{"database": "openregs", "table": "cfr_sections", "is_view": false, "human_description_en": "where part_number = 429 and title_number = 40 sorted by section_id", "rows": [["40:40:32.0.1.1.5.0.2.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "", "", "", "\u00a7 429.10 Applicability.", "EPA", "", "", "", "This part applies to any timber products processing operation, and any plant producing insulation board with wood as the major raw material, which discharges or may discharge process wastewater pollutants to the waters of the United States, or which introduces or may introduce process wastewater pollutants into a publicly owned treatment works."], ["40:40:32.0.1.1.5.0.2.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "", "", "", "\u00a7 429.11 General definitions.", "EPA", "", "", "[46 FR 8285, Jan. 26, 1981, as amended at 46 FR 57287, Nov. 23, 1981; 69 FR 46045, July 30, 2004]", "In addition to the definitions set forth in 40 CFR part 401, the following definitions apply to this part:\n\n(a) The term \u201chydraulic barking\u201d means a wood processing operation that removes bark from wood by the use of water under a pressure of 6.8 atm (100 psia) or greater.\n\n(b) The terms \u201ccubic feet\u201d or \u201ccubic meters\u201d of production in subpart A means the cubic feet or cubic meters of logs from which bark is removed.\n\n(c) The term \u201cprocess wastewater\u201d specifically excludes non-contact cooling water, material storage yard runoff (either raw material or processed wood storage), boiler blowdown, and wastewater from washout of thermal oxidizers or catalytic oxidizers, wastewater from biofilters, or wastewater from wet electrostatic precipitators used upstream of thermal oxidizers or catalytic oxidizers installed by facilities covered by subparts B, C, D or M to comply with the national emissions standards for hazardous air pollutants (NESHAP) for plywood and composite wood products (PCWP) facilities (40 CFR part 63, subpart DDDD). For the dry process hardboard, veneer, finishing, particleboard, and sawmills and planing mills subcategories, fire control water is excluded from the definition.\n\n(d) The term \u201cgross production of fiberboard products\u201d means the air dry weight of hardboard or insulation board following formation of the mat and prior to trimming and finishing operations.\n\n(e) The term \u201chardboard\u201d means a panel manufactured from interfelted ligno-cellulosic fibers consolidated under heat and pressure to a density of 0.5 g/cu cm (31 lb/cu ft) or greater.\n\n(f) The term \u201cinsulation board\u201d means a panel manufactured from interfelted ligno-cellulosic fibers consolidated to a density of less than 0.5 g/cu cm (less than 31 lb/cu ft).\n\n(g) The term \u201csmooth-one-side (S1S) hardboard\u201d means hardboard which is produced by the wet-matting, wet-pressing process.\n\n(h) The term \u201csmooth-two-sides (S2S) hardboard\u201d means hardboard which is produced by the wet-matting, dry-pressing process.\n\n(i) The term \u201cdebris\u201d means woody material such as bark, twigs, branches, heartwood or sapwood that will not pass through a 2.54 cm (1.0 in) diameter round opening and is present in the discharge from a wet storage facility.\n\n(j) For the subcategories for which numerical limitations are given, the daily maximum limitation is a value that should not be exceeded by any one effluent measurement. The 30-day limitation is a value that should not be exceeded by the average of daily measurements taken during any 30-day period."], ["40:40:32.0.1.1.5.0.2.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "", "", "", "\u00a7 429.12 Monitoring requirements. [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.1.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.20 Applicability; description of the barking subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the barking of logs by plants in SIC major group 24, and by plants producing insulation board (SIC group 2661)."], ["40:40:32.0.1.1.5.1.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.21 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n\n(a) The following limitations apply to all mechanical barking installations: There shall be no discharge of process wastewater pollutants into navigable waters.\n\n(b) The following limitations constitute the maximum permissible discharge for hydraulic barking installations:\n\nSubpart A\n\n1  Within the range 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.1.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.1.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.23 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.1.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.24 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS):\n\n(a) The following limitations apply to all mechanical barking installations: There shall be no discharge of process wastewater pollutants into navigable waters.\n\n(b) The following limitations constitute the maximum permissible discharge for hydraulic barking installations:\n\nSubpart A\n\n1  Within the range 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.1.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.25 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.1.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Barking Subcategory", "", "\u00a7 429.26 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.10.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.110 Applicability; description of the log washing subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the log washing process in which water under pressure is applied to logs for the purpose of removing foreign material from the surface of the log before further processing."], ["40:40:32.0.1.1.5.10.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.111 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): There shall be no discharge of process wastewater pollutants to navigable waters containing a total suspended solids concentration greater than 50 mg/l and the pH shall be within the range of 6.0 to 9.0."], ["40:40:32.0.1.1.5.10.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.112 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.10.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.113 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.10.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.114 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.10.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.115 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.10.