{"database": "openregs", "table": "cfr_sections", "is_view": false, "human_description_en": "where part_number = 455 and title_number = 40 sorted by section_id", "rows": [["40:40:32.0.1.1.28.0.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "", "", "", "\u00a7 455.10 General definitions.", "EPA", "", "", "[43 FR 17776, Apr. 25, 1978, as amended at 50 FR 40701, Oct. 4, 1985; 51 FR 44911, Dec. 15, 1986; 58 FR 50689, Sept. 28, 1993; 61 FR 57548, Nov. 6, 1996]", "As used in this part:\n\n(a)(1)  Pesticide  means any substance or mixture of substances intended for preventing, destroying, repelling, or mitigating any pest.\n\n(b)  Active ingredient  means an ingredient of a pesticide which is intended to prevent, destroy, repel, or mitigate any pest.\n\n(c)  Pesticide chemicals  means the sum of all active ingredients manufactured at each facility covered by this part.\n\n(d)  Pest  means: (1) Any insect, rodent, nematode, fungus, weed, or (2) any other form of terrestrial or aquatic plant or animal life or virus, bacteria, or other micro-organism (except virusus, bacteria, or other micro-organisms on or in living man or other living animals) which the Administrator declares to be a pest under section 25(c)(1) of Pub. L. 94-140, Federal Insecticide, Fungicide and Rodenticide Act.\n\n(e) Except as provided in this regulation, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this part.\n\n(f)  Priority Pollutants  means the toxic pollutants listed in 40 CFR part 423, appendix A.\n\n(g)  Appropriate pollution control technology  means the wastewater treatment technology listed in Table 10 to this part 455 for a particular PAI(s) including an emulsion breaking step prior to the listed technology when emulsions are present in the wastewater to be treated.\n\n(h)  Equivalent system  means a wastewater treatment system that is demonstrated in literature, treatability tests or self-monitoring data to remove a similar level of pesticide active ingredient (PAI) or priority pollutants as the applicable appropriate pollution control technology listed in Table 10 to this part 455.\n\n(i)  Formulation  of pesticide products means the process of mixing, blending or diluting one or more pesticide active ingredients (PAIs) with one or more active or inert ingredients, without an intended chemical reaction to obtain a manufacturing use product or an end use product.\n\n(j)  Group 1 mixtures  means any product whose only pesticidal active ingredient(s) is: a common food/food constituent or non-toxic household item; or is a substance that is generally recognized as safe (GRAS) by the Food and Drug Administration (21 CFR 170.30, 182, 184, and 186) in accordance with good manufacturing practices, as defined by 21 CFR part 182; or is exempt from FIFRA under 40 CFR 152.25.\n\n(k)  Group 2 mixtures  means those chemicals listed in Table 9 to this part 455.\n\n(l)  Inorganic wastewater treatment chemicals  means inorganic chemicals that are commonly used in wastewater treatment systems to aid in the removal of pollutants through physical/chemical technologies such as chemical precipitation, flocculation, neutralization, chemical oxidation, hydrolysis and/or adsorption.\n\n(m)  Interior wastewater sources  means wastewater that is generated from cleaning or rinsing the interior of pesticide formulating, packaging or repackaging equipment; or from rinsing the interior of raw material drums, shipping containers or bulk storage tanks; or cooling water that comes in direct contact with pesticide active ingredients (PAIs) during the formulating, packaging or repackaging process.\n\n(n)  Microorganisms  means registered pesticide active ingredients that are biological control agents listed in 40 CFR 152.20(a)(3) including Eucaryotes (protozoa, algae, fungi), Procaryotes (bacteria), and Viruses.\n\n(o)  Packaging  of pesticide products means enclosing or placing a formulated pesticide product into a marketable container.\n\n(p)  PFPR/Manufacturer  means a pesticide formulating, packaging and repackaging facility that also performs pesticide manufacturing on-site and commingles their PFPR process wastewaters and pesticide manufacturing process wastewaters.\n\n(q)  Pool chemicals  means pesticide products that are intended to disinfect or sanitize, reducing or mitigating growth or development of microbiological organisms including bacteria, algae, fungi or viruses in the water of swimming pools, hot tubs, spas or other such areas, in the household and/or institutional environment, as provided in the directions for use on the product label.\n\n(r)  Refilling establishment  means an establishment where the activity of repackaging pesticide product into refillable containers occurs.\n\n(s)  Repackaging of pesticide products  means the transfer of a pesticide formulation (or PAI) from one container to another without a change in composition of the formulation or the labeling content, for sale or distribution.\n\n(t)  Sanitizer products  means pesticide products that are intended to disinfect or sanitize, reducing or mitigating growth or development of microbiological organisms including bacteria, fungi or viruses on inanimate surfaces in the household, institutional, and/or commercial environment and whose labeled directions for use result in the product being discharged to Publicly Owned Treatment Works (POTWs). This definition shall also include sanitizer solutions as defined by 21 CFR 178.1010 and pool chemicals as defined in this section (455.10(q)). This definition does not include liquid chemical sterilants (including sporicidals) exempted by \u00a7 455.40(f) or otherwise, industrial preservatives, and water treatment microbiocides other than pool chemicals.