section_id,title_number,title_name,chapter,subchapter,part_number,part_name,subpart,subpart_name,section_number,section_heading,agency,authority,source_citation,amendment_citations,full_text 14:14:4.0.1.1.10.0.1.1,14,Aeronautics and Space,II,A,214,"PART 214—TERMS, CONDITIONS, AND LIMITATIONS OF FOREIGN AIR CARRIER PERMITS AUTHORIZING CHARTER TRANSPORTATION ONLY",,,,§ 214.1 Applicability.,FAA,,,"[ER-1223, 46 FR 28379, May 26, 1981]","This part establishes the terms, conditions, and limitations applicable to charter foreign air transportation pursuant to foreign air carrier permits authorizing the holder to engage in charter transportation only." 14:14:4.0.1.1.10.0.1.2,14,Aeronautics and Space,II,A,214,"PART 214—TERMS, CONDITIONS, AND LIMITATIONS OF FOREIGN AIR CARRIER PERMITS AUTHORIZING CHARTER TRANSPORTATION ONLY",,,,§ 214.2 Terms of service.,FAA,,,"[ER-1223, 46 FR 28379, May 26, 1981]",Charter air transportation under this part shall be performed in accordance with the provisions of part 212 of this chapter. 24:24:2.1.1.2.10.1.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,A,Subpart A—General Program Requirements,,§ 214.1 Purpose.,HUD,,,"[81 FR 90657, Dec. 14, 2016]","This part implements the Housing Counseling Program authorized by section 106 of the Housing and Urban Development Act of 1968 (12 U.S.C. 1701x). Section 106 authorizes HUD to make grants to, or contract with, public or private organizations to provide a broad range of housing counseling services to homeowners and tenants to assist them in improving their housing conditions and in meeting the responsibilities of tenancy or homeownership. Section 106 also directs HUD to provide housing counseling services only through agencies or individuals that have been certified by HUD as competent to provide such services. The regulations contained in this part prescribe the procedures and requirements by which the Housing Counseling Program will be administered, including the process by which agencies are approved and individuals will be certified to provide the homeownership and rental counseling, as defined by section 106. These regulations apply to all agencies participating in HUD's Housing Counseling Program, and to all organizations or entities that deliver housing counseling, including homeownership counseling or rental housing counseling, required under or provided in connection with HUD programs." 24:24:2.1.1.2.10.1.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,A,Subpart A—General Program Requirements,,§ 214.3 Definitions.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 81 FR 90658, Dec. 14, 2016; 89 FR 49807, June 12, 2024]","The following definitions apply throughout this part: Action plan. A plan that outlines what the housing counseling agency and the client will do in order to meet the client's housing goals and, when appropriate, addresses the client's housing problem(s). Affiliate. A nonprofit organization participating in the HUD-related Housing Counseling program of a regional or national intermediary, or state housing finance agency. The affiliate organization is incorporated separately from the regional or national intermediary or state housing finance agency. An affiliate is: (1) Duly organized and existing as a tax-exempt nonprofit organization; (2) In good standing under the laws of the state of the organization; and (3) Authorized to do business in the states where it proposes to provide housing counseling services. Branch or branch office. An organizational and subordinate unit of a local housing counseling agency, multi-state organization, regional or national intermediary, or state housing finance agency not separately incorporated or organized, that participates in HUD's Housing Counseling program. A branch or branch office must be in good standing under the laws of the state where it proposes to provide housing counseling services. A branch or branch office cannot be a subgrantee or affiliate. Clients. Individuals or households who seek the assistance of an agency participating in HUD's Housing Counseling program to meet a housing need or resolve a housing problem. Counseling. Counselor to client assistance that addresses unique financial circumstances or housing issues and focuses on ways of overcoming specific obstacles to achieving a housing goal such as repairing credit, addressing a rental dispute, purchasing a home, locating cash for a down payment, being informed of fair housing and fair lending requirements of the Fair Housing Act, finding units accessible to persons with disabilities, avoiding foreclosure, or resolving a financial crisis. Except for reverse mortgage counseling, all counseling shall involve the creation of an action plan. Education. Formal classes, with established curriculum and instructional goals provided in a group or classroom setting, covering topics applicable to groups of people such as, but not limited to: (1) Renter rights; (2) The homebuying process; (3) How to maintain a home; (4) Budgeting; (5) Fair housing; (6) Identifying and reporting predatory lending practices; (7) Rights for persons with disabilities; and (8) The importance of good credit. Homeownership counseling. See definition at 24 CFR 5.100. Housing counseling. See definition at 24 CFR 5.100. Housing counseling grant funds. Grants awarded to participating agencies under section 106 of the Housing and Urban Development Act of 1968 (12 U.S.C. 1701x). Housing counseling work plan. A participating agency's plan to provide housing counseling activities and services in a specified geographic area to resolve or mitigate identified community needs and problems. The plan will also describe the objectives of the agency and the resources available to meet those objectives. An intermediary's state housing finance agency's (SHFA) or multistate organization's (MSO) plan includes similar information regarding the services they propose to provide to the network of affiliated agencies or branches participating in their HUD-related Housing Counseling program. Housing goal. A realistic, short- or long-term objective set by the client, with advice from a housing counselor. HUD-approved housing counseling agency. Private and public nonprofit organizations that are exempt from taxation under section 501(a), pursuant to section 501(c) of the Internal Revenue Code of 1996, 26 U.S.C. 501(a) and 501(c) and approved by HUD, in accordance with this part and 106(e) of the Housing and Urban Development Act of 1968 (12 U.S.C. 1701x(e)), to provide housing counseling services to clients directly, or through their affiliates or branches, and which meet the requirements set forth in this part. HUD certified housing counselor. A housing counselor who has passed the HUD Certification examination, works for a participating agency, and is certified by HUD as competent to provide housing counseling services pursuant to this part. HUD-certified Tribal housing counselor. A housing counselor who has passed the HUD Certification examination as described in subpart F of this part, works for an Indian Tribe, Tribally designated housing entity (TDHE), or other Tribal entity, and is certified by HUD as competent to provide housing counseling services pursuant to subpart F of this part. Intermediary. A HUD-approved organization that provides housing counseling services indirectly through its branches or affiliates, for whom it exercises control over the quality and type of housing counseling services rendered. The Housing Counseling program recognizes two types of intermediaries, which include: (1) National intermediary. A national intermediary provides, in multiple regions of the United States: (i) Housing counseling services through its branches or affiliates or both; and (ii) Administrative and supportive services to its network of affiliates or branches, including, but not limited to, pass-through funding, training, and technical assistance. (2) Regional intermediary. A regional intermediary provides in a generally recognized region within the United States, such as the Southwest, Mid-Atlantic, New England: (i) Housing counseling services through its branches or affiliates or both; and (ii) Administrative and supportive services to its network of affiliates, or branches, including, but not limited to, pass-through funding, training, and technical assistance. Local housing counseling agency (LHCA). A housing counseling agency that directly provides housing counseling services. An LHCA may have a main office, and one or more branch offices, in no more than two contiguous states. Multi-state organization (MSO). A multi-state organization provides housing counseling services through a main office and branches in two or more states. Nonprofit organization. Shall have the meaning given in section 104(5) of the Cranston-Gonzalez National Affordable Housing Act (42 U.S.C. 12704(5)), except that subparagraph (D) of such section shall not apply. Participating agency. Participating agencies are all housing counseling and intermediary organizations participating in HUD's Housing Counseling program, including HUD-approved agencies, and affiliates and branches of HUD-approved intermediaries, HUD-approved MSOs, and state housing finance agencies. Rental housing counseling. See definition at 24 CFR 5.100. Reverse mortgage. A mortgage that pays a homeowner loan proceeds drawn from accumulated home equity and that requires no repayment until a future time. State. Each of the several States, the Commonwealth of Puerto Rico, the District of Columbia, the Commonwealth of the Northern Mariana Islands, Guam, the Virgin Islands, American Samoa, or any other possession of the United States. State housing finance agency (SHFA). Any public body, agency, or instrumentality created by a specific act of a state legislature empowered to finance activities designed to provide housing and related facilities through land acquisition, construction, or rehabilitation throughout an entire state. SHFAs may provide direct counseling services or subgrant housing counseling funds, or both, to affiliated housing counseling agencies within the SHFA's state. “State” includes the several states, Puerto Rico, the District of Columbia, Guam, the Commonwealth of the Northern Mariana Islands, American Samoa, and the U.S. Virgin Islands. Subgrantee. An affiliate of a HUD-approved intermediary or SHFA that receives a subgrant of housing counseling funds provided under a HUD grant. Tribally designated housing entity. See definition at 25 U.S.C. 4103. Unit of general local government. Any city, county, parish, town, township, borough, village, or any other general purpose political subdivision of a State." 24:24:2.1.1.2.10.2.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,B,Subpart B—Approval and Disapproval of Housing Counseling Agencies,,§ 214.100 General.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 81 FR 90658, Dec. 14, 2016]","An organization may be approved by HUD as a HUD-approved housing counseling agency upon meeting the requirements of § 214.103 and upon completing the application procedures set forth in this subpart B. (a) Approval. The approval of a housing counseling agency and the certification of a HUD certified housing counselor does not create or imply a warranty or endorsement by HUD of the approved agency, or its employees, including counselors, to a prospective client or to any other organization or individual, nor does it represent a warranty of any housing counseling provided by the agency or a HUD certified housing counselor working for an agency. Approval means only that the agency has met the qualifications and conditions prescribed by HUD, and a HUD certified housing counselor only means the housing counselor has successfully passed an examination pursuant to these regulations and works for a participating agency. (b) Effective date. Agencies approved by HUD on or before October 29, 2007 and agencies that have submitted applications to HUD on or before September 28, 2007 and that are subsequently approved, are required to be in full compliance with the requirements in this part on October 1, 2007. Agencies approved after October 29, 2007 must comply with this part." 24:24:2.1.1.2.10.2.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,B,Subpart B—Approval and Disapproval of Housing Counseling Agencies,,§ 214.103 Approval criteria.