{"database": "openregs", "table": "cfr_sections", "is_view": false, "human_description_en": "where part_number = 97 and title_number = 14 sorted by section_id", "rows": [["14:14:2.0.1.3.15.1.9.1", 14, "Aeronautics and Space", "I", "F", "97", "PART 97\u2014STANDARD INSTRUMENT PROCEDURES", "A", "Subpart A\u2014General", "", "\u00a7 97.1 Applicability.", "FAA", "", "", "[Docket FAA-2002-14002, 72 FR 31679, June 7, 2007, as amended by FAA-2023-1275, Amdt. 97-1340, 89 FR 92486, Nov. 21, 2024]", "(a) This part prescribes standard instrument approach procedures to civil airports in the United States and the weather minimums that apply to landings under IFR at those airports.\n\n(b) This part also prescribes obstacle departure procedures (ODPs) for certain civil airports in the United States and the weather minimums that apply to takeoffs under IFR at civil airports in the United States.\n\n(c) Additional applicability of copter procedures for powered-lift is set forth in part 194 of this chapter."], ["14:14:2.0.1.3.15.1.9.2", 14, "Aeronautics and Space", "I", "F", "97", "PART 97\u2014STANDARD INSTRUMENT PROCEDURES", "A", "Subpart A\u2014General", "", "\u00a7 97.3 Symbols and terms used in procedures.", "FAA", "", "", "[Docket FAA-2002-14002, 72 FR 31679, June 7, 2007]", "As used in the standard instrument procedures prescribed in this part\u2014\n\nAircraft approach category  means a grouping of aircraft based on a speed of VREF, if specified, or if VREF is not specified, 1.3 V so  at the maximum certificated landing weight. VREF, V so , and the maximum certificated landing weight are those values as established for the aircraft by the certification authority of the country of registry. The categories are as follows\u2014\n\n(1) Category A: Speed less than 91 knots.\n\n(2) Category B: Speed 91 knots or more but less than 121 knots.\n\n(3) Category C: Speed 121 knots or more but less than 141 knots.\n\n(4) Category D: Speed 141 knots or more but less than 166 knots.\n\n(5) Category E: Speed 166 knots or more.\n\nApproach procedure segments  for which altitudes (minimum altitudes, unless otherwise specified) and paths are prescribed in procedures, are as follows\u2014\n\n(1) Initial approach is the segment between the initial approach fix and the intermediate fix or the point where the aircraft is established on the intermediate course or final approach course.\n\n(2) Initial approach altitude is the altitude (or altitudes, in high altitude procedure) prescribed for the initial approach segment of an instrument approach.\n\n(3) Intermediate approach is the segment between the intermediate fix or point and the final approach fix.\n\n(4) Final approach is the segment between the final approach fix or point and the runway, airport, or missed approach point.\n\n(5) Missed approach is the segment between the missed approach point, or point of arrival at decision altitude or decision height (DA/DH), and the missed approach fix at the prescribed altitude.\n\nCeiling  means the minimum ceiling, expressed in feet above the airport elevation, required for takeoff or required for designating an airport as an alternate airport.\n\nCopter procedures  means helicopter procedures, with applicable minimums as prescribed in \u00a7 97.35. Helicopters may also use other procedures prescribed in subpart C of this part and may use the Category A minimum descent altitude (MDA), or decision altitude or decision height (DA/DH). For other than \u201ccopter-only\u201d approaches, the required visibility minimum for Category I approaches may be reduced to one-half the published visibility minimum for Category A aircraft, but in no case may it be reduced to less than one-quarter mile prevailing visibility, or, if reported, 1,200 feet RVR. Reduction of visibility minima on Category II instrument approach procedures is prohibited.\n\nFAF  means final approach fix.\n\nHAA  means height above airport and is expressed in feet.\n\nHAL  means height above landing and is the height of the DA/MDA above a designated helicopter landing area elevation used for helicopter instrument approach procedures and is expressed in feet.\n\nHAS  means height above the surface and is the height of the DA/MDA above the highest terrain/surface within a 5,200-foot radius of the missed approach point used in helicopter instrument approach procedures and is expressed in feet above ground level (AGL).\n\nHAT  means height above touchdown.\n\nHCH  means helipoint crossing height and is the computed height of the vertical guidance path above the helipoint elevation at the helipoint expressed in feet.\n\nHelipoint  means the aiming point for the final approach course. It is normally the center point of the touchdown and lift-off area (TLOF).\n\nHold in lieu of PT  means a holding pattern established under applicable FAA criteria, and used in lieu of a procedure turn to execute a course reversal.\n\nMAP  means missed approach point.\n\nMore than 65 knots  means an aircraft that has a stalling speed of more than 65 knots (as established in an approved flight manual) at maximum certificated landing weight with full flaps, landing gear extended, and power off.\n\nMSA  means minimum safe altitude, expressed in feet above mean sea level, depicted on an approach chart that provides at least 1,000 feet of obstacle clearance for emergency use within a certain distance from the specified navigation facility or fix.\n\nNA  means not authorized.\n\nNOPT  means no procedure turn required. Altitude prescribed applies only if procedure turn is not executed.\n\nProcedure turn  means the maneuver prescribed when it is necessary to reverse direction to establish the aircraft on an intermediate or final approach course. The outbound course, direction of turn, distance within which the turn must be completed, and minimum altitude are specified in the procedure. However, the point at which the turn may be begun, and the type and rate of turn, is left to the discretion of the pilot.