{"database": "openregs", "table": "cfr_sections", "is_view": false, "human_description_en": "where part_number = 411 and title_number = 40 sorted by section_id", "rows": [["40:40:31.0.1.1.11.1.2.1", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.10 Applicability; description of the nonleaching subcategory.", "EPA", "", "", "", "The provisions of this subpart are applicable to discharges resulting from the process in which several mineral ingredients (limestone or other natural sources of calcium carbonate, silica, alumina, and iron together with gypsum) are used in the manufacturing of cement and in which kiln dust is not contracted with water as an integral part of the process and water is not used in wet scrubbers to control kiln stack emissions."], ["40:40:31.0.1.1.11.1.2.2", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.11 Specialized definitions.", "EPA", "", "", "", "For the purpose of this subpart:\n\n(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart."], ["40:40:31.0.1.1.11.1.2.3", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.", "EPA", "", "", "[39 FR 6591, Feb. 20, 1974, as amended at 60 FR 33950, June 29, 1995]", "Except as provided in \u00a7\u00a7 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):"], ["40:40:31.0.1.1.11.1.2.4", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.", "EPA", "", "", "[44 FR 50741, Aug. 29, 1979]", "The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable."], ["40:40:31.0.1.1.11.1.2.5", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.14 Pretreatment standards for existing sources.", "EPA", "", "", "[40 FR 6440, Feb. 11, 1975, as amended at 60 FR 33951, June 29, 1995]", "Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart."], ["40:40:31.0.1.1.11.1.2.6", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.15 Standards of performance for new sources.", "EPA", "", "", "", "The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:"], ["40:40:31.0.1.1.11.1.2.7", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.16 Pretreatment standards for new sources.", "EPA", "", "", "[60 FR 33951, June 29, 1995]", "Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:31.0.1.1.11.1.2.8", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "A", "Subpart A\u2014Nonleaching Subcategory", "", "\u00a7 411.17 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.", "EPA", "", "", "[44 FR 50741, Aug. 29, 1979]", "The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology."], ["40:40:31.0.1.1.11.2.2.1", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.20 Applicability; description of the leaching subcategory.", "EPA", "", "", "", "The provisions of this subpart are applicable to discharges resulting from the process in which several mineral ingredients (limestone or other natural sources of calcium carbonate, silica, alumina, and iron together with gypsum) are used in the manufacturing of cement and in which kiln dust is contacted with water as an integral part of the process or water is used in wet scrubbers to control kiln stack emissions."], ["40:40:31.0.1.1.11.2.2.2", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.21 Specialized definitions.", "EPA", "", "", "", "For the purpose of this subpart:\n\n(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart."], ["40:40:31.0.1.1.11.2.2.3", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.", "EPA", "", "", "[39 FR 6591, Feb. 20, 1974, as amended at 60 FR 33951, June 29, 1995]", "Except as provided in \u00a7\u00a7 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):"], ["40:40:31.0.1.1.11.2.2.4", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.", "EPA", "", "", "[44 FR 50741, Aug. 29, 1979]", "The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable."], ["40:40:31.0.1.1.11.2.2.5", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.24 Pretreatment standards for existing sources.", "EPA", "", "", "[40 FR 6440, Feb. 11, 1975, as amended at 60 FR 33951, June 29, 1995]", "Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart."], ["40:40:31.0.1.1.11.2.2.6", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.25 Standards of performance for new sources.", "EPA", "", "", "", "The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:"], ["40:40:31.0.1.1.11.2.2.7", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.26 Pretreatment standards for new sources.", "EPA", "", "", "[60 FR 33951, June 29, 1995]", "Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:31.0.1.1.11.2.2.8", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "B", "Subpart B\u2014Leaching Subcategory", "", "\u00a7 411.27 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the conventional pollutant control technology (BCT).", "EPA", "", "", "[51 FR 24999, July 9, 1986]", "Except as provided in \u00a7\u00a7 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in \u00a7 401.16) in \u00a7 411.22 of this subpart for the best practicable control techology currently available (BPT)."], ["40:40:31.0.1.1.11.3.2.1", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.30 Applicability; description of the materials storage piles runoff subcategory.", "EPA", "", "", "", "The provisions of this subpart are applicable to discharges resulting from the runoff of rainfall which derives from the storage of materials including raw materials, intermediate products, finished products and waste materials which are used in or derived from the manufacture of cement under either Subcategory\u2014A or B."], ["40:40:31.0.1.1.11.3.2.2", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.31 Specialized definitions.", "EPA", "", "", "", "For the purpose of this subpart:\n\n(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.