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 80 FR 75936, Dec. 7, 2015; 81 FR 90658, Dec. 14, 2016; 85 FR 47303, Aug. 5, 2020; 89 FR 75501, Sept. 16, 2024]","The following criteria for approval apply to all agencies, MSOs, and intermediaries, including all local housing counseling agencies, branches, and affiliates that are included in one application: (a) Nonprofit and tax-exempt status. A housing counseling agency must function as a private or public nonprofit organization, or be a unit of local, county, or state government. The agency must submit evidence of nonprofit status and tax-exempt status under section 501(a), pursuant to section 501(c) of the Internal Revenue Code of 1996 (26 U.S.C. 501(a) and (c)). Units of local, county, or state government must submit proof of their authorization to provide housing counseling services. (b) Experience. An agency must have successfully administered a Housing Counseling program for at least one year. An intermediary must have operated in an intermediary capacity for at least one year. To be considered part of an LHCA's, MSO's, or intermediary's approval application, and to participate in the HUD-approved portion of the intermediary's, SHFA's, or MSO's Housing Counseling program, affiliates and branches must have successfully administered a Housing Counseling program for at least one year. (c) Ineligible participants. An agency, including any of the agency's directors, partners, officers, principals, or employees, must not be: (1) Suspended, debarred, or otherwise restricted under the Department's, or any other federal regulations; (2) Indicted for, or convicted of, a criminal offense that reflects upon the responsibility, integrity, or ability of the agency to participate in housing counseling activities. These offenses include criminal offenses that can be prosecuted at a local, state, or federal level; (3) Subject to unresolved findings as a result of HUD or other government audit or investigations. (d) Community base. A housing counseling agency and its HUD Program branches and affiliates must have functioned for at least one year in the geographical area(s) the agency set forth in its housing counseling work plan. (e) Recordkeeping and reporting. The agency must have an established system of recordkeeping so that client files, electronic and paper, can be reviewed and annual activity data for the agency can be verified, reported, and analyzed. Client files, both electronic and paper, must be kept confidential, in accordance with § 214.315. This system must meet the requirements of 2 CFR part 200, subpart D, 24 CFR 1.6, and 24 CFR part 121 and can be easily accessible to HUD for all monitoring and audit purposes. (f) Client management system. All participating agencies shall utilize an automated housing counseling client management system for the collection and reporting of client-level information, including, but not limited to, financial and demographic data, counseling services provided, and outcomes data. The system used must provide the counseling agency with the tools necessary to track and manage all counseling and educational activities associated with each client. Agencies must utilize a Client Management System that satisfies HUD's requirements and interfaces with HUD's databases. (g) Housing counseling resources. The agency must have the following resources sufficient to implement the proposed housing counseling work plan no later than the date of HUD approval: (1) Funding. The application for approval must provide evidence of funds immediately available, or written commitment for funds to cover the cost of operating the housing counseling work plan during the initial 12-month period of HUD approval. (2) Staff. The agency must employ staff trained in housing counseling. All staff providing housing counseling, including homeownership counseling or rental housing counseling, must be HUD certified housing counselors, and at least half the agency's counselors must have at least 6 months of experience in the job they will perform in the agency's housing counseling program. (3) Language skills. The agency must have housing counselor(s) who are fluent in the language of the clients they serve, or the housing counseling agency must use the services of an interpreter, or the agency must refer the client to another agency that can meet the client's needs. (h) Knowledge of HUD programs and local housing market. The agency's housing counseling staff must possess a working knowledge of HUD's housing and single-family mortgage insurance programs, other state and local housing programs available in the community, consolidated plans, and the local housing market. The staff should be familiar with housing programs offered by conventional mortgage lenders and other housing or related programs that may assist their clients. (i) Contracts or agreements to provide eligible housing counseling services. An agency and its branches or subgrantees or affiliates must deliver all of the housing counseling activities set forth in the agency's housing counseling work plan. It is not permissible to contract out housing counseling services, except: (1) In geographic areas where a need for housing counseling services is demonstrated and no HUD-approved housing counseling agency or its branches, affiliates, or subgrantees exists. Under this exception, the contract must delineate the respective Housing Counseling program responsibilities of the contracting parties, the agency providing services (contractor) must meet the HUD approval eligibility standards, and the contracting agency must receive prior written approval from HUD. (2) Intermediaries and SHFAs may enter into agreements with affiliates to provide housing counseling services. The agreements with affiliates may be in the form of an exchange of letters that delineate the respective Housing Counseling program responsibilities of the parties. Agreements must be sufficiently detailed to establish accountability and allow for adequate monitoring in accordance with 2 CFR part 200. (3) With prior approval from HUD, and at HUD's discretion, intermediary organizations may operate a Housing Counseling program with a network of affiliated counselors, rather than affiliated counseling agencies, if the structure is designed to meet a special housing counseling need identified by HUD. (j) Community resources. The housing counseling agency must have established working relationships with private and public community resources to which it can refer clients who need help the agency cannot offer, including agencies offering similar or related services to non-English speaking clients. (k) State and local requirements. An agency and its branches and affiliates must meet all state and local requirements for its operation. (l) Facilities. All participating agencies must maintain at least one facility. All facilities must meet the following criteria: (1) Have a clearly identified space available for the provision of housing counseling services; (2) Provide privacy for counseling services and confidentiality of client records; and (3) Provide accessibility features or make alternative accommodations for persons with disabilities, in accordance with section 504 of the Rehabilitation Act of 1973 (29 U.S.C. 794), 24 CFR parts 8 and 9, and the Americans with Disabilities Act (42 U.S.C. 12101 et seq. ). (m) Housing counseling work plan. (1) The agency must submit a detailed yet concise housing counseling plan that explains: The needs and problems of the target population; how the agency will address one or more of these needs and problems with its available resources; the type of housing counseling services offered; fee structure, if applicable; the geographic service area to be served; and the anticipated results (outcomes) to be achieved within the period of approval. (2) The plan must be periodically reviewed and, when changed or amended, the agency must notify and provide a copy to HUD. (3) The plan must meet the basic requirements described in § 214.300. (4) An agency's housing counseling work plan must also address, if appropriate, alternative settings and formats for the provision of housing counseling services. (n) Certification of housing counselors. (1) In order for an agency to participate in HUD's Housing Counseling Program, all individuals who provide counseling, including homeownership and rental housing counseling, must be HUD certified according to requirements in this section. (2) For an individual to become a HUD certified counselor, an individual must pass a standardized written examination to demonstrate competency in each of the following areas: (i) Financial management; (ii) Property maintenance; (iii) Responsibilities of homeownership and tenancy; (iv) Fair housing laws and requirements; (v) Housing affordability; and (vi) Avoidance of, and response to, rental or mortgage delinquency and avoidance of eviction or mortgage default. (3) HUD will certify an individual housing counselor who has met the requirements of paragraph (n)(1) of this section upon verification that the individual works for a participating agency. (4) Participating agencies and housing counselors must be in compliance with requirements of paragraph (n) of this section as of August 1, 2021." 24:24:2.1.1.2.10.2.155.3,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,B,Subpart B—Approval and Disapproval of Housing Counseling Agencies,,§ 214.105 Preliminary application process.,HUD,,,,"(a) Submission. All agencies must complete the forms prescribed by HUD and submit the application and all supporting documentation to HUD. Agencies with branches or affiliates for which the parent entity exercises control over the quality and type of housing counseling services rendered must submit a single application for approval. (b) Notwithstanding paragraph (a), SHFAs are not required to submit an application for HUD approval. However, to participate in HUD's Housing Counseling program, SHFAs must either submit a request and provide HUD with a list of affiliates, if applicable, and assure that they meet all program requirements, or submit a request through such other application procedure as HUD may periodically announce in the Federal Register or other informational sources." 24:24:2.1.1.2.10.2.155.4,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,B,Subpart B—Approval and Disapproval of Housing Counseling Agencies,,§ 214.107 Approval by HUD.,HUD,,,,"(a) Notice of approval. If an application package meets all requirements outlined in § 214.103, HUD will approve an agency for a period of up to 3 years. HUD will advise the agency of its approval in the form of an approval letter to the agency's main office. (b) Certificate of Approval. HUD will issue a “Certificate of Approval” to the approved agency. The certificate will show the period of approval. (c) Appearance on list of HUD-approved and participating housing counseling agencies. For purposes of client referrals, participating agencies that provide housing counseling services directly to clients must provide HUD with the agency name and contact information, which may appear on HUD's Web site. In addition, names and addresses of all participating agencies that provide housing counseling services directly may be made available to the public through HUD's toll-free housing counseling hotline." 24:24:2.1.1.2.10.2.155.5,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,B,Subpart B—Approval and Disapproval of Housing Counseling Agencies,,§ 214.109 Disapproval by HUD.,HUD,,,,"If an application package does not meet all requirements in § 214.103, HUD will provide the agency with the reasons for the denial in writing. Within 30 calendar days of the written notice of denial, the agency may submit a revised application, or appeal HUD's decision in writing to HUD, as provided in § 214.205. If an agency decides to submit a revised application, the agency may consult HUD, to determine the specific actions needed to resolve the deficiencies." 24:24:2.1.1.2.10.3.