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "J", "Subpart J\u2014Log Washing Subcategory", "", "\u00a7 429.116 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.11.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.120 Applicability; description of the sawmills and planing mills subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the timber products processing procedures that include all or part of the following operations: bark removal (other than hydraulic barking as defined in \u00a7 429.11 of this part), sawing, resawing, edging, trimming, planing and machining."], ["40:40:32.0.1.1.5.11.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.121 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.11.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.122 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.11.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.123 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.11.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.124 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.11.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.125 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.11.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "K", "Subpart K\u2014Sawmills and Planing Mills Subcategory", "", "\u00a7 429.126 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.12.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.130 Applicability; description of the finishing subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the drying, planing, dipping, staining, end coating, moisture proofing, fabrication, and by-product utilization timber processing operations not otherwise covered by specific guidelines and standards."], ["40:40:32.0.1.1.5.12.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.131 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.12.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.132 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.12.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.133 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subject must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.12.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.134 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.12.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.135 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.12.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "L", "Subpart L\u2014Finishing Subcategory", "", "\u00a7 429.136 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.13.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.140 Applicability; description of the particleboard manufacturing subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which manufactures particleboard."], ["40:40:32.0.1.1.5.13.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.141 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.13.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.142 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.13.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.143 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.13.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.144 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.13.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.145 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.13.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "M", "Subpart M\u2014Particleboard Manufacturing Subcategory", "", "\u00a7 429.146 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduce process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.14.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.150 Applicability; description of the insulation board subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from plants which produce insulation board using wood as the primary raw material. Specifically excluded from this subpart is the manufacture of insulation board from the primary raw material bagasse."], ["40:40:32.0.1.1.5.14.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.151 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n\nSubpart N\n\n1  Within the range 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.14.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.152 [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.14.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.153 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.14.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.154 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.14.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.155 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.14.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "N", "Subpart N\u2014Insulation Board Subcategory", "", "\u00a7 429.156 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.15.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.160 Applicability; description of the wood furniture and fixture production without water wash spray booth(s) or without laundry facilities subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the manufacture of wood furniture and fixtures at establishments that (a) do not utilize water wash spray booths to collect and contain the overspray from spray applications of finishing materials and (b) do not maintain on-site laundry facilities for fabric utilized in various finishing operations."], ["40:40:32.0.1.1.5.15.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.161 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology limitations (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.15.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.162 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.15.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.163 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.15.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.164 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS):\n\nThere shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.15.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.165 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.15.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "O", "Subpart O\u2014Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities Subcategory", "", "\u00a7 429.166 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.16.