\n\n(b) The term  10 year, 24 hour rainfall event  shall mean a rainfall event with a probable recurrence interval of once in ten years as defined by the National Weather Service in Technical Paper No. 40, \u201cRainfall Frequency Atlas of the United States,\u201d May 1961, and subsequent amendments, or equivalent regional or state rainfall probability information developed therefrom."], ["40:40:31.0.1.1.11.3.2.3", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.", "EPA", "", "", "[39 FR 6591, Feb. 20, 1974, as amended at 60 FR 33951, June 29, 1995]", "(a) Except as provided in \u00a7\u00a7 125.30 through 125.32, and subject to the provisions of paragraph (b) of this section, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n\n(b) Any untreated overflow from facilities designed, constructed and operated to treat the volume of runoff from materials storage piles which is associated with a 10-year, 24-hour rainfall event shall not be subject to the pH and TSS limitations stipulated in paragraph (a) of this section."], ["40:40:31.0.1.1.11.3.2.4", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.33 [Reserved]", "EPA", "", "", "", ""], ["40:40:31.0.1.1.11.3.2.5", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.34 Pretreatment standards for existing sources.", "EPA", "", "", "[40 FR 6440, Feb. 11, 1975, as amended at 60 FR 33951, June 29, 1995]", "Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart."], ["40:40:31.0.1.1.11.3.2.6", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.35 Standards of performance for new sources.", "EPA", "", "", "[42 FR 10681, Feb. 23, 1977]", "(a) Subject to the provisions of paragraph (b) of this section the following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:\n\n(b) Any overflow from facilities designed, constructed and operated to treat to the applicable limitations the precipitation and runoff resulting from a 10-year, 24-hour precipitation event shall not be subject to the limitations of this section."], ["40:40:31.0.1.1.11.3.2.7", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.36 Pretreatment standards for new sources.", "EPA", "", "", "[60 FR 33951, June 29, 1995]", "Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403."], ["40:40:31.0.1.1.11.3.2.8", 40, "Protection of Environment", "I", "N", "411", "PART 411\u2014CEMENT MANUFACTURING POINT SOURCE CATEGORY", "C", "Subpart C\u2014Materials Storage Piles Runoff Subcategory", "", "\u00a7 411.37 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.", "EPA", "", "", "[39 FR 6591, Feb. 20, 1974. Redesignated and amended at 44 FR 50741, Aug. 29, 1979]", "The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology.\n\n(a) Subject to the provisions of paragraph (b) of this section, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology.\n\n(b) Any untreated overflow from facilities designed, constructed and operated to treat the volume of runoff from materials storage piles which results from a 10-year, 24-hour rainfall event shall not be subject to the pH and TSS limitations stipulated in paragraph (a) of this section."]], "truncated": false, "filtered_table_rows_count": 24, "expanded_columns": [], "expandable_columns": [], "columns": ["section_id", "title_number", "title_name", "chapter", "subchapter", "part_number", "part_name", "subpart", "subpart_name", "section_number", "section_heading", "agency", "authority", "source_citation", "amendment_citations", "full_text"], "primary_keys": ["section_id"], "units": {}, "query": {"sql": "select section_id, title_number, title_name, chapter, subchapter, part_number, part_name, subpart, subpart_name, section_number, section_heading, agency, authority, source_citation, amendment_citations, full_text from cfr_sections where \"part_number\" = :p0 and \"title_number\" = :p1 order by section_id limit 101", "params": {"p0": "411", "p1": "40"}}, "facet_results": {"title_number": {"name": "title_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=411&title_number=40", "results": [{"value": 40, "label": 40, "count": 24, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411", "selected": true}], "truncated": false}, "agency": {"name": "agency", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=411&title_number=40", "results": [{"value": "EPA", "label": "EPA", "count": 24, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411&title_number=40&agency=EPA", "selected": false}], "truncated": false}, "part_number": {"name": "part_number", "type": "column", "hideable": false, "toggle_url": "/openregs/cfr_sections.json?part_number=411&title_number=40", "results": [{"value": "411", "label": "411", "count": 24, "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?title_number=40", "selected": true}], "truncated": false}}, "suggested_facets": [{"name": "subpart", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411&title_number=40&_facet=subpart"}, {"name": "subpart_name", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411&title_number=40&_facet=subpart_name"}, {"name": "amendment_citations", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411&title_number=40&_facet=amendment_citations"}, {"name": "full_text", "toggle_url": "https://www.pawtectors.org/openregs/cfr_sections.json?part_number=411&title_number=40&_facet=full_text"}], "next": null, "next_url": null, "private": false, "allow_execute_sql": true, "query_ms": 707.8245629090816, "source": "Federal Register API & Regulations.gov API", "source_url": "https://www.federalregister.gov/developers/api/v1", "license": "Public Domain (U.S. Government data)", "license_url": "https://www.regulations.gov/faq"}