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,C,"Subpart C—Inactive Status, Termination, and Appeals",,§ 214.200 Inactive status.,HUD,,,,"(a) HUD may change a participating agency's status to inactive, in lieu of terminations of HUD-approved status or removals from the list of HUD-approved agencies, under certain circumstances that may temporarily impair an agency from complying with its housing counseling plan. An agency's status may be changed to inactive on a case-by-case basis for a period not to exceed 6 months, unless an extension is provided by HUD under paragraph (d) of this section. HUD may change an agency's status through either a request submitted to HUD or as a result of information obtained by the Department. Some of the conditions under which inactive status may be considered include, but are not limited to: (1) Loss of counselor(s); (2) Damage to facilities by natural disasters that renders the agency unable to function properly; (3) Loss of funds; (4) Relocation; (5) Other circumstances caused by reasons beyond the agency's control; or (6) Results of performance review. (b) Agencies that seek temporary inactive status must submit a request to HUD in writing. Documentation or evidence of the condition(s) that rendered the agency incapable of carrying out its housing counseling plan must be submitted along with the request, if possible. Upon receipt of the request, HUD will review and notify the agency of approval or rejection, in writing. If approved, the agency's name and contact information will be temporarily removed from the HUD-approved Web list of agencies and the telephone referral system. (c) The agency must notify HUD in writing and provide supporting documentation or evidence when it is ready to resume operation, or no later than the end of the inactive period. After review and acceptance by HUD, the agency's contact information may be restored to the Web list of HUD-approved and participating agencies and the telephone referral system. (d) At HUD's discretion, if the condition(s) still exists, an extension of the inactive period may be considered or the agency may be terminated or removed from the Housing Counseling program. HUD will notify the agency in writing of its decision." 24:24:2.1.1.2.10.3.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,C,"Subpart C—Inactive Status, Termination, and Appeals",,§ 214.201 Termination of HUD-approved status and grant agreements.,HUD,,,,"(a) Cause for termination by HUD. HUD may terminate an agency's approval; remove an SHFA; remove one or more branches or affiliates from the HUD portion of an intermediary's, MSO's, or SHFA's counseling program; and terminate any grant agreements (if applicable) upon confirmation of any of the following reasons: (1) Noncompliance with program requirements; (2) Failure to implement in whole or in part the agency's approved housing counseling work plan or failure to notify HUD of changes in the agency's housing counseling work plan; (3) Lack of the capacity to deliver the housing counseling activities described in its approved housing counseling work plan; (4) Failure to achieve outcomes described in the work plan; (5) Misuse of grant funds; or (6) HUD determines that there is good cause. (b) Agency withdrawal. The participating agency may withdraw from the Housing Counseling program at any time. (c) Post-termination, post-withdrawal requirements. All terminations by HUD, or an agency's withdrawal, must be in writing. When a termination or withdrawal occurs, the agency must return to HUD any unexpired “Certificate of Approval.” A terminated or inactive agency cannot continue to display the certificate. If HUD has determined that an agency will be terminated from participating in the Housing Counseling program, and an agency does not voluntarily withdraw, then HUD may follow the provisions found in 24 CFR part 24." 24:24:2.1.1.2.10.3.155.3,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,C,"Subpart C—Inactive Status, Termination, and Appeals",,§ 214.203 Re-approval or removal as a result of a performance review.,HUD,,,,"HUD may conduct a periodic performance review for all agencies participating in the Housing Counseling program. The performance review and the terms of re-approval or removal of a participating agency are described in § 214.307 and § 214.309. At the end of the approval period, and upon completion of a successful performance review, if conducted, HUD will reapprove agencies." 24:24:2.1.1.2.10.3.155.4,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,C,"Subpart C—Inactive Status, Termination, and Appeals",,§ 214.205 Appeals.,HUD,,,,"An agency making an application for approval, or an approved agency seeking reapproval, shall have the right to appeal any adverse decisions rendered by HUD under this part: (a) Appeal must be in writing. An agency may make a formal written appeal to HUD. (b) Timeliness. HUD must receive an appeal within 30 days of the date of the HUD decision letter to the applicant agency. HUD is not bound to review appeals received after this 30-calendar day period. (c) Other action. Nothing in this section prohibits HUD from taking such other action against an agency as provided in 24 CFR part 24, or from seeking any other remedy against an agency available to HUD by statute or otherwise." 24:24:2.1.1.2.10.4.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.300 Counseling services.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 81 FR 90658, Dec. 14, 2016; 89 FR 75502, Sept. 16, 2024]","(a) Basic requirements. (1) Agencies must provide counseling to current and potential homeowners and tenants to assist them in improving their housing conditions and in meeting the responsibilities of homeownership or tenancy. (2) Except for reverse mortgage counseling, housing counselors and clients must establish an action plan for each counseling client. (3) Counseling may take place at the housing counseling agency facility or at an alternate location, and may be conducted by telephone, or via collaborative online software. Agencies must ensure that any telephonic or collaborative online software, or any form of counseling, is accessible for persons with disabilities, in accordance with section 504 of the Rehabilitation Act of 1973 (29 U.S.C. 794), 24 CFR parts 8 and 9, and the Americans with Disabilities Act (42 U.S.C. 12101 et seq. ). All agencies participating in HUD's Housing Counseling program must, upon a client's request, refer clients to participating agencies that provide in-person counseling services in accordance with § 214.303(e). (4) Regardless of setting or format, all participating agencies must continue to meet the requirements of § 214.103(d), 214.103(g), and 214.103(h). (5) Regardless of setting or format, counseling activities must be limited to the geographic area specified in the agency's approved housing counseling work plan. (6) With prior approval from HUD, a network of affiliated counselors or a HUD roster of counselors, designed to meet a special housing counseling need, may be permitted to provide specified types of counseling nationally. (7) All participating agencies that offer group educational sessions must also offer individual counseling on the same topics covered in the group educational sessions. (8) All participating agencies that provide homeownership counseling, shall address the entire process of homeownership, including, but not limited to, the decision to purchase a home, the selection and purchase of a home, the home inspection process, issues arising during or affecting the period of ownership of a home (including, but not limited to, financing, refinancing, default, and foreclosure, and other financial decisions), and the sale or other disposition of a home. (9) All participating agencies that provide rental housing counseling shall address issues related to the rental of residential property, which may include counseling regarding future homeownership opportunities, the decision to rent, responsibilities of tenancy, affordability of renting, and eviction prevention. (10) As part of the homeownership counseling process, participating agencies shall provide clients with such materials as HUD may require regarding the availability and importance of obtaining an independent home inspection. (b) Counseling services. For each client, all agencies participating in HUD's Housing Counseling program shall offer the following basic services: (1) Housing counseling, on at least one of the topics described in paragraph (d) of this section, that enables a client to make informed and reasonable decisions to achieve his or her housing goal. (2) Referrals to local, state, and federal resources. (c) Follow-up. Make a reasonable effort to have follow-up communication with the client, when possible, to assure that the client is progressing toward his or her housing goal, to modify or terminate housing counseling, and to learn and report outcomes. (d) Agency's housing counseling work plan. (1) A participating agency shall deliver housing counseling services consistent with the agency's housing counseling work plan. The work plan should identify housing counseling services to be provided in response to one or more of the needs in targeted communities and geographic areas where the agency and its branches and affiliates provide their housing counseling services. (2) Participating agencies may also conduct marketing and outreach, including, but not limited to, providing general information about housing opportunities, conducting information campaigns, and raising awareness about critical housing topics such as predatory lending and fair housing topics. (e) Approved housing counseling, education, and outreach topics. The following are examples of approved housing counseling, education, and outreach topics that participating agencies may provide to and discuss with clients: (1) Prepurchase/homebuying, including, but not limited to: Advice regarding readiness and preparation, Federal Housing Administration-insured financing, housing selection and mobility, search assistance, fair housing and predatory lending, budgeting and credit, loan product comparison, purchase procedures, and closing costs; (2) Resolving or preventing mortgage delinquency, including, but not limited to: Default and foreclosure, loss mitigation, budgeting, and credit; (3) Home maintenance and financial management for homeowners, including, but not limited to: Escrow funds, budgeting, refinancing, home equity, home improvement, utility costs, energy efficiency, rights and responsibilities of home owners, and reverse mortgages; (4) Rental topics, including, but not limited to: HUD rental and rent subsidy programs; other federal, state or local assistance; fair housing; housing search assistance; landlord tenant laws; lease terms; rent delinquency; and (5) Homeless assistance, including, but not limited to: Information regarding emergency shelter, other emergency services, and transitional housing." 24:24:2.1.1.2.10.4.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.303 Performance criteria.,HUD,,,,"To maintain HUD-approved status, a participating agency must meet the following requirements: (a) Approval status. Agencies must continue to comply with approval requirements in § 214.103. (b) Workload. During each 12-month period, the participating agency must provide housing counseling to at least 30 clients. Agencies that offer only housing counseling services limited to reverse mortgages, including home equity conversion mortgages (HECMs), are exempt from this requirement. (c) Reporting. The agency must submit to HUD complete, accurate, and timely activity reports, as described in § 214.317. (d) Agency's housing counseling work plan. The agency must implement the housing counseling work plan and demonstrate reasonable achievement of the outcome objectives approved by HUD, as described in § 214.103(k). (e) Client referrals from HUD and other participating agencies. Except as described in this paragraph, all clients who contact the agency as a result of these referrals must be served. In cases where the agency does not offer the unique services requested by the client or does not have sufficient resources, the agency must refer the client to another participating agency, preferably in the area, or, failing the availability of a participating agency, must make a reasonable effort to refer the client to another agency, that can help the client meet his or her needs. (f) Conflicts of interest. (1) A director, employee, officer, contractor, or agent of a participating agency shall not engage in activities that create a real or apparent conflict of interest. Such a conflict would arise if the director, employee, officer, contractor, agent, his or her spouse, child, general partner, or organization in which he or she serves as employee (other than with the participating counseling agency), or with whom he or she is negotiating future employment, has a direct interest in the client as a landlord, broker, or creditor, or originates, has a financial interest in, services, or