\n\n(u)  Stand-alone PFPR facility  means a PFPR facility where either: No pesticide manufacturing occurs; or where pesticide manufacturing process wastewaters are not commingled with PFPR process wastewaters. Such facilities may formulate, package or repackage or manufacture other non-pesticide chemical products and be considered a \u201cstand-alone\u201d PFPR facility."], ["40:40:32.0.1.1.28.1.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.11 Compliance date for pretreatment standards for existing sources (PSES).", "EPA", "", "", "[61 FR 57549, Nov. 6, 1996]", "All discharges subject to pretreatment standards for existing sources (PSES) in subparts A and B of this part must comply with the standards no later than September 28, 1993."], ["40:40:32.0.1.1.28.1.5.2", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.20 Applicability; description of the organic pesticide chemicals manufacturing subcategory.", "EPA", "", "", "[43 FR 44846, Sept. 29, 1978, as amended at 50 FR 40702, Oct. 4, 1985; 51 FR 44911, Dec. 15, 1986; 58 FR 50689, Sept. 28, 1993]", "(a) For the purpose of calculating and applying effluent limitations for COD, BOD 5 , and TSS, and applying pH limits under BPT (\u00a7 455.22), BCT (\u00a7 455.23), and NSPS (\u00a7 455.25), the provisions of this subpart are applicable to discharges resulting from the manufacture of organic pesticide active ingredients and organo-tin pesticide active ingredients, excluding the following: Allethrin; Benzyl Benzoate; Bisethylxanthogen; Chlorophacinone; Coumafuryl; Dimethyl Phthalate; Diphacinone; Endothall Acid; EXD (Herbisan); Gibberellic Acid; Glyphosate; Naphthalene Acetic Acid; Propargite; 1,8 Naphthalic Anhydride; Quinmethionate; Rotenone; Sulfoxide; Triazine compounds (both symmetrical and asymmetrical); and Warfarin and similar anticoagulants. Provided, however, that the effluent limitations of this subpart for BOD 5  and TSS, but not COD, apply to manufacturers of Ametryn, Prometon, Prometryn, Terbutryn, Cyanazine, Atrazine, Propazine, Simazine, Terbuthylazine, Hexazinone, and Glyphosate.\n\n(b) For the purpose of calculating BPT effluent limitations for organic Pesticide chemicals, the provisions of this subpart are applicable to discharges resulting from the manufacture of the following organic active ingredients: Aldrin, BHC, Captan, Chlordane, DDD, DDE, DDT, Dichloran, Dieldrin, Endosulfan, Endrin, Heptachlor, Lindane, Methoxychlor, Mirex, PCNB, Toxaphene, Trifluralin, Azinphos Methyl, Demeton-O, Demeton-S, Diazinon, Disulfoton, Malathion, Parathion Methyl, Parathion Ethyl, Aminocarb, Carbaryl, Methiocarb, Mexacarbate, Propoxur, Barban, Chlorpropham, Diuron, Fenuron, Fenuron-TCA, Linuron, Monuron, Monuron-TCA, Neubron, Propham, Swep, 2,4-D, Dicamba, Silvex, 2,4,5-T, Siduron, Perthane, and Dicofol.\n\n(c) The intermediates used to manufacture the active ingredients and active ingredients used solely in experimental pesticides are excluded from coverage in this subpart. Insecticidal pathogenic organisms such as Bacillus thuringiensis, insect growth hormones, plant extracts such as pyrethrins; sex attractants and botanicals such as Rotenone are also excluded from BPT coverage in this subpart.\n\n(d) A plant that manufactures a pesticide active ingredient listed in Table 1 of this part must comply with the BAT effluent limitations and new source performance and pretreatment standards for that pesticide active ingredient listed in table 2 (BAT and PSES) or Table 3 of this part (NSPS and PSNS). A plant that manufactures a pesticide active ingredient listed in Table 1 of this part must also comply with the BAT effluent limitations and new source performance and pretreatment standards for priority pollutants listed in Tables 4, 5 and 6 of this part. The limitations in Table 4 of this part (BAT and NSPS) are applicable to existing and new direct discharge point sources that use End-of-Pipe biological treatment. The limitations in Table 5 of this part (BAT and NSPS) are applicable to existing and new direct discharge point sources that do not use end-of-pipe biological treatment. The limitations in Table 6 of this part (PSES and PSNS) are applicable to existing and new sources that discharge to Publicly Owned Treatment Works.\n\n(e) In the case of lead and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the applicable tables in this subpart times the flow from non-complexed lead-bearing waste streams for lead and times the flow from non-complexed cyanide-bearing waste streams for total cyanide. Discharges of cyanide in cyanide-bearing waste streams are not subject to the cyanide limitation and standards of this subpart if the permit writer or control authority determines that the cyanide limitations and standards are not achievable due to elevated levels of non-amenable cyanide ( i.e. , cyanide that is not oxidized by chlorine treatment) that result from the unavoidable complexing of cyanide at the process source of the cyanide-bearing waste stream and establishes an alternative total cyanide or amenable cyanide limitation that reflects the best available technology economically achievable. The determination must be based upon a review of relevant engineering, production, and sampling and analysis information, including measurements of both total and amenable cyanide in the waste stream. An analysis of the extent of complexing in the waste stream, based on the foregoing information, and its impact on cyanide treatability shall be set forth in writing and, for direct dischargers, be contained in the fact sheet required by 40 CFR 124.8."], ["40:40:32.0.1.1.28.1.5.3", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.21 Specialized definitions.", "EPA", "", "", "[43 FR 44846, Sept. 29, 1978, as amended at 58 FR 50689, Sept. 28, 1993]", "(a)  Organic active ingredients  means carbon-containing active ingredients used in pesticides, excluding metalloorganic active ingredients.