufacture; and (iv) The total annual domestic production or importation into the United States by the tire's manufacturer, and in the case of a tire marketed under a brand name, the total annual domestic purchase or purchase for importation into the United States by the tire's brand name owner, of tires meeting the criteria of paragraphs (c)(2) (i), (ii), and (iii) of this section, does not exceed 35,000 tires. Tire design is the combination of general structural characteristics, materials, and tread pattern, but does include cosmetic, identif… | ||||
| 49:49:7.1.1.1.4.2.1.4 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | B | Subpart B—Regulations; Consumer Information Items | § 575.105 Vehicle rollover. | NHTSA | [64 FR 11733, Mar. 9, 1999, as amended at 64 FR 47123, Aug. 30, 1999] | (a) Purpose and scope. This section requires manufacturers of utility vehicles to alert the drivers of those vehicles that they have a higher possibility of rollover than other vehicle types and to advise them of steps that can be taken to reduce the possibility of rollover and/or to reduce the likelihood of injury in a rollover. (b) Application. This section applies to utility vehicles. (c) Definitions. Utility vehicles means multipurpose passenger vehicles (other than those which are passenger car derivatives) which have a wheelbase of 110 inches or less and special features for occasional off-road operation. (d) Required information —(1) Rollover Warning Label. (i) Except as provided in paragraph (d)(2) of this section, each vehicle must have a label permanently affixed to either side of the sun visor, at the manufacturer's option, at the driver's seating position. The label must conform in content, form and sequence to the label shown in Figure 1 of this section, and must comply with the following requirements: (A) The heading area must be yellow, with the text and the alert symbol in black. (B) The message area must be white with black text. (C) The pictograms must be black with a white background. (D) The label must be appropriately sized so that it is legible, visible and prominent to the driver. (ii) Vehicles manufactured on or after September 1, 1999 and before September 1, 2000. When the rollover warning label required by paragraph (d)(1)(i) of this section and the air bag warning label required by paragraph S4.5.1(b) of 49 CFR 571.208 are affixed to the same side of the driver side sun visor, either: (A) The rollover warning label must be affixed to the right (as viewed from the driver's seat) of the air bag warning label and the labels may not be contiguous; or (B) The pictogram of the air bag warning label must be separated from the pictograms of the rollover warning label by text, and ( 1 ) The labels must be located such that the shortest distance from any of the lettering or… | ||||
| 49:49:7.1.1.1.4.2.1.5 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | B | Subpart B—Regulations; Consumer Information Items | § 575.106 Tire fuel efficiency consumer information program. | NHTSA | [75 FR 15944, Mar. 30, 2010, as amended at 76 FR 79121, Dec. 21, 2011] | (a) Scope. This section requires tire manufacturers, tire brand name owners, and tire retailers to provide information indicating the relative performance of replacement passenger car tires in the areas of fuel efficiency, safety, and durability. (b) Purpose. The purpose of this section is to aid consumers in making better educated choices in the purchase of passenger car tires. (c) Application. This section applies to replacement passenger car tires. However, this section does not apply to light truck tires, deep tread, winter-type snow tires, space-saver or temporary use spare tires, tires with nominal rim diameters of 12 inches or less, or to limited production tires as defined in § 575.104(c)(2). Tire manufacturers may comply with the requirements in this § 575.106 as an alternative to complying with the requirements in § 575.104(d)(1)(i)(A) and (B). (d) Definitions. (1) All terms used in this section that are defined in Section 32101 of Title 49, United States Code, are used as defined therein. (2) As used in this section: Brand name owner means a person, other than a tire manufacturer, who owns or has the right to control the brand name of a tire or a person who licenses another to purchase tires from a tire manufacturer bearing the licensor's brand name. CT means a pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that encloses the rim flanges inside the air cavity of the tire. Dealer means a person selling and distributing new motor vehicles or motor vehicle equipment primarily to purchasers that in good faith purchase the vehicle or equipment other than for resale. Distributor means a person primarily selling and distributing motor vehicles or motor vehicle equipment for resale. Lab alignment tires or LATs means the reference tires which the reference lab will test to be used to align other rolling resistance machines with the refer… | ||||
| 49:49:7.1.1.1.4.3.1.1 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | C | Subpart C—Transportation Recall Enhancement, Accountability, and Documentation Act; Consumer Information | § 575.201 Child restraint performance. | NHTSA | [67 FR 67494, Nov. 5, 2002] | The National Highway Traffic Safety Administration has established a program for rating the performance of child restraints. The agency makes the information developed under this rating program available through a variety of means, including postings on its Web site, http://www.nhtsa.dot.gov. | ||||
| 49:49:7.1.1.1.4.4.1.1 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | D | Subpart D—Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU); Consumer Information | § 575.301 Vehicle labeling of safety rating information (applicable unless a vehicle is subject to § 575.302). | NHTSA | [71 FR 53585, Sept. 12, 2006, as amended at 72 FR 45176, Aug. 13, 2007; 76 FR 45466, July 29, 2011] | (a) Purpose and Scope. The purpose of this section is to aid potential purchasers in the selection of new passenger motor vehicles by providing them with safety rating information developed by NHTSA in its New Car Assessment Program (NCAP) testing. Manufacturers of passenger motor vehicles described in paragraph (b) of this section are required to include this information on the Monroney label. Although NHTSA also makes the information available through means such as postings at http://www.safercar.gov and http://www.nhtsa.dot.gov, the additional Monroney label information is intended to provide consumers with relevant information at the point of sale. (b) Application. This section applies