underwrites a mortgage on the client's property, owns or purchases a property that the client seeks to rent or purchase, or serves as a collection agent for the client's mortgage lender, landlord, or creditor. (2) A director, employee, officer, contractor, or agent of a participating agency shall not refer clients to mortgage lenders, brokers, builders, or real estate sales agents or brokers in which the officer, employee, director, his or her spouse, child, or general partner has a financial interest, neither may they acquire the client's property from the trustee in bankruptcy or accept a fee or any other consideration for referring a client to mortgage lenders, brokers, builders, or real estate sales agents or brokers. (3) A director, employee, officer, contractor, or agent of a participating agency or any member of his or her immediate family shall avoid any action that might result in, or create the appearance of, administering the housing counseling operation for personal or private gain; providing preferential treatment to any organization or person; or undertaking any action that might compromise the agency's ability to ensure compliance with the requirements of this part and to serve the best interests of its clients. (4) HUD may investigate agency practices and may take action to inactivate or terminate the agency's approval or participation in the Housing Counseling program. (5) Participating agencies must notify HUD of conflicts of interest not later than 15 calendar days after the conflict occurred and report to HUD on the corrective action taken to cure the immediate, and avoid future, conflicts. (g) Disclosure requirements. A participating agency must provide to all clients a disclosure statement that explicitly describes the various types of services provided by the agency and any financial relationships between this agency and any other industry partners. The disclosure must clearly state that the client is not obligated to receive any other services offered by the organization or its exclusive partners. Furthermore, the agency must provide information on alternative services, programs, and products. (h) Staff and supervision. The agency must employ staff trained in housing counseling, and at least half the counselors must have at least 6 months of experience in the job they will perform in the agency's Housing Counseling program. Supervisors of the housing counselors must periodically monitor the work of the housing counselors by reviewing client files with the housing counselor to determine the adequacy and effectiveness of the housing counseling. The agency must document these monitoring activities and make the documentation available to HUD upon request. (i) Funding. The agency must maintain a level of funds that enables it to provide housing counseling to at least the required workload of clients every year, whether or not the agency receives HUD funding." 24:24:2.1.1.2.10.4.155.3,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.305 Agency profile changes.,HUD,,,,"Participating agencies must notify HUD within 15 days when any of the following occurs: (a) The agency loses or changes its tax-exempt, nonprofit status. (b) The agency no longer complies with local and state requirements. (c) Changes occur in any of the items below: (1) Address(es) of the agency's main office and the address(es) of its branches and affiliates; (2) Staff personnel responsible for the Housing Counseling program, such as the housing counselors and management staff; (3) Telephone numbers of the main office, affiliates, and branches; or (4) Any other aspect of the agency's purpose or functions that may impair its ability to comply with these regulations or the applicable grant agreement (e.g., lack of qualified housing counselors)." 24:24:2.1.1.2.10.4.155.4,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.307 Performance review.,HUD,,,,"(a) HUD may conduct periodic on-site or desk performance reviews of all participating agencies. (b) The performance review will consist of a review of the participating agency's compliance with all program requirements, including applicable civil rights requirements, and the agency's level of success in delivering counseling services." 24:24:2.1.1.2.10.4.155.5,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.309 Reapproval and disapproval based on performance review.,HUD,,,,"Based on the performance review, HUD may determine whether to renew the approval unconditionally or conditionally, temporarily change status to inactive, or terminate approval or participation of the agency. (a) Unconditional Reapproval. If the agency is in full compliance with the performance criteria of this part, HUD may reapprove the agency unconditionally for up to 3 years. (b) Conditional Reapproval. If the agency fails to meet the performance criteria, but the failure does not seriously impair the agency's counseling capability as required in this part, HUD may extend the agency's approval or participation for up to 120 calendar days. (c) Inactive status. HUD may temporarily change an agency's status to inactive, as provided in § 214.200. (d) Follow-up Review. HUD may conduct a follow-up review to determine if the deficiencies have been corrected. (e) Termination of HUD Approval. When HUD determines that the agency's program deficiencies seriously impair the agency's ability to comply with this part, HUD may terminate approval or participation of the agency immediately. (f) Appeal. If HUD does not reinstate the approval, or terminates participation, the agency may file an appeal, as prescribed under § 214.205." 24:24:2.1.1.2.10.4.155.6,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.311 Housing counseling grant funds.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 81 FR 90658, Dec. 14, 2016]","(a) HUD housing counseling grant funds. HUD approval or program participation does not guarantee housing counseling grant funding. Funding for the Housing Counseling Program depends on appropriations from Congress, and are awarded competitively under Federal and HUD regulations and policies governing assistance programs, including the Department of Housing and Urban Development Reform Act of 1989 (42 U.S.C. 3545 et seq. ). If housing counseling grant funds become available that are to be competitively awarded, HUD will notify the public through a Notice of Funding Availability (NOFA) in the Federal Register and by the Internet or other electronic media. (b) Local funding sources. HUD recommends that approved agencies seek and secure funding from funding sources that may include local and state governments, private foundations, and lending or real estate organizations. Agencies must assure that such arrangements do not violate the provisions regarding conflicts of interest described in § 214.303(e). (c) Limitation on distribution of funds. No housing counseling funds made available under the Housing Counseling Program shall be distributed to: (1)(i) Any organization that has been convicted for a violation under Federal law relating to an election for Federal office or any organization that employs applicable individuals. For the purposes of this section, applicable individual means an individual who is: (A) Employed by the organization in a permanent or temporary capacity; (B) Contracted or retained by the organization; or (C) Acting on behalf of, or with the express or apparent authority of, the organization; and (D) Has been convicted for a violation under Federal law relating to an election for Federal office. (ii) For the purposes of this paragraph (c)(1), a violation under Federal law relating to an election for Federal office includes, but is not limited to, a violation of one or more of the following statutory provisions related to Federal election fraud, voter intimidation, and voter suppression: 18 U.S.C. 241-242, 245(b)(1)(A), 592-611, and 42 U.S.C. 1973. (2) A participating agency that provides housing counseling through housing counselors who are not HUD certified housing counselors in accordance with § 214.103(n). (d) Misuse of housing counseling grant funds. If any participating agency that receives housing counseling grant funds under the Housing Counseling Program is determined by HUD to have used those housing counseling grant funds in a manner that constitutes a material violation of applicable statutes and regulations, or any requirements or conditions under which such funds were provided: (1) HUD shall require that, within 12 months after the date of the determination of such misuse, the agency shall reimburse HUD for such misused amounts and return to HUD any such amounts that remain unused or unobligated for use; and (2) Such agency shall be ineligible, at any time after the date of such determination of material misuse, to apply for or receive further funds under the Housing Counseling Program. (3) The remedies under paragraph (d) of this section are in addition to any other remedies that may be available under law." 24:24:2.1.1.2.10.4.155.7,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.313 Housing counseling fees.,HUD,,,,"(a) Participating agencies may charge reasonable and customary fees for housing education and counseling services, as long as the cost does not create a financial hardship for the client. An agency's fee schedule must be posted in a prominent place that is easily viewed by clients, and be available to HUD for review. (b) Agencies must inform clients of the fee structure in advance of providing services. Clients cannot be charged for client intake. (c) If any agency chooses to charge fees, the agency must conform to the following guidelines: (1) Provide counseling without charge to persons who cannot afford the fees; (2) Fees must be commensurate with the level of services provided; (3) Agencies may not impose fees upon clients for the same portion of or for an entire service that is already funded with HUD grant funds. (d) The agency may also be reimbursed from clients for the direct cost of obtaining copies of clients' credit reports from credit reporting bureaus if this does not cause a hardship for the client. In cases where the participating agency receives a discount for the cost of credit reports, this discount must be passed on to the client. (e) Lenders may pay agencies for counseling services, through a lump sum or on a case-by-case basis, provided the level of payment does not exceed a level that is commensurate with the services provided, and is reasonable and customary for the area, and does not violate requirements under the Real Estate Settlement Procedures Act (12 U.S.C. 2601 et seq. ). These transactions and relationships must be disclosed to the client as required in § 214.303(g)." 24:24:2.1.1.2.10.4.155.8,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.315 Recordkeeping.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 80 FR 75936, Dec. 7, 2015]","(a) Recordkeeping system. Each participating housing counseling agency must maintain a recordkeeping system. The system must permit HUD to easily access all information needed for a performance review. This system must meet the requirements of 2 CFR part 200, subpart D, 24 CFR 1.6, and 24 CFR part 121. (b) File retention requirements. Financial records, supporting documents, statistical records and all other pertinent records, both electronic and on paper, shall be retained for a period of 3 years from the date the case file was terminated for housing counseling. If the housing counseling agency is a recipient of a HUD housing counseling grant, then the client files for the housing counseling grant year must be retained for 3 years from the date the final grant invoice was paid by HUD. (c) Grant activities. Recipients of HUD housing counseling grants are required to report activities under the grant in a format acceptable to HUD and within the designated time frames required by the applicable grant agreement. (d) Race, ethnicity, and income data. Participating agencies must maintain current and accurate data on the race, ethnicity, and income of their counseling clients and education participants. (e) Client file. The housing counseling agency must maintain a separate confidential file for each counseling client to document the action plan and the services provided to the client, as described in § 214.300. For all counseling, except for HECM counseling, the client file must include an action plan. The client file may be for an individual or household or for a group of clients with the same housing need. (f) Group education file. The housing counseling agency must maintain a separate confidential file for each course provided. This file must contain a list of all participants, their race, ethnicity and income data, course title, course outline, instructors, and date of each course. (g) Confidentiality. Participating agencies must ensure the confidentiality of each client's personal and financial information, including credit reports, whether the information is received from the client or from another source. Failure to maintain the confidentiality of, or improper use of, credit reports may subject the agency to penalties under the Fair Credit Reporting Act (14 U.S.C. 1681 et seq. ). (h) Termination of services. The housing counseling agency must document in the client's file termination of housing counseling. Termination occurs or may occur under any of these conditions: (1) The client meets his or her housing need or resolves the housing problem; (2) The agency determines that further housing counseling will not meet the client's housing need or resolve the client's housing problem; (3) The agency attempts to, but is unable to, locate the client; (4) The client does not follow the agreed-upon action plan; (5) The client otherwise terminates housing counseling; or (6) The client fails to appear for housing counseling appointments." 