\n\n(b)  Total organic active ingredients  means the sum of all organic active ingredients covered by \u00a7 455.20(a) which are manufactured at a facility subject to this subpart.\n\n(c)  Organic pesticide chemicals  means the sum of all organic active ingredients listed in \u00a7 455.20(b) which are manufactured at a facility subject to this subpart.\n\n(d)  Process wastewater flow  means the sum of the average daily flows from the following wastewater streams: Process stream and product washes, equipment and floor washes, water used as solvent for raw materials, water used as reaction medium, spent acids, spent bases, contact cooling water, water of reaction, air pollution control blowdown, steam jet blowdown, vacuum pump water, pump seal water, safety equipment cleaning water, shipping container cleanout, safety shower water, contaminated storm water, and product/process laboratory quality control wastewater. Notwithstanding any other regulation, process wastewater flow for the purposes of this subpart does not include wastewaters from the production of intermediate chemicals.\n\n(e)  Process wastewater pollutants  means those pollutants present in process wastewater flow."], ["40:40:32.0.1.1.28.1.5.4", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.", "EPA", "", "", "[43 FR 44846, Sept. 29, 1978, as amended at 60 FR 33971, June 29, 1995]", "Except as provided in \u00a7\u00a7 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). The following limitations establish the quantity or quality of pollutants or pollutant properties controlled by this paragraph which may be discharged from the manufacture of organic active ingredient:\n\n1  Within the range of 6.0 to 9.0.\n\nNote:  For COD, BOD 5 , and TSS, metric units: Kilogram/1,000 kg of total organic active ingredients. English units: Pound/1,000 lb of total organic active ingredients. For organic pesticide chemicals\u2014metric units: Kilogram/1,000 kg of organic pesticide chemicals. English units: Pound/1,000 lb of organic pesticide chemicals."], ["40:40:32.0.1.1.28.1.5.5", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).", "EPA", "", "", "[58 FR 50689, Sept. 28, 1993]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology: The limitations for BOD, TSS and pH are the same as those specified in 40 CFR 455.22.\n\nBCT Effluent Limitations\n\nEffluent Limitations\n\n* Within the range 6.0 to 9.0\n\n** Metric units: Kilogram pollutant/1,000 kg of total organic active ingredients.\n\nEnglish units: Pound pollutant/1,000 lb of total organic active ingredients"], ["40:40:32.0.1.1.28.1.5.6", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.24 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available control technology economically achievable (BAT).", "EPA", "", "", "[58 FR 50690, Sept. 28, 1993]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology as specified in 40 CFR 455.20(d). For the priority pollutants, such sources must achieve discharges not exceeding the quantity (mass) determined by multipying the process wastewater flow subject to this subpart as defined in 40 CFR 455.21 (d) times the concentrations listed in table 4 or table 5 of this part, as appropriate, of this subpart."], ["40:40:32.0.1.1.28.1.5.7", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.25 New source performance standards (NSPS).", "EPA", "", "", "[58 FR 50690, Sept. 28, 1993]", "(a) Any new source subject to this subpart which discharges process wastewater pollutants must achieve the new source performance standards specified in 40 CFR 455.20(d), and subject to 455.20(a), must meet the following standards for BOD 5 , TSS, COD and pH:\n\nNew Source Performance Standards\n\nStandards\n\n* Within the range 6.0 to 9.0\n\n** Metric units: Kilogram pollutant /1,000 kg of total organic active ingredients.\n\nEnglish units: Pound pollutant/1,000 lb of total organic active ingredients\n\n(b) For the priority pollutants, such sources must achieve discharges not exceeding the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart as defined in 40 CFR 455.21(d) times the concentrations listed in table 4 or table 5 of this part, as appropriate, of this subpart."], ["40:40:32.0.1.1.28.1.5.8", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.26 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "[58 FR 50690, Sept. 28, 1993]", "Except as provided in 40 CFR 403.7, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the pretreatment standards for existing sources (PSES) as specified in 40 CFR 455.20(d). For the priority pollutants, such sources must achieve discharges not exceeding the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart as defined in 40 CFR 455.21(d) times the concentrations listed in Table 6 of this part. If mass limitations have not been developed as required, the source shall achieve discharges not exceeding the concentration limitations listed in Table 6 of this part."], ["40:40:32.0.1.1.28.1.5.9", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "A", "Subpart A\u2014Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.27 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "[58 FR 50690, Sept. 28, 1993]", "Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and must achieve the pretreatment standards for new sources (PSNS) as specified in 40 CFR 455.20(d). For the priority pollutants, the source must achieve discharges not exceeding the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart as defined in 40 CFR 455.21(d) times the concentrations listed in table 6 of this part. If mass limitations have not been developed as required, the source shall achieve discharges not exceeding the concentration limitations listed in table 6 of this part."], ["40:40:32.0.1.1.28.2.