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.170 Applicability; description of the wood furniture and fixture production with water wash spray booth(s) or with laundry facilities subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from the manufacture of wood furniture and fixtures at establishments that either (a) utilize water wash spray booth(s) to collect and contain the overspray from spray applications of finishing materials, or (b) utilize on-site laundry facilities for fabric utilized in various finishing operations."], ["40:40:32.0.1.1.5.16.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.171 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): Settleable solids shall be less than or equal to 0.2 ml/l and pH shall be between 6.0 and 9.0 at all times."], ["40:40:32.0.1.1.5.16.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.172 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.16.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.173 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.5.16.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.174 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants."], ["40:40:32.0.1.1.5.16.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.175 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.16.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "P", "Subpart P\u2014Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities Subcategory", "", "\u00a7 429.176 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.2.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.30 Applicability; description of the veneer subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which manufactures veneer and does not store or hold raw materials in wet storage conditions."], ["40:40:32.0.1.1.5.2.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.31 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available (BPT):\n\n(a) The following limitations constitute the maximum permissible discharge for all veneer manufacturing installations other than those referred to in paragraphs (b) and (c) of this section: There shall be no discharge of process wastewater pollutants into navigable waters.\n\n(b) The following limitations constitute the maximum permissible discharge for softwood veneer manufacturing processes which use direct steaming for the conditioning of logs:\n\nSubpart B\n\n1  Within the range 6.0 to 9.0 at all times.\n\n(c) The following limitations constitute the maximum permissible discharge for hardwood veneer manufacturing processes which use direct steaming for the conditioning of logs:\n\nSubpart B\n\n1  Within the range 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.2.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.2.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.33 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.2.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.34 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.2.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.35 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.2.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Veneer Subcategory", "", "\u00a7 429.36 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.3.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.40 Applicability; description of the plywood subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plywood producing plant that does not store or hold raw materials in wet storage conditions."], ["40:40:32.0.1.1.5.3.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.41 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.3.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.42 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.3.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.43 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.3.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.44 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.3.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.45 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.3.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Plywood Subcategory", "", "\u00a7 429.46 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.4.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.50 Applicability; description of the dry process hardboard subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant that produces hardboard using the dry matting process for forming the board mat."], ["40:40:32.0.1.1.5.4.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.51 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.4.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.52 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.4.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.4.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.54 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.4.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.55 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.4.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "D", "Subpart D\u2014Dry Process Hardboard Subcategory", "", "\u00a7 429.56 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.5.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.60 Applicability; description of the wet process hardboard subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which produces hardboard products using the wet matting process for forming the board mat."], ["40:40:32.0.1.1.5.5.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.61 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "[46 FR 8285, Jan. 26, 1981, as amended at 46 FR 11972, Feb. 12, 1981]", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n\n(a) The following limitations apply to plants which produce smooth-one-side (S1S) hardboard:\n\nSubpart E (S1S)\n\n1  Within the range 6.0 to 9.0 at all times.\n\n(b) The following limitations apply to plants which produce smooth-two-sides (S2S) hardboard:\n\nSubpart E (S2S)\n\n1  Within the range 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.5.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.62 [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.5.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.63 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.5.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.64 New source performance standards (NSPS).", "EPA", "", "", "[46 FR 8285, Jan. 26, 1981, as amended at 46 FR 57287, Nov. 23, 1981]", "For purpose of this new source performance standard only, \u201cnew source\u201d means a source which is constructed at a site at which no other source covered by this part is located. Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.5.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.65 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.5.