24:24:2.1.1.2.10.4.155.9,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,D,Subpart D—Program Administration,,§ 214.317 Reporting.,HUD,,,,"All participating agencies shall submit to HUD activity reports, which may be required up to quarterly. The reports must be submitted in the format, by the deadline, and in the manner prescribed by HUD. Participating agencies that are also recipients of HUD grants or subgrants may be required to submit additional reports, as described in their grant agreements and prescribed by HUD." 24:24:2.1.1.2.10.5.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,E,Subpart E—Other Federal Requirements,,§ 214.500 Audit.,HUD,,,"[72 FR 55648, Sept. 28, 2007, as amended at 80 FR 75936, Dec. 7, 2015]","Housing counseling grant recipients and subrecipients shall be subject to the audit requirements contained in 2 CFR part 200, subpart F. HUD must be provided a copy of the audit report within 30 days of completion." 24:24:2.1.1.2.10.5.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,E,Subpart E—Other Federal Requirements,,§ 214.503 Other requirements.,HUD,,,,"In addition to the requirements of this part, the Housing Counseling program is subject to applicable federal requirements in 24 CFR 5.105." 24:24:2.1.1.2.10.6.155.1,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,F,Subpart F—Certification of Tribal Housing Counselors,,§ 214.600 Tribal housing counselor certification.,HUD,,,,"(a) This subpart applies only to housing counseling required under or provided in connection with the Indian Housing Block Grant (IHBG) program or the Indian Community Development Block Grant (ICDBG) program. Indian Tribes, tribally designated housing entities (TDHEs), and other tribal entities funding housing counseling required under or provided in connection with IHBG or ICDBG programs shall not be subject to the requirements of this part, except as otherwise provided in this subpart. (b) Housing counseling required under or provided in connection with IHBG or ICDBG programs must be provided by a HUD-certified housing counselor or a HUD-certified Tribal housing counselor. (c) HUD will certify an individual housing counselor to provide housing counseling required under or provided in connection with IHBG or ICDBG programs upon verification that the person: (1) Passes a standardized written examination to demonstrate competency in each of the following areas: (i) Financial management; (ii) Property maintenance; (iii) Responsibilities of homeownership and tenancy; (iv) Fair housing laws and requirements; (v) Housing affordability; and (vi) Avoidance of, and response to, rental or mortgage delinquency and avoidance of eviction or mortgage default; and (2) Works for an Indian Tribe, TDHE, or other Tribal entity. (d) To provide housing counseling required under or provided in connection with HUD programs other than the IHBG and ICDBG programs, an individual working for an Indian Tribe, TDHE, or other Tribal entity must meet the housing counseling certification requirement under § 214.103(n), including the standardized written examination required under § 214.103(n)(2), and the Indian Tribe, TDHE, or other Tribal entity must be a participating agency). (e) Entities and individuals providing housing counseling under this subpart must be certified by the Office of Housing Counseling by 48 months from the effective date of this rule or 30 days after HUD makes the Tribal certification examination available, whichever is later. HUD will publish a document in the Federal Register to announce the start of the testing and certification requirement." 24:24:2.1.1.2.10.6.155.2,24,Housing and Urban Development,II,B,214,PART 214—HOUSING COUNSELING PROGRAM,F,Subpart F—Certification of Tribal Housing Counselors,,§ 214.601 [Reserved],HUD,,,, 49:49:4.1.1.1.9.1.5.1,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,A,Subpart A—General,,§ 214.1 Purpose and scope.,FRA,,,,"(a) The purpose of this part is to prevent accidents and casualties to employees involved in certain railroad inspection, maintenance and construction activities. (b) This part prescribes minimum Federal safety standards for the railroad workplace safety subjects addressed herein. This part does not restrict a railroad or railroad contractor from adopting and enforcing additional or more stringent requirements not inconsistent with this part." 49:49:4.1.1.1.9.1.5.2,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,A,Subpart A—General,,§ 214.3 Application.,FRA,,,,This part applies to railroads that operate rolling equipment on track that is part of the general railroad system of transportation. 49:49:4.1.1.1.9.1.5.3,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,A,Subpart A—General,,§ 214.5 Responsibility for compliance.,FRA,,,"[90 FR 28138, July 1, 2025]","(a) Any person who violates any requirement of this part or causes the violation of any such requirement is subject to a civil penalty of at least the minimum civil monetary penalty and not more than the ordinary maximum civil monetary penalty per violation. However, penalties may be assessed against individuals only for willful violations, and a penalty not to exceed the aggravated maximum civil monetary penalty per violation may be assessed, where: (1) A grossly negligent violation, or a pattern of repeated violations, has created an imminent hazard of death or injury to persons, or (2) A death or injury has occurred. See 49 CFR part 209, appendix A. (b) “Person” means an entity of any type covered under 49 U.S.C. 21301, including the following: a railroad; a manager, supervisor, official, or other employee or agent of a railroad; any owner, manufacturer, lessor, or lessee of railroad equipment, track, or facilities; any independent contractor providing goods or services to a railroad; and any employee of such owner, manufacturer, lessor, lessee, or independent contractor. (c) See FRA's website at https://railroads.dot.gov/ for a statement of agency civil penalty policy." 49:49:4.1.1.1.9.1.5.4,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,A,Subpart A—General,,§ 214.7 Definitions.,FRA,,,"[57 FR 28127, June 24, 1992, as amended at 61 FR 65975, Dec. 16, 1996; 67 FR 1906, Jan. 15, 2002; 68 FR 44407, July 28, 2003; 76 FR 74614, Nov. 30, 2011; 79 FR 66500, Nov. 7, 2014; 81 FR 37884, June 10, 2016]","Unless otherwise provided, as used in this part— Adjacent tracks mean two or more tracks with track centers spaced less than 25 feet apart. Anchorage means a secure point of attachment for lifelines, lanyards or deceleration devices that is independent of the means of supporting or suspending the employee. Body belt means a strap that can be secured around the waist or body and attached to a lanyard, lifeline, or deceleration device. Body harness means a device with straps that is secured about the person in a manner so as to distribute the fall arrest forces over (at least) the thighs, shoulders, pelvis, waist, and chest and that can be attached to a lanyard, lifeline, or deceleration device. Class I, Class II, and Class III have the meaning assigned by, Title 49 Code of Federal Regulations part 1201, General Instructions 1-1. Competent person means one who is capable of identifying existing and predictable hazards in the workplace and who is authorized to take prompt corrective measures to eliminate them. Control operator means the railroad employee in charge of a remotely controlled switch or derail, an interlocking, or a controlled point, or a segment of controlled track. Controlled point means a location where signals and/or other functions of a traffic control system are controlled from the control machine. Controlled track means track upon which the railroad's operating rules require that all movements of trains must be authorized by a train dispatcher or a control operator. Deceleration device means any mechanism, including, but not limited to, rope grabs, ripstitch lanyards, specially woven lanyards, tearing or deforming lanyards, and automatic self-retracting lifelines/lanyards that serve to dissipate a substantial amount of energy during a fall arrest, or otherwise limit the energy on a person during fall arrest. Definite train location means a system for establishing on-track safety by providing roadway workers with information about the earliest possible time that approaching trains may pass specific locations as prescribed in § 214.331 of this part. Designated official means any person(s) designated by the employer to receive notification of non-complying conditions on on-track roadway maintenance machines and hi-rail vehicles. Effective securing device means a vandal and tamper resistant lock, keyed for application and removal only by the roadway worker(s) for whom the protection is provided. In the absence of a lock, it is acceptable to use a spike driven firmly into a switch tie or a switch point clamp to prevent the use of a manually operated switch. It is also acceptable to use portable derails secured with specifically designed metal wedges. Securing devices without a specially keyed lock shall be designed in such a manner that they require railroad track tools for installation and removal and the operating rules of the railroad must prohibit removal by employees other than the class, craft, or group of employees for whom the protection is being provided. Regardless of the type of securing device, the throwing handle or hasp of the switch or derail shall be uniquely tagged. If there is no throwing handle, the securing device shall be tagged. Employee means an individual who is engaged or compensated by a railroad or by a contractor to a railroad to perform any of the duties defined in this part. Employer means a railroad, or a contractor to a railroad, that directly engages or compensates individuals to perform any of the duties defined in this part. Equivalent means alternative designs, materials, or methods that the railroad or railroad contractor can demonstrate will provide equal or greater safety for employees than the means specified in this part. Exclusive track occupancy means a method of establishing working limits on controlled track in which movement authority of trains and other equipment is withheld by the train dispatcher or control operator, or restricted by flagmen, as prescribed in § 214.321 of this part. Flagman when used in relation to roadway worker safety means an employee designated by the railroad to direct or restrict the movement of trains past a point on a track to provide on-track safety for roadway workers, while engaged solely in performing that function. Foul time is a method of establishing working limits on controlled track in which a roadway worker is notified by the train dispatcher or control operator that no trains will operate within a specific segment of controlled track until the roadway worker reports clear of the track, as prescribed in § 214.323 of this part. Fouling a track means the placement of an individual or an item of equipment in such proximity to a track that the individual or equipment could be struck by a moving train or on-track equipment, or in any