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.30 Applicability; description of the metallo-organic pesticide chemicals manufacturing subcategory.", "EPA", "", "", "", "The provisions of this subpart are applicable to discharges resulting from the manufacture of metallo-organic active ingredients containing mercury, cadmium, arsenic, or copper. The manufacture of intermediates used to manufacture the active ingredients are excluded from coverage by this subpart."], ["40:40:32.0.1.1.28.2.5.2", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.31 Specialized definitions.", "EPA", "", "", "", "(a) \u201cMetallo-organic active ingredients\u201d means carbon containing active ingredients containing one or more metallic atoms in the structure."], ["40:40:32.0.1.1.28.2.5.3", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.", "EPA", "", "", "[60 FR 33971, June 29, 1995]", "Except as provided in \u00a7\u00a7 125.30 through 125.32, any existing point source subject to this subpart, shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). The following limitations establish the quantity or quality of pollutants or pollutant properties controlled by this paragraph which may be discharged from the manufacture of metallo-organic active ingredient: There shall be no discharge of process waste water pollutants to navigable waters."], ["40:40:32.0.1.1.28.2.5.4", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.28.2.5.5", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.34 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available control technology economically achievable (BAT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.28.2.5.6", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.35 New source performance standards (NSPS). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.28.2.5.7", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.36 Pretreatment standards for existing sources (PSES). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.28.2.5.8", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "B", "Subpart B\u2014Metallo-Organic Pesticide Chemicals Manufacturing Subcategory", "", "\u00a7 455.37 Pretreatment standards for new sources (PSNS). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.28.3.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.40 Applicability; description of the pesticide formulating, packaging and repackaging subcategory.", "EPA", "", "", "[61 FR 57549, Nov. 6, 1996]", "(a) The provisions of this subpart are applicable to discharges resulting from all pesticide formulating, packaging and repackaging operations except as provided in paragraphs (b), (c), (d), (e) and (f) of this section.\n\n(b) The provisions of this subpart do not apply to repackaging of agricultural pesticides performed at refilling establishments, as described in \u00a7 455.60.\n\n(c) The provisions of this subpart do not apply to wastewater discharges from: the operation of employee showers and laundry facilities; the testing of fire protection equipment; the testing and emergency operation of safety showers and eye washes; storm water; Department of Transportation (DOT) aerosol leak test bath water from non-continuous overflow baths (batch baths) where no cans have burst from the time of the last water change-out; and on-site laboratories from cleaning analytical equipment and glassware and rinsing the retain sample container (except for the initial rinse of the retain sample container which is considered a process wastewater source for this subpart).\n\n(d) The provisions of this subpart do not apply to wastewater discharges from the formulation, packaging and/or repackaging of sanitizer products (including pool chemicals); microorganisms; inorganic wastewater treatment chemicals; group 1 mixtures and group 2 mixtures, as defined under \u00a7 455.10.\n\n(e) The provisions of this subpart do not apply to wastewater discharges from the development of new formulations of pesticide products and the associated efficacy and field testing at on-site or stand-alone research and development laboratories where the resulting pesticide product is not produced for sale.\n\n(f) The provisions of this subpart do not apply to wastewater discharges from the formulation, packaging and/or repackaging of liquid chemical sterilant products (including any sterilant or subordinate disinfectant claims on such products) for use on a critical or semi-critical device, as defined in Section 201 of the Federal Food, Drug and Cosmetic Act and in Section 2(u) of the Federal Insecticide, Fungicide and Rodenticide Act."], ["40:40:32.0.1.1.28.3.5.2", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.41 Special definitions.", "EPA", "", "", "[61 FR 57549, Nov. 6, 1996]", "(a)  Initial Certification Statement  for this subpart means a written submission to the appropriate permitting authority, e.g., the local Control Authority (the POTW) or NPDES permit writer which must be signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22 and which:\n\n(1) Lists and describes those product families, process lines and/or process units for which the PFPR facility is implementing the Pollution Prevention Alternative (\u201cP2 Alternative\u201d);\n\n(2) Describes the PFPR facility specific practices for each product family/process line/process unit which are to be practiced as part of the P2 Alternative;\n\n(3) Describes any justification allowing modification to the practices listed in Table 8 to this part 455; and\n\n(4) Lists the treatment system being used to obtain a P2 allowable discharge (as defined in 455.41).