\n\nRA  means radio altimeter setting height.\n\nRVV  means runway visibility value.\n\nSIAP  means standard instrument approach procedure.\n\n65 knots or less  means an aircraft that has a stalling speed of 65 knots or less (as established in an approved flight manual) at maximum certificated landing weight with full flaps, landing gear extended, and power off.\n\nT  means nonstandard takeoff minimums or specified departure routes/procedures or both.\n\nTDZ  means touchdown zone.\n\nVisibility minimum  means the minimum visibility specified for approach, landing, or takeoff, expressed in statute miles, or in feet where RVR is reported."], ["14:14:2.0.1.3.15.1.9.3", 14, "Aeronautics and Space", "I", "F", "97", "PART 97\u2014STANDARD INSTRUMENT PROCEDURES", "A", "Subpart A\u2014General", "", "\u00a7 97.5 Bearings, courses, tracks, headings, radials, miles.", "FAA", "", "", "[Docket 561, 32 FR 13912, Oct. 6, 1967, as amended by Amdt. 97-1336, 72 FR 31680, June 7, 2007]", "(a) All bearings, courses, tracks, headings, and radials in this part are magnetic, unless otherwise designated.\n\n(b) RVR values are stated in feet. Other visibility values are stated in statute miles. All other mileages are stated in nautical miles."], ["14:14:2.0.1.3.15.2.9.1", 14, "Aeronautics and Space", "I", "F", "97", "PART 97\u2014STANDARD INSTRUMENT PROCEDURES", "B", "Subpart B\u2014Procedures", "", "\u00a7 97.10 [Reserved]", "FAA", "", "", "", ""], ["14:14:2.0.1.3.15.3.9.1", 14, "Aeronautics and Space", "I", "F", "97", "PART 97\u2014STANDARD INSTRUMENT PROCEDURES", "C", "Subpart C\u2014TERPS Procedures", "", "\u00a7 97.20 General.", "FAA", "", "", "[Docket FAA-2002-14002, 72 FR 31680, June 7, 2007, as amended by Docket FAA-2018-0119, Amdt. 97-1338, 83 FR 9172, Mar. 5, 2018; Docket FAA-2022-1355, Amdt. 97-1339, 87 FR 75846, Dec. 9, 2022]", "(a) This subpart prescribes standard instrument approach procedures and takeoff minimums and obstacle departure procedures (ODPs) based on the criteria contained in FAA Order 8260.3, U.S. Standard for Terminal Instrument Procedures (TERPs), and other related Orders in the 8260 series that also address instrument procedure design criteria.\n\n(b) Standard instrument approach procedures and associated supporting data adopted by the FAA are documented on FAA Forms 8260-3, 8260-4, 8260-5. Takeoff minimums and obstacle departure procedures (ODPs) are documented on FAA Form 8260-15A. These forms are incorporated by reference. The Director of the Federal Register approved this incorporation by reference pursuant to 5 U.S.C. 552(a) and 1 CFR part 51. The standard instrument approach procedures and takeoff minimums and obstacle departure procedures (ODPs) are available for examination at the U.S. Department of Transportation, Docket Operations, 1200 New Jersey Avenue SE, West Building Ground Floor, Room W12-140, Washington, DC 20590, and at Aeronautical Information Services, 1305 East-West Highway, Silver Spring, MD 20910, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email:  fedreg.legal@nara.gov , or go to  http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.\n\n(c) Standard instrument approach procedures and takeoff minimums and obstacle departure procedures (ODPs) are depicted on aeronautical charts published by the FAA. These charts are available from the FAA at  https://www.faa.gov/air_traffic/flight_info/aeronav/digital_products/."]], "truncated": false, "filtered_table_rows_count": 5, "expanded_columns": [], "expandable_columns": [], "columns": ["section_id", "title_number", "title_name", "chapter", "subchapter", "part_number", "part_name", "subpart", "subpart_name", "section_number", "section_heading", "agency", "authority", "source_citation", "amendment_citations", "full_text"], "primary_keys": ["section_id"], "units": {}, "query": {"sql": "select section_id, title_number, title_name, chapter, subchapter, part_number, part_name, subpart, subpart_name, section_number, section_heading, agency, authority, source_citation, amendment_citations, full_text from cfr_sections where \"part_number\" = :p0 and \"title_number\" = :p1 order by section_id limit 101", "params": {"p0": "97", "p1": "14"}}, "facet_results": {"title_number": {"name": "title_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=97&title_number=14", "results": [{"value": 14, "label": 14, "count": 5, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=97", "selected": true}], "truncated": false}, "agency": {"name": "agency", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=97&title_number=14", "results": [{"value": "FAA", "label": "FAA", "count": 5, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=97&title_number=14&agency=FAA", "selected": false}], "truncated": false}, "part_number": {"name": "part_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=97&title_number=14", "results": [{"value": "97", "label": "97", "count": 5, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?title_number=14", "selected": true}], "truncated": false}}, "suggested_facets": [{"name": "subpart", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=97&title_number=14&_facet=subpart"}, {"name": "subpart_name", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=97&title_number=14&_facet=subpart_name"}], "next": null, "next_url": null, "private": false, "allow_execute_sql": true, "query_ms": 953.6438529612496, "source": "Federal Register API & Regulations.gov API", "source_url": "https://www.federalregister.gov/developers/api/v1", "license": "Public Domain (U.S. Government data)", "license_url": "https://www.regulations.gov/faq"}