case is within four feet of the field side of the near running rail. Free fall means the act of falling before the personal fall arrest system begins to apply force to arrest the fall. Free fall distance means the vertical displacement of the fall arrest attachment point on a person's body harness between onset of the fall and the point at which the system begins to apply force to arrest the fall. This distance excludes deceleration distance and lifeline and lanyard elongation, but includes any deceleration device slide distance or self-retracting lifeline/lanyard extension before they operate and fall arrest forces occur. Hi-rail vehicle means a roadway maintenance machine that is manufactured to meet Federal Motor Vehicle Safety Standards and is equipped with retractable flanged wheels so that the vehicle may travel over the highway or on railroad tracks. Hi-rail vehicle, new means a hi-rail vehicle that is ordered after December 26, 2003 or completed after September 27, 2004. Inaccessible track means a method of establishing working limits on non-controlled track by physically preventing entry and movement of trains and equipment. Individual train detection means a procedure by which a lone worker acquires on-track safety by seeing approaching trains and leaving the track before they arrive and which may be used only under circumstances strictly defined in this part. Informational line-up of trains means information provided in a prescribed format to a roadway worker by the train dispatcher regarding movements of trains authorized or expected on a specific segment of track during a specific period of time. Interlocking, manual means an arrangement of signals and signal appliances operated from an interlocking machine and so interconnected by means of mechanical and/or electric locking that their movements must succeed each other in proper sequence, train movements over all routes being governed by signal indication. Lanyard means a flexible line of rope, wire rope, or strap that is used to secure a body harness to a deceleration device, lifeline, or anchorage. Lifeline means a component of a fall arrest system consisting of a flexible line that connects to an anchorage at one end to hang vertically (vertical lifeline) or to an anchorage at both ends to stretch horizontally (horizontal lifeline), and that serves as a means for connecting other components of a personal fall arrest system to the anchorage. Lone worker means an individual roadway worker who is not being afforded on-track safety by another roadway worker, who is not a member of a roadway work group, and who is not engaged in a common task with another roadway worker. Maximum authorized speed means the highest speed permitted for the movement of trains permanently established by timetable/special instructions, general order, or track bulletin. Non-controlled track means track upon which trains are permitted by railroad rule or special instruction to move without receiving authorization from a train dispatcher or control operator. On-track roadway maintenance machine means a self-propelled, rail-mounted, non-highway, maintenance machine whose light weight is in excess of 7,500 pounds, and whose purpose is not for the inspection of railroad track. On-track roadway maintenance machine, existing means any on-track roadway maintenance machine that does not meet the definition of a “new on-track roadway maintenance machine.” On-track roadway maintenance machine, new means an on-track roadway maintenance machine that is ordered after December 26, 2003, and completed after September 27, 2004. On-track safety means a state of freedom from the danger of being struck by a moving railroad train or other railroad equipment, provided by operating and safety rules that govern track occupancy by personnel, trains and on-track equipment. On-track safety manual means the entire set of on-track safety rules and instructions maintained together in one manual designed to prevent roadway workers from being struck by trains or other on-track equipment. These instructions include operating rules and other procedures concerning on-track safety protection and on-track safety measures. Personal fall arrest system means a system used to arrest the fall of a person from a working level. It consists of an anchorage, connectors, body harness, lanyard, deceleration device, lifeline, or combination of these. Qualified means a status attained by an employee who has successfully completed any required training for, has demonstrated proficiency in, and has been authorized by the employer to perform the duties of a particular position or function. Railroad means all forms of non-highway ground transportation that run on rails or electro-magnetic guideways, including (1) commuter or other short-haul rail passenger service in a metropolitan or suburban area, and (2) high-speed ground transportation systems that connect metropolitan areas, without regard to whether they use new technologies not associated with traditional railroads. Such term does not include rapid transit operations within an urban area that are not connected to the general railroad system of transportation. Railroad bridge means a structure supporting one or more railroad tracks above land or water with a span length of 12 feet or more measured along the track centerline. This term applies to the entire structure between the faces of the backwalls of abutments or equivalent components, regardless of the number of spans, and includes all such structures, whether of timber, stone, concrete, metal, or any combination thereof. Railroad bridge worker or bridge worker means any employee of, or employee of a contractor of, a railroad owning or responsible for the construction, inspection, testing, or maintenance of a bridge whose assigned duties, if performed on the bridge, include inspection, testing, maintenance, repair, construction, or reconstruction of the track, bridge structural members, operating mechanisms and water traffic control systems, or signal, communication, or train control systems integral to that bridge. Restricted speed means a speed that will permit a train or other equipment to stop within one-half the range of vision of the person operating the train or other equipment, but not exceeding 20 miles per hour, unless further restricted by the operating rules of the railroad. Roadway maintenance machine means a device powered by any means of energy other than hand power which is being used on or near railroad track for maintenance, repair, construction or inspection of track, bridges, roadway, signal, communications, or electric traction systems. Roadway maintenance machines may have road or rail wheels or may be stationary. Roadway maintenance machines equipped with a crane means any roadway maintenance machine equipped with a crane or boom that can hoist, lower, and horizontally move a suspended load. Roadway work group means two or more roadway workers organized to work together on a common task. Roadway worker means any employee of a railroad, or of a contractor to a railroad, whose duties include inspection, construction, maintenance or repair of railroad track, bridges, roadway, signal and communication systems, electric traction systems, roadway facilities or roadway maintenance machinery on or near track or with the potential of fouling a track, and flagmen and watchmen/lookouts as defined in this section. Roadway worker in charge means a roadway worker who is qualified under § 214.353 to establish on-track safety for roadway work groups, and lone workers qualified under § 214.347 to establish on-track safety for themselves. Self-retracting lifeline/lanyard means a deceleration device that contains a drum-wound line that may be slowly extracted from, or retracted onto, the drum under slight tension during normal employee movement, and which, after onset of a fall, automatically locks the drum and arrests the fall. Snap-hook means a connector comprised of a hook-shaped member with a normally closed keeper, that may be opened to permit the hook to receive an object and, when released, automatically closes to retain the object. Train approach warning means a method of establishing on-track safety by warning roadway workers of the approach of trains in ample time for them to move to or remain in a place of safety in accordance with the requirements of this part. Train coordination means a method of establishing working limits on track upon which a train holds exclusive authority to move whereby the crew of that train yields that authority to a roadway worker. Train dispatcher means the railroad employee assigned to control and issue orders governing the movement of trains on a specific segment of railroad track in accordance with the operating rules of the railroad that apply to that segment of track. Watchman/lookout means an employee who has been trained and qualified to provide warning to roadway workers of approaching trains or on-track equipment. Watchmen/lookouts shall be properly equipped to provide visual and auditory warning such as whistle, air horn, white disk, red flag, lantern, fuse. A watchman/lookout's sole duty is to look out for approaching trains/on-track equipment and provide at least fifteen seconds advanced warning to employees before arrival of trains/on-track equipment. Working limits means a segment of track with definite boundaries established in accordance with this part upon which trains and engines may move only as authorized by the roadway worker having control over that defined segment of track. Working limits may be established through “exclusive track occupancy,” “inaccessible track,” “foul time” or “train coordination” as defined herein." 49:49:4.1.1.1.9.2.5.1,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.101 Purpose and scope.,FRA,,,,"(a) The purpose of this subpart is to prevent accidents and casualties arising from the performance of work on railroad bridges. (b) This subpart prescribes minimum railroad safety rules for railroad employees performing work on bridges. Each railroad and railroad contractor may prescribe additional or more stringent operating rules, safety rules, and other special instructions not inconsistent with this subpart. (c) These provisions apply to all railroad employees, railroads, and railroad contractors performing work on railroad bridges. (d) Any working conditions involving the protection of railroad employees working on railroad bridges not within the subject matter addressed by this chapter, including respiratory protection, hazard communication, hearing protection, welding and lead exposure standards, shall be governed by the regulations of the U.S. Department of Labor, Occupational Safety and Health Administration." 49:49:4.1.1.1.9.2.5.2,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,"§ 214.103 Fall protection, generally.",FRA,,,"[67 FR 1906, Jan. 15, 2002]","(a) Except as provided in paragraphs (b) through (d) of this section, when bridge workers work twelve feet or more above the ground or water surface, they shall be provided and shall use a personal fall arrest system or safety net system. All fall protection systems required by this section shall conform to the standards set forth in § 214.105 of this subpart. (b)(1) This section shall not apply if the installation of the fall arrest system poses a greater risk than the work to be performed. In any action brought by FRA to enforce the fall protection requirements, the railroad or railroad contractor shall have the burden of proving that the installation of such device poses greater exposure to risk than performance of the work itself. (2) This section shall not apply to bridge workers engaged in inspection of railroad bridges conducted in full compliance with the following conditions: (i) The railroad or railroad contractor has a written program in place that requires training in, adherence to, and use of safe procedures associated with climbing techniques and procedures to be used; (ii) The bridge worker to whom this exception applies has been trained and qualified according to that program to perform bridge inspections, has been previously and voluntarily designated to perform inspections under the provision of that program, and has accepted the designation; (iii) The bridge worker to whom this exception applies is familiar with the appropriate climbing techniques associated with all bridge structures the bridge worker is responsible for inspecting; (iv) The bridge worker to whom this exception applies is engaged solely in moving on or about the bridge or observing, measuring and recording the dimensions and condition of the bridge and its components; and (v) The bridge worker to whom this section applies is provided all equipment necessary to meet the needs of safety, including any specialized alternative systems required. (c) This section shall not apply where bridge workers are working on a railroad bridge equipped with walkways and railings of sufficient height, width, and strength to prevent a fall, so long as bridge workers do not work beyond the railings, over the side of the bridge, on ladders or other elevation devices, or where gaps or holes exist through which a body could fall. Where used in place of fall protection as provided for in § 214.105, this paragraph (c) is satisfied by: (1) Walkways and railings meeting standards set forth in the American Railway Engineering Association's Manual for Railway Engineering; and (2) Roadways attached to railroad bridges, provided that bridge workers on the roadway deck work or move at a distance six feet or more from the edge of the roadway deck, or from an opening through which a person could fall. (d) This section shall not apply where bridge workers are performing repairs or inspections of a minor nature that are completed by working exclusively between the outside rails, including but not limited to, routine welding, spiking, anchoring, spot surfacing, and joint bolt replacement." 