\n\n(b)  Periodic Certification Statement  for this subpart means a written submission to the appropriate permitting authority, e.g., the local Control Authority (the POTW) or NPDES permit writer, which states that the P2 Alternative is being implemented in the manner set forth in the control mechanism (for indirect dischargers) or NPDES permit (for direct dischargers) or that a justification allowing modification of the practices listed in Table 8 to this part 455 has been implemented resulting in a change in the pollution prevention practices conducted at the facility. The Periodic Certification Statement must be signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22.\n\n(c)  On-site Compliance Paperwork  for this subpart means data or information maintained in the offices of the PFPR facility which supports the initial and periodic certification statements as follows:\n\n(1) Lists and describes those product families, process lines and/or process units for which the facility is implementing the P2 Alternative;\n\n(2) Describes the facility specific practices for each product family/process line/process unit which are to be practiced as part of the P2 Alternative;\n\n(3) Describes any justification allowing modification to the practices listed in Table 8 to this part 455;\n\n(4) Includes a written discussion demonstrating that the treatment system being used contains the appropriate pollution control technologies (or equivalent systems/pesticide manufacturing systems) for removing the PAIs which may be found in the wastewater;\n\n(5) Establishes a method for demonstrating to the permitting/control authority that the treatment system is well operated and maintained; and\n\n(6) Includes a discussion of the rationale for choosing the method of demonstration.\n\n(d) For Indirect Dischargers:\n\nPollution prevention (P2) allowable discharge (excluding interior wastewater sources, leak and spill clean-up water, and floor wash)  for this subpart means the quantity of/concentrations of pollutants in PFPR process wastewaters that remain after a facility has demonstrated that it is using the specified practices of the Pollution Prevention Alternative as listed in Table 8 to this part 455.\n\nPollution prevention (P2) allowable discharge for interior wastewater sources, leak and spill cleanup water, and floor wash  for this subpart means the quantity of/concentrations of pollutants in PFPR process wastewaters that remain after a facility has demonstrated that it is using the specified practices of the Pollution Prevention Alternative as listed in Table 8 to this part 455 and that have been pretreated using appropriate pollution control technologies, as defined in \u00a7 455.10(g), or a pesticide manufacturer's treatment system, or an equivalent system, used individually, or in any combination to achieve a sufficient level of pollutant reduction. Pretreatment requirements may be modified or waived by the Control Authority (POTW) to the extent that removal credits have been granted by the POTW in accordance with 40 CFR 403.7, provided the granting of such credits does not result in pass through or interference as defined in 40 CFR 403.3 and complies with the provisions of 40 CFR 403.5. The facility must demonstrate that the appropriate pollution control technology is properly maintained and operated.\n\n(e) For Direct Dischargers:\n\nPollution prevention (P2) allowable discharge  for this subpart means the quantity of/concentrations of pollutants in PFPR process wastewaters that remain after a facility has demonstrated that it is using the specified practices of the Pollution Prevention Alternative as listed in Table 8 to this part 455 and that have been treated using appropriate pollution control technologies, as defined in \u00a7 455.10(g), or a pesticide manufacturer's treatment system, or an equivalent system, used individually, or in any combination to achieve a sufficient level of pollutant reduction. The facility must demonstrate that the appropriate pollution control technology is properly maintained and operated.\n\n(f)  Process wastewater,  for this subpart, means all wastewater associated with pesticide formulating, packaging and repackaging except for sanitary water, non-contact cooling water and those wastewaters excluded from the applicability of the rule in \u00a7 455.40."], ["40:40:32.0.1.1.28.3.5.3", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.42 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available, (BPT).", "EPA", "", "", "[61 FR 57550, Nov. 6, 1996]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.\n\n(a) Except as provided in paragraph (b) of this section, the following limitations establish the quantity or quality of pollutants or pollutant properties controlled by this paragraph which may be discharged from the formulation, packaging or repackaging of pesticides: There shall be no discharge of process wastewater pollutants to navigable waters.\n\nFor existing PFPR/Manufacturer facilities, as defined in \u00a7 455.10(p), which are also subject to the provisions of \u00a7 455.22 or \u00a7 455.32, \u201czero discharge\u201d means that permitting authorities shall provide no additional discharge allowance for those pesticide active ingredients (PAIs) in the pesticide formulating, packaging and repackaging wastewaters when those PAIs are also manufactured at the same facility.