to automobiles with a GVWR of 10,000 pounds or less, manufactured on or after September 1, 2007, that are required by the Automobile Information Disclosure Act, 15 U.S.C. 1231-1233, to have price sticker labels (Monroney labels), e.g., passenger vehicles, station wagons, passenger vans, and sport utility vehicles, except for vehicles that are subject to § 575.302. Model Year 2012 or later vehicles manufactured prior to January 31, 2012 may be labeled according to the provisions of § 575.302 instead of this section provided the ratings placed on the safety rating label are derived from vehicle testing conducted by the National Highway Traffic Safety Administration under the enhanced NCAP testing and rating program. (c) Definitions. (1) Monroney label means the label placed on new automobiles with the manufacturer's suggested retail price and other consumer information, as specified at 15 U.S.C. 1231-1233. (2) Safety rating label means the label with NCAP safety rating information, as specified at 15 U.S.C. 1232(g). The safety rating label is part of the Monroney label. (d) Required Label. (1) Except as specified in paragraph (f) of this section, each vehicle must have a safety rating label that is part of its Monroney label, meets the requirements specified in paragraph (e) of this section, and conforms in co… | ||||
| 49:49:7.1.1.1.4.4.1.2 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | D | Subpart D—Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU); Consumer Information | § 575.302 Vehicle labeling of safety rating information (compliance required for model year 2012 and later vehicles manufactured on or after January 31, 2012). | NHTSA | [76 FR 45466, July 29, 2011, as amended at 76 FR 74724, Dec. 1, 2011] | (a) Purpose and scope. The purpose of this section is to aid potential purchasers in the selection of new passenger motor vehicles by providing them with safety rating information developed by NHTSA in its New Car Assessment Program (NCAP) testing. Manufacturers of passenger motor vehicles described in paragraph (b) of this section are required to include this information on the Monroney label. Although NHTSA also makes the information available through means such as postings at http://www.safercar.gov and http://www.nhtsa.dot.gov, the additional Monroney label information is intended to provide consumers with relevant information at the point of sale. (b) Application. This section applies to automobiles with a GVWR of 10,000 pounds or less, manufactured on or after January 31, 2012 that have vehicle identification numbers that identify the vehicles to be model year 2012 or later and that are required by the Automobile Information Disclosure Act, 15 U.S.C. 1231-1233, to have price sticker labels (Monroney labels), (e.g., passenger vehicles, station wagons, passenger vans, and sport utility vehicles). Model Year 2012 or later vehicles manufactured prior to January 31, 2012, at the manufacturer's option, may be labeled according to the provisions of this § 575.302 provided the ratings placed on the safety rating label are derived from vehicle testing conducted by the National Highway Traffic Safety Administration under the enhanced NCAP testing and rating program. (c) Definitions. (1) Monroney label means the label placed on new automobiles with the manufacturer's suggested retail price and other consumer information, as specified at 15 U.S.C. 1231-1233. (2) Safety rating label means the label with NCAP safety rating information, as specified at 15 U.S.C. 1232(g). The safety rating label is part of the Monroney label. (d) Required label. (1) Except as specified in paragraph (f) of this section, each vehicle must have a safety rating label that is part of its Monroney label, meets the requirement… | ||||
| 49:49:7.1.1.1.4.5.1.1 | 49 | Transportation | V | 575 | PART 575—CONSUMER INFORMATION | E | Subpart E—Energy Independence and Security Act; Consumer Information | § 575.401 Vehicle labeling of fuel economy, greenhouse gas, and other pollutant emissions information. | NHTSA | (a) Purpose and scope. The purpose of this section is to aid potential purchasers in the selection of new passenger cars and light trucks by providing them with information about vehicles' performance in terms of fuel economy, greenhouse gas (GHG), and other air pollutant emissions. Manufacturers of passenger cars and light trucks are required to include this information on the label described in this section. Although this information will also be available through means such as postings at http://www.fueleconomy.gov, the additional label information is intended to provide consumers with this information at the point of sale, and to help them compare between vehicles. (b) Application. This section applies to passenger cars and light trucks manufactured in model year 2013 and later. Manufacturers may optionally comply with this section during model year 2012. (c) Definitions. (1) Data element means a piece of information required or permitted to be included on the fuel economy and environment label. (2) Fuel economy and environment label means the label with information about automobile performance in terms of fuel economy, greenhouse gases, and other emissions and with rating systems for fuel economy, greenhouse gases, and other emissions that also indicate the automobile(s) with the highest fuel economy and lowest greenhouse gas emissions, as specified at 49 U.S.C. 32908(g). (3) Miles per gasoline gallon equivalent (MPGe) is a measure of distance traveled per unit of energy consumed, and functions as a recognizable equivalent to, e.g., kilowatt-hours per mile (kW-hr/mile). (4) Monroney label means the label placed on new automobiles with the manufacturer's suggested retail price and other consumer information, as specified at 15 U.S.C. 1231-1233 (also known as the “Automobile Information Disclosure Act label”). (5) Other air pollutants or other emissions means those tailpipe emissions, other than carbon dioxide (CO 2 ), for which manufacturers must provide EPA with emissions rates for … |
Advanced export
JSON shape: default, array, newline-delimited, object
CREATE TABLE cfr_sections (
section_id TEXT PRIMARY KEY,
title_number INTEGER,
title_name TEXT,
chapter TEXT,
subchapter TEXT,
part_number TEXT,
part_name TEXT,
subpart TEXT,
subpart_name TEXT,
section_number TEXT,
section_heading TEXT,
agency TEXT,
authority TEXT,
source_citation TEXT,
amendment_citations TEXT,
full_text TEXT
);
CREATE INDEX idx_cfr_title ON cfr_sections(title_number);
CREATE INDEX idx_cfr_part ON cfr_sections(part_number);
CREATE INDEX idx_cfr_agency ON cfr_sections(agency);