49:49:4.1.1.1.9.2.5.3,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.105 Fall protection systems standards and practices.,FRA,,,"[67 FR 1906, Jan. 15, 2002; 67 FR 11055, Mar. 12, 2002]","(a) General requirements. All fall protection systems required by this subpart shall conform to the following: (1) Fall protection systems shall be used only for personal fall protection. (2) Any fall protection system subjected to impact loading shall be immediately and permanently removed from service unless fully inspected and determined by a competent person to be undamaged and suitable for reuse. (3) All fall protection system components shall be protected from abrasions, corrosion, or any other form of deterioration. (4) All fall protection system components shall be inspected prior to each use for wear, damage, corrosion, mildew, and other deterioration. Defective components shall be permanently removed from service. (5) Prior to use and after any component or system is changed, bridge workers shall be trained in the application limits of the equipment, proper hook-up, anchoring and tie-off techniques, methods of use, and proper methods of equipment inspection and storage. (6) The railroad or railroad contractor shall provide for prompt rescue of bridge workers in the event of a fall. (7) Connectors shall have a corrosion-resistant finish, and all surfaces and edges shall be smooth to prevent damage to interfacing parts of the system. (8) Connectors shall be drop forged, pressed or formed steel, or made of equivalent-strength materials. (9) Anchorages, including single- and double-head anchors, shall be capable of supporting at least 5,000 pounds per bridge worker attached, or shall be designed, installed, and used under supervision of a qualified person as part of a complete personal fall protection system that maintains a safety factor of at least two. (b) Personal fall arrest systems. All components of a personal fall arrest system shall conform to the following standards: (1) Lanyards and vertical lifelines that tie off one bridge worker shall have a minimum breaking strength of 5,000 pounds. (2) Self-retracting lifelines and lanyards that automatically limit free fall distance to two feet or less shall have components capable of sustaining a minimum static tensile load of 3,000 pounds applied to the device with the lifeline or lanyard in the fully extended position. (3) Self-retracting lifelines and lanyards that do not limit free fall distance to two feet or less, ripstitch, and tearing and deformed lanyards shall be capable of withstanding 5,000 pounds applied to the device with the lifeline or lanyard in the fully extended position. (4) Horizontal lifelines shall be designed, installed, and used under the supervision of a competent person, as part of a complete personal fall arrest system that maintains a safety factor of at least two. (5) Lifelines shall not be made of natural fiber rope. (6) Body belts shall not be used as components of personal fall arrest systems. (7) The personal fall arrest system shall limit the maximum arresting force on a bridge worker to 1,800 pounds when used with a body harness. (8) The personal fall arrest system shall bring a bridge worker to a complete stop and limit maximum deceleration distance a bridge worker travels to 3.5 feet. (9) The personal fall arrest system shall have sufficient strength to withstand twice the potential impact energy of a bridge worker free falling a distance of six feet, or the free fall distance permitted by the system, whichever is less. (10) The personal fall arrest system shall be arranged so that a bridge worker cannot free fall more than six feet and cannot contact the ground or any lower horizontal surface of the bridge. (11) Personal fall arrest systems shall be worn with the attachment point of the body harness located in the center of the wearer's back near shoulder level, or above the wearer's head. (12) When vertical lifelines are used, each bridge worker shall be provided with a separate lifeline. (13) Devices used to connect to a horizontal lifeline that may become a vertical lifeline shall be capable of locking in either direction. (14) Dee-rings and snap-hooks shall be capable of sustaining a minimum tensile load of 3,600 pounds without cracking, breaking, or taking permanent deformation. (15) Dee-rings and snap-hooks shall be capable of sustaining a minimum tensile load of 5,000 pounds. (16) Snap-hooks shall not be connected to each other. (17) Snap-hooks shall be dimensionally compatible with the member to which they are connected to prevent unintentional disengagement, or shall be a locking snap-hook designed to prevent unintentional disengagement. (18) Unless of a locking type, snap-hooks shall not be engaged: (i) Directly, next to a webbing, rope, or wire rope; (ii) To each other; (iii) To a dee-ring to which another snap-hook or other connector is attached; (iv) To a horizontal lifeline; or (v) To any object that is incompatibly shaped or dimensioned in relation to the snap-hook so that unintentional disengagement could occur. (c) Safety net systems. Use of safety net systems shall conform to the following standards and practices: (1) Safety nets shall be installed as close as practicable under the walking/working surface on which bridge workers are working, but shall not be installed more than 30 feet below such surface. (2) If the distance from the working surface to the net exceeds 30 feet, bridge workers shall be protected by personal fall arrest systems. (3) The safety net shall be installed such that any fall from the working surface to the net is unobstructed. (4) Except as provided in this section, safety nets and net installations shall be drop-tested at the jobsite after initial installation and before being used as a fall protection system, whenever relocated, after major repair, and at six-month intervals if left in one place. The drop-test shall consist of a 400-pound bag of sand 30 inches, plus or minus two inches, in diameter dropped into the net from the highest (but not less than 3 1/2 feet) working surface on which bridge workers are to be protected. (i) When the railroad or railroad contractor demonstrates that a drop-test is not feasible and, as a result, the test is not performed, the railroad or railroad contractor, or designated competent person, shall certify that the net and its installation are in compliance with the provisions of this section by preparing a certification record prior to use of the net. (ii) The certification shall include an identification of the net, the date it was determined that the net was in compliance with this section, and the signature of the person making this determination. Such person's signature shall certify that the net and its installation are in compliance with this section. The most recent certification for each net installation shall be available at the jobsite where the subject net is located. (5) Safety nets and their installations shall be capable of absorbing an impact force equal to that produced by the drop test specified in this section. (6) The safety net shall be installed such that there is no contact with surfaces or structures below the net when subjected to an impact force equal to the drop test specified in this section. (7) Safety nets shall extend outward from the outermost projection of the work surface as follows: (i) When the vertical distance from the working level to the horizontal plane of the net is 5 feet or less, the minimum required horizontal distance of the outer edge of the net beyond the edge of the working surface is 8 feet. (ii) When the vertical distance from the working level to the horizontal plane of the net is 5 feet, but less than 10 feet, the minimum required horizontal distance of the outer edge of the net beyond the edge of the working surface is 10 feet. (iii) When the vertical distance from the working level to the horizontal plane of the net is more than 10 feet, the minimum required horizontal distance of the outer edge of the net beyond the edge of the working surface is 13 feet. (8) Defective nets shall not be used. Safety nets shall be inspected at least once a week for mildew, wear, damage, and other deterioration. Defective components shall be removed permanently from service. (9) Safety nets shall be inspected after any occurrence that could affect the integrity of the safety net system. (10) Tools, scraps, or other materials that have fallen into the safety net shall be removed as soon as possible, and at least before the next work shift. (11) Each safety net shall have a border rope for webbing with a minimum breaking strength of 5,000 pounds. (12) The maximum size of each safety net mesh opening shall not exceed 36 square inches and shall not be longer than 6 inches on any side measured center-to-center of mesh ropes or webbing. All mesh crossing shall be secured to prevent enlargement of the mesh opening. (13) Connections between safety net panels shall be as strong as integral net components and shall be spaced not more than 6 inches apart." 49:49:4.1.1.1.9.2.5.4,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.107 Working over or adjacent to water.,FRA,,,"[70 FR 7050, Feb. 10, 2005]","(a) Bridge workers working over or adjacent to water with a depth of four feet or more, or where the danger of drowning exists, shall be provided and shall use life vests or buoyant work vests in compliance with U.S. Coast Guard requirements in 46 CFR 160.047, 160.052, and 160.053. Life preservers in compliance with U.S. Coast Guard requirements in 46 CFR 160.055 shall also be within ready access. This section shall not apply to bridge workers using personal fall arrest systems or safety nets that comply with this subpart or to bridge workers who are working under the provisions of § 214.103(b)(2), (c) or (d) of this subpart. (b) Prior to each use, all flotation devices shall be inspected for defects that reduce their strength or buoyancy by designated individuals trained by the railroad or railroad contractor. Defective units shall not be used. (c) Where life vests are required by paragraph (a) of this section, ring buoys with at least 90 feet of line shall be provided and readily available for emergency rescue operations. Distance between ring buoys shall not exceed 200 feet. (d) Where life vests are required, at least one lifesaving skiff, inflatable boat, or equivalent device shall be immediately available. If it is determined by a competent person that environmental conditions, including weather, water speed, and terrain, merit additional protection, the skiff or boat shall be manned." 