\n\n(b) Any existing facility subject to paragraph (a) of this section may have a pollution prevention allowable discharge, as defined in \u00a7 455.41(e), of wastewater pollutants to navigable waters if the discharger agrees to NPDES permit conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Professional Judgement for modifications not listed in Table 8 of this part 455);\n\n(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its intent to utilize the Pollution Prevention Alternative by submitting to the NPDES permit writer an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its NPDES permitting authority a periodic certification statements as described in \u00a7 455.41(b) once each year of operation; and\n\n(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c)."], ["40:40:32.0.1.1.28.3.5.4", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.43 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).", "EPA", "", "", "[61 FR 57550, Nov. 6, 1996]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.\n\n(a) Except as provided in paragraph (b) of this section, the BCT limitations are established as follows: There shall be no discharge of process wastewater pollutants to navigable waters.\n\nFor existing PFPR/Manufacturer facilities, as defined in \u00a7 455.10(p), which are also subject to the provisions of \u00a7\u00a7 455.23,  zero discharge  means that permitting authorities shall provide no discharge additional discharge allowance for those pesticide active ingredients (PAIs) in the pesticide formulating, packaging and repackaging wastewaters when those PAIs are also manufactured at the same facility.\n\n(b) Any existing facility subject to paragraph (a) of this section may have a pollution prevention allowable discharge, as defined in \u00a7 455.41(e), of wastewater pollutants to navigable waters if the discharger agrees to NPDES permit conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Professional Judgement for modifications not listed in Table 8 of this part 455);\n\n(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its intent to utilize the Pollution Prevention Alternative by submitting to the NPDES permit writer an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in \u00a7 455.41(b) once each year of operation; and\n\n(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c)."], ["40:40:32.0.1.1.28.3.5.5", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.44 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available control technology economically achievable (BAT).", "EPA", "", "", "[61 FR 57551, Nov. 6, 1996]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology (BAT).\n\n(a) Except as provided in paragraph (b) of this section, the BAT limitations are established as follows: There shall be no discharge of process wastewater pollutants to navigable waters.\n\nFor existing PFPR/Manufacturer facilities, as defined in \u00a7 455.10(p), which are also subject to the provisions of \u00a7\u00a7 455.24,  zero discharge  means that permitting authorities shall provide no additional discharge allowance for those pesticide active ingredients (PAIs) in the pesticide formulating, packaging and repackaging wastewaters when those PAIs are also manufactured at the same facility.\n\n(b) Any existing facility subject to paragraph (a) of this section may have a pollution prevention allowable discharge, as defined in \u00a7 455.41(e), of wastewater pollutants to navigable waters if the discharger agrees to NPDES permit conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Professional Judgement for modifications not listed on Table 8 of this part 455);\n\n(2) The discharger will notify its NPDES permitting authority at the time of renewal or modification of its permit, of its intent to utilize the Pollution Prevention Alternative by submitting to the NPDES permit writer an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its NPDES permit writer a periodic certification statement as described in \u00a7 455.41(b) once each year of operation; and\n\n(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c)."], ["40:40:32.0.1.1.28.3.5.6", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.45 New source performance standards (NSPS).", "EPA", "", "", "[61 FR 57551, Nov. 6, 1996]", "(a) Any new source, except as provided in paragraph (b) of this section, subject to this subpart which discharges process wastewater must meet the following standards: There shall be no discharge of process wastewater pollutants to navigable waters.\n\nFor new PFPR/Manufacturer facilities, as defined in \u00a7 455.10(p), which are also subject to the provisions of \u00a7\u00a7 455.25,  zero discharge  means that permitting authorities shall provide no additional discharge allowance for those pesticide active ingredients (PAIs) in the pesticide formulating, packaging and repackaging wastewaters when those PAIs are also manufactured at the same facility.\n\n(b) Any new source subject to paragraph (a) of this section may have a pollution prevention allowable discharge, as defined in \u00a7 455.41(e), of wastewater pollutants to navigable waters if the discharger agrees to NPDES permit conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Professional Judgement for modifications not listed in Table 8 of this part 455);\n\n(2) The discharger will notify its NPDES permit writer at the time of submitting its application for a permit, of its intent to utilize the Pollution Prevention Alternative by submitting to the NPDES permit writer an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in \u00a7 455.41(b) once each year of operation; and\n\n(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c)."], ["40:40:32.0.1.1.28.3.5.7", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.46 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "[61 FR 57551, Nov. 6, 1996]", "(a) Except as provided in 40 CFR 403.7 and 403.13 or in paragraph (b) of this section, no later than November 6, 1999, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve PSES as follows: There shall be no discharge of process wastewater pollutants.