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "E", "Subpart E\u2014Wet Process Hardboard Subcategory", "", "\u00a7 429.66 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:32.0.1.1.5.6.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.70 Applicability; description of the wood preserving-water borne or nonpressure subcategory.", "EPA", "", "", "", "This subpart applies to discharges and to the introduction of process wastewater pollutants into publicly owned treatment works from all nonpressure wood preserving treatment processes and all pressure wood preserving treatment processes employing water borne inorganic salts."], ["40:40:32.0.1.1.5.6.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.71 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of reduction attainable by the application of the best practicable control technology (BPT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.6.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.72 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.6.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.73 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.6.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.74 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.6.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.75 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES): There shall be no introduction of process wastewater pollutants into publicly owned treatment works."], ["40:40:32.0.1.1.5.6.3.7", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "F", "Subpart F\u2014Wood Preserving\u2014Water Borne or Nonpressure Subcategory", "", "\u00a7 429.76 Pretreatment standards for new sources (PSNS).", "EPA", "", "", "", "Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS): There shall be no introduction of process wastewater pollutants into publicly owned treatment works."], ["40:40:32.0.1.1.5.7.3.1", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.80 Applicability; description of the wood preserving\u2014steam subcategory.", "EPA", "", "", "", "This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from wood preserving processes that use direct steam impingment on wood as the predominant conditioning method; processes that use the vapor drying process as the predominant conditioning method; direct steam conditioning processes which use the same retort to treat with both salt and oil type preservatives; and steam conditioning processes which apply both salt type and oil type preservatives to the same stock."], ["40:40:32.0.1.1.5.7.3.2", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.81 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).", "EPA", "", "", "", "Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n\nSubpart G\n\n1  Within the range of 6.0 to 9.0 at all times."], ["40:40:32.0.1.1.5.7.3.3", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.82 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.7.3.4", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.83 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). [Reserved]", "EPA", "", "", "", ""], ["40:40:32.0.1.1.5.7.3.5", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.84 New source performance standards (NSPS).", "EPA", "", "", "", "Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters."], ["40:40:32.0.1.1.5.7.3.6", 40, "Protection of Environment", "I", "N", "429", "PART 429\u2014TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY", "G", "Subpart G\u2014Wood Preserving Steam Subcategory", "", "\u00a7 429.85 Pretreatment standards for existing sources (PSES).", "EPA", "", "", "", "Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and meet the following pretreatment standards for existing sources (PSES):\n\nSubpart G\n\n[PSES Effluent Limitations]\n\nIn cases where POTWs find it necessary to impose mass limitations, the following equivalent mass limitations are provided as guidance.\n\n[Grams per cubic meter of production]"]], "truncated": false, "filtered_table_rows_count": 115, "expanded_columns": [], "expandable_columns": [], "columns": ["section_id", "title_number", "title_name", "chapter", "subchapter", "part_number", "part_name", "subpart", "subpart_name", "section_number", "section_heading", "agency", "authority", "source_citation", "amendment_citations", "full_text"], "primary_keys": ["section_id"], "units": {}, "query": {"sql": "select section_id, title_number, title_name, chapter, subchapter, part_number, part_name, subpart, subpart_name, section_number, section_heading, agency, authority, source_citation, amendment_citations, full_text from cfr_sections where \"part_number\" = :p0 and \"title_number\" = :p1 order by section_id limit 101", "params": {"p0": "429", "p1": "40"}}, "facet_results": {"title_number": {"name": "title_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=429&title_number=40", "results": [{"value": 40, "label": 40, "count": 115, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429", "selected": true}], "truncated": false}, "agency": {"name": "agency", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=429&title_number=40", "results": [{"value": "EPA", "label": "EPA", "count": 115, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429&title_number=40&agency=EPA", "selected": false}], "truncated": false}, "part_number": {"name": "part_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=429&title_number=40", "results": [{"value": "429", "label": "429", "count": 115, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?title_number=40", "selected": true}], "truncated": false}}, "suggested_facets": [{"name": "subpart", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429&title_number=40&_facet=subpart"}, {"name": "subpart_name", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429&title_number=40&_facet=subpart_name"}, {"name": "amendment_citations", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429&title_number=40&_facet=amendment_citations"}], "next": "40~3A40~3A32~2E0~2E1~2E1~2E5~2E7~2E3~2E6,40~3A40~3A32~2E0~2E1~2E1~2E5~2E7~2E3~2E6", "next_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=429&title_number=40&_next=40~3A40~3A32~2E0~2E1~2E1~2E5~2E7~2E3~2E6%2C40~3A40~3A32~2E0~2E1~2E1~2E5~2E7~2E3~2E6&_sort=section_id", "private": false, "allow_execute_sql": true, "query_ms": 1301.5190929872915, "source": "Federal Register API & Regulations.gov API", "source_url": "https://www.federalregister.gov/developers/api/v1", "license": "Public Domain (U.S. Government data)", "license_url": "https://www.regulations.gov/faq"}