\n\n(b) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to paragraph (a) of this section which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and may have a pollution prevention allowable discharge of wastewater pollutants, as defined in \u00a7 455.41(d), if the discharger agrees to control mechanism or pretreatment agreement conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for modifications not listed in Table 8 to this part 455);\n\n(2) The discharger will notify its local Control Authority at the time of renewing or modifying its individual control mechanism or pretreatment agreement of its intent to utilize the Pollution Prevention Alternative by submitting to the local Control Authority an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its local Control Authority a periodic certification statement as described in \u00a7 455.41(b) during the months of June and December of each year of operation; and\n\n(4) The discharger will maintain at the offices of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c).\n\n(c) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to \u00a7 455.46(b) which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and may submit a request to its Control Authority to waive pretreatment of: floor wash; and/or a non-reusable final rinse of a triple rinse, if the concentrations of pesticide active ingredients and priority pollutants in those wastewater sources have been demonstrated to be too low to be effectively pretreated at the facility. The Control Authority may waive pretreatment for these two wastewaters only if the existing source makes the demonstrations and is in compliance with 40 CFR 403.5."], ["40:40:32.0.1.1.28.3.5.8", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "C", "Subpart C\u2014Pesticide Chemicals Formulating and Packaging Subcategory", "", "\u00a7 455.47 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "[61 FR 57552, Nov. 6, 1996]", "(a) Except as provided in 40 CFR 403.7 and 403.13 or in paragraph (b) of this section, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve PSNS as follows: There shall be no discharge of process wastewater pollutants.\n\n(b) Except as provided in 40 CFR 403.7 and 403.13, any new source subject to paragraph (a) of this section which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and may have a pollution prevention allowable discharge of wastewater pollutants, as defined in \u00a7 455.41(d), if the discharger agrees to control mechanism or pretreatment agreement conditions as follows:\n\n(1) The discharger will meet the requirements of the Pollution Prevention Alternative listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for modifications not listed in Table 8 to this part 455);\n\n(2) The discharger will notify its local Control Authority at the time of submitting its application for an individual control mechanism or pretreatment agreement of its intent to utilize the Pollution Prevention Alternative by submitting to the local Control Authority an initial certification statement as described in \u00a7 455.41(a);\n\n(3) The discharger will submit to its local Control Authority a periodic certification statement as described in \u00a7 455.41(b) during the months of June and December of each year of operation; and\n\n(4) The discharger will maintain at the offices of the facility and make available for inspection the on-site compliance paperwork as described in \u00a7 455.41(c).\n\n(c) Except as provided in 40 CFR 403.7 and 403.13, any new source subject to paragraph (b) of this section which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and may submit a request to its Control Authority to waive pretreatment of: floor wash; and/or a non-reusable final rinse of a triple rinse, if the concentrations of pesticide active ingredients and priority pollutants in those wastewater sources have been demonstrated to be too low to be effectively pretreated at the facility. The Control Authority may waive pretreatment for these two wastewaters only if the new source makes the demonstrations and is in compliance with 40 CFR 403.5."], ["40:40:32.0.1.1.28.4.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "D", "Subpart D\u2014Test Methods for Pesticide Pollutants", "", "\u00a7 455.50 Identification of test procedures.", "EPA", "", "", "[72 FR 11248, Mar. 12, 2007]", "The pesticide active ingredients to which this section applies and for which effluent limitations guidelines and standards are specified in this part are named, together with the Chemical Abstracts Service (CAS) number (provided to assist in identifying the pesticide active ingredient only) and analytical method(s) designation(s) in Table IG at 40 CFR 136.3(a). Except as provided in 40 CFR 136.5, the discharge parameter values required under the Clean Water Act must be determined by one of the analytical methods cited and described in Table IG at 40 CFR 136.3(a). Pesticide manufacturers may not use the analytical method cited in Table IB, Table IC, or Table ID of 40 CFR 136.3(a) to make these determinations (except where the method cited in those tables is identical to the method specified in Table IG at 40 CFR 136.3(a)). The full texts of the analytical methods cited in Table IG at 40 CFR 136.3(a) are contained in the  Methods For The Determination of Nonconventional Pesticides In Municipal and Industrial Wastewater, Volume I,  EPA 821-R-93-010A (August 1993 Revision I) and  Volume II,  EPA 821-R-93-010B (August 1993) (the \u201cCompendium\u201d). Each pesticide chemical manufacturer that is required to determine discharge parameter values under this part using one of the analytical methods cited in Table IG at 40 CFR 136.3(a) must request in writing a copy of the Compendium from the permit authority or local control authority (as applicable) prior to determining such discharge parameter values, unless the manufacturer already has a copy."], ["40:40:32.0.1.1.28.5.5.1", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.60 Applicability; description of repackaging of agricultural pesticides performed by refilling establishments subcategory.", "EPA", "", "", "", "(a) The provisions of this subpart are applicable to discharges resulting from all repackaging of agricultural pesticides performed by refilling establishments, as defined in \u00a7 455.10; whose primary business is wholesale or retail sales; and where no pesticide manufacturing, formulating or packaging occurs, except as provided in paragraphs (b), (c) and (d) of this section.\n\n(b) The provisions of this subpart do not apply to wastewater discharges from custom application or custom blending, as defined in 40 CFR 167.3.\n\n(c) The provisions of this subpart do not apply to wastewater discharges from: the operation of employee showers and laundry facilities; the testing of fire protection equipment; the testing and emergency operation of safety showers and eye washes; or storm water.\n\n(d) The provisions of this subpart do not apply to wastewater discharges from the repackaging of microorganisms or Group 1 Mixtures, as defined under \u00a7 455.10, or non-agricultural pesticide products."], ["40:40:32.0.1.1.28.5.5.2", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.61 Special definitions.", "EPA", "", "", "", "Process wastewater,  for this subpart, means all wastewater except for sanitary water and those wastewaters excluded from the applicability of the rule in \u00a7 455.60."], ["40:40:32.0.1.1.28.5.5.3", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.62 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable pollutant control technology (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable pollutant control technology: There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.28.5.5.4", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.63 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollution control technology: There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.28.5.5.5", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.64 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable: There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.28.5.5.6", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.65 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart which discharges process wastewater pollutants must meet the following standards: There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.28.5.5.7", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.66 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Except as provided in 40 CFR 403.7 and 403.13, no later than November 6, 1999 subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the pretreatment standards for existing sources as follows: There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.28.5.5.8", 40, "Protection of Environment", "I", "N", "455", "PART 455\u2014PESTICIDE CHEMICALS", "E", "Subpart E\u2014Repackaging of Agricultural Pesticides Performed at Refilling Establishments", "", "\u00a7 455.67 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Except as provided in 40 CFR 403.7 and 403.13, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the pretreatment standards for existing sources as follows: There shall be no discharge of process wastewater pollutants."]], "truncated": false, "filtered_table_rows_count": 35, "expanded_columns": [], "expandable_columns": [], "columns": ["section_id", "title_number", "title_name", "chapter", "subchapter", "part_number", "part_name", "subpart", "subpart_name", "section_number", "section_heading", "agency", "authority", "source_citation", "amendment_citations", "full_text"], "primary_keys": ["section_id"], "units": {}, "query": {"sql": "select section_id, title_number, title_name, chapter, subchapter, part_number, part_name, subpart, subpart_name, section_number, section_heading, agency, authority, source_citation, amendment_citations, full_text from cfr_sections where \"part_number\" = :p0 and \"title_number\" = :p1 order by section_id limit 101", "params": {"p0": "455", "p1": "40"}}, "facet_results": {"title_number": {"name": "title_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=455&title_number=40", "results": [{"value": 40, "label": 40, "count": 35, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=455", "selected": true}], "truncated": false}, "agency": {"name": "agency", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=455&title_number=40", "results": [{"value": "EPA", "label": "EPA", "count": 35, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=455&title_number=40&agency=EPA", "selected": false}], "truncated": false}, "part_number": {"name": "part_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=455&title_number=40", "results": [{"value": "455", "label": "455", "count": 35, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?title_number=40", "selected": true}], "truncated": false}}, "suggested_facets": [{"name": "subpart", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=455&title_number=40&_facet=subpart"}, {"name": "subpart_name", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=455&title_number=40&_facet=subpart_name"}, {"name": "amendment_citations", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=455&title_number=40&_facet=amendment_citations"}], "next": null, "next_url": null, "private": false, "allow_execute_sql": true, "query_ms": 1018.703687004745, "source": "Federal Register API & Regulations.gov API", "source_url": "https://www.federalregister.gov/developers/api/v1", "license": "Public Domain (U.S. Government data)", "license_url": "https://www.regulations.gov/faq"}