49:49:4.1.1.1.9.2.5.5,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.109 Scaffolding.,FRA,,,,"(a) Scaffolding used in connection with railroad bridge maintenance, inspection, testing, and construction shall be constructed and maintained in a safe condition and meet the following minimum requirements: (1) Each scaffold and scaffold component, except suspension ropes and guardrail systems, but including footings and anchorage, shall be capable of supporting, without failure, its own weight and at least four times the maximum intended load applied or transmitted to that scaffold or scaffold component. (2) Guardrail systems shall be capable of withstanding, without failure, a force of at least 200 pounds applied within two inches of the top edge, in any outward or downward direction, at any point along the top edge. (3) Top edge height of toprails, or equivalent guardrail system member, shall be 42 inches, plus or minus three inches. Supports shall be at intervals not to exceed eight feet. Toeboards shall be a minimum of four inches in height. (4) Midrails, screens, mesh, intermediate vertical members, solid panels, and equivalent structural members shall be capable of withstanding, without failure, a force of at least 150 pounds applied in any downward or outward direction at any point along the midrail or other member. (5) Midrails shall be installed at a height midway between the top edge of the guardrail system and the walking/working level. (b) Scaffolds shall not be altered or moved while they are occupied. This paragraph does not apply to vertical movements of mobile scaffolds that are designed to move vertically while occupied. (c) An access ladder or equivalent safe access shall be provided. (d) All exposed surfaces shall be prepared and cleared to prevent injury due to laceration, puncture, tripping, or falling hazard. (e) All scaffold design, construction, and repair shall be completed by competent individuals trained and knowledgeable about design criteria, intended use, structural limitations, and procedures for proper repair. (f) Manually propelled mobile ladder stands and scaffolds shall conform to the following: (1) All manually propelled mobile ladder stands and scaffolds shall be capable of carrying the design load. (2) All ladder stands, scaffolds, and scaffold components shall be capable of supporting, without failure, displacement, or settlement, its own weight and at least four times the maximum intended load applied or transmitted to that ladder stand, scaffold, or scaffold component. (3) All exposed surfaces shall be free from sharp edges or burrs. (4) The maximum work level height shall not exceed four times the minimum or least base dimensions of any mobile ladder stand or scaffold. Where the basic mobile unit does not meet this requirement, suitable outrigger frames shall be employed to achieve this least base dimension, or equivalent provisions shall be made to guy or brace the unit against tipping. (5) The minimum platform width for any work level shall not be less than 20 inches for mobile scaffolds (towers). Ladder stands shall have a minimum step width of 16 inches. The steps of ladder stands shall be fabricated from slip resistant treads. (6) Guardrails and midrails shall conform to the requirements listed in paragraph (a) of this section. (7) A climbing ladder or stairway shall be provided for proper access and egress, and shall be affixed or built into the scaffold and so located that in its use it will not have a tendency to tip the scaffold. (8) Wheels or casters shall be capable of supporting, without failure, at least four times the maximum intended load applied or transmitted to that component. All scaffold casters shall be provided with a positive wheel and/or swivel lock to prevent movement. Ladder stands shall have at least two of the four casters and shall be of the swivel type." 49:49:4.1.1.1.9.2.5.6,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,"§ 214.111 Personal protective equipment, generally.",FRA,,,"[67 FR 1908, Jan. 15, 2002]","With the exception of foot protection, the railroad or railroad contractor shall provide and the bridge worker shall use appropriate personal protective equipment described in this subpart in all operations where there is exposure to hazardous conditions, or where this subpart indicates the need for using such equipment to reduce the hazards to railroad bridge workers. The railroad or railroad contractor shall require the use of foot protection when the potential for foot injury exists." 49:49:4.1.1.1.9.2.5.7,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.113 Head protection.,FRA,,,"[67 FR 1908, Jan. 15, 2002, as amended at 74 FR 25172, May 27, 2009; 81 FR 37884, June 10, 2016]","(a) Railroad bridge workers working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be provided and shall wear protective helmets. (b) Helmets required by this section shall conform to the requirements of 29 CFR 1910.135(b), as established by the U.S. Department of Labor, Occupational Safety and Health Administration." 49:49:4.1.1.1.9.2.5.8,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.115 Foot protection.,FRA,,,"[67 FR 1908, Jan. 15, 2002, as amended at 74 FR 25172, May 27, 2009; 81 FR 37885, June 10, 2016]","(a) The railroad or railroad contractor shall require railroad bridge workers to wear foot protection equipment when potential foot injury may result from impact, falling or flying objects, electrical shock or burns, or other hazardous condition. (b) Foot protection equipment required by this section shall conform to the requirements of 29 CFR 1910.136(b), as established by the U.S. Department of Labor, Occupational Safety and Health Administration." 49:49:4.1.1.1.9.2.5.9,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,B,Subpart B—Bridge Worker Safety Standards,,§ 214.117 Eye and face protection.,FRA,,,"[67 FR 1908, Jan. 15, 2002; 67 FR 11055, Mar. 12, 2002, as amended at 74 FR 25172, May 27, 2009; 81 FR 37885, June 10, 2016]","(a) Railroad bridge workers shall be provided and shall wear eye and face protection equipment when potential eye or face injury may result from physical, chemical, or radiant agents. (b) Eye and face protection equipment required by this section shall conform to the requirements of 29 CFR 1910.133(b), as established by the U.S. Department of Labor, Occupational Safety and Health Administration. (c) Face and eye protection equipment required by this section shall be kept clean and in good repair. Use of equipment with structural or optical defects is prohibited. (d) Railroad bridge workers whose vision requires the use of corrective lenses, when required by this section to wear eye protection, shall be protected by goggles or spectacles of one of the following types: (i) Spectacles whose protective lenses provide optical correction the, frame of which includes shielding against objects reaching the wearer's eyes around the lenses; (ii) Goggles that can be worn over corrective lenses without disturbing the adjustment of the lenses; or (iii) Goggles that incorporate corrective lenses mounted behind the protective lenses." 49:49:4.1.1.1.9.3.5.1,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.301 Purpose and scope.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37885, June 10, 2016]","(a) The purpose of this subpart is to prevent accidents and casualties caused by moving railroad cars, locomotives or roadway maintenance machines striking roadway workers or roadway maintenance machines. (b) This subpart prescribes minimum safety standards for roadway workers. Each railroad and railroad contractor may prescribe additional or more stringent operating rules, safety rules, and other special instructions that are consistent with this subpart. (c) This subpart prescribes safety standards related to the movement of roadway maintenance machines where such movements affect the safety of roadway workers. Except as provided for in § 214.320, this subpart does not otherwise affect movements of roadway maintenance machines that are conducted under the authority of a train dispatcher, a control operator, or the operating rules of the railroad." 49:49:4.1.1.1.9.3.5.10,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.317 On-track safety procedures, generally.",FRA,,,"[81 FR 37885, June 10, 2016]","(a) Each employer subject to the provisions of this part shall provide on-track safety for roadway workers by adopting a program that contains specific rules for protecting roadway workers that comply with the provisions of §§ 214.319 through 214.337. (b) Roadway workers may walk across any track provided that they can safely be across and clear of the track before a train or other on-track equipment would arrive at the crossing point under the following circumstances: (1) Employers shall adopt, and roadway workers shall comply with, applicable railroad safety rules governing how to determine that it is safe to cross the track before starting across; (2) Roadway workers shall move directly and promptly across the track; and (3) On-track safety protection is in place for all roadway workers who are actually engaged in work, including inspection, construction, maintenance or repair, and extending to carrying tools or material that restricts motion, impairs sight or hearing, or prevents an employee from detecting and moving rapidly away from an approaching train or other on-track equipment. (c) On non-controlled track, on-track roadway maintenance machines engaged in weed spraying or snow removal may proceed under the provisions of § 214.301(c), under the following conditions: (1) Each railroad shall establish and comply with an operating procedure for on-track snow removal and weed spray equipment to ensure that: (i) All on-track movements in the affected area are informed of such operations; (ii) All on-track movements shall operate at restricted speed as defined in § 214.7, except on other than yard tracks and yard switching leads, where all on-track movements shall operate prepared to stop within one-half the range of vision but not exceeding 25 mph; (iii) A means for communication between the on-track equipment and other on-track movements is provided; and (iv) Remotely controlled hump yard facility operations are not in effect, and kicking of cars is prohibited unless agreed to by the roadway worker in charge. (2) Roadway workers engaged in such snow removal or weed spraying operations subject to this section shall retain an absolute right to use the provisions of § 214.327 (inaccessible track). (3) Roadway workers assigned to work with this equipment may line switches (or derails operated via a switch stand) for the machine's movement but shall not engage in any roadway work activity unless protected by another form of on-track safety. (4) Each roadway maintenance machine engaged in snow removal or weed spraying under this provision shall be equipped with and utilize: (i) An operative 360-degree intermittent warning light or beacon; (ii) Work lights, if the machine is operated during the period between one-half hour after sunset and one-half hour before sunrise or in dark areas such as tunnels, unless equivalent lighting is otherwise provided; (iii) An illumination device, such as a headlight, capable of illuminating obstructions on the track ahead in the direction of travel for a distance of 300 feet under normal weather and atmospheric conditions; (iv) A brake light activated by the application of the machine braking system, and designed to be visible for a distance of 300 feet under normal weather and atmospheric conditions; and (v) A rearward viewing device, such as a rearview mirror. (d) Tunnel niches or clearing bays in existence prior to April 1, 2017 that are designed to permit roadway workers to occupy a place of safety when trains or other on-track equipment pass the niche or clearing bay, but are less than four feet from the field side of the nearest rail, may continue to be used as a place of safety provided: (1) Such niches or clearing bays are visually inspected by the roadway worker in charge or lone worker prior to making the determination that the niche or clearing bay is suitable for use as a place of safety; (2) There is adequate sight distance to permit a roadway worker or lone worker to occupy the place of safety in the niche or clearing bay at least 15 seconds prior to the arrival of a train or other on-track equipment at the work location in accordance with §§ 214.329 and 214.337; and (3) The roadway worker in charge or lone worker shall have the absolute right to designate a place of safety as a location other than that of a tunnel niche or clearing bay described by this paragraph (d), or to establish working limits." 49:49:4.1.1.1.9.3.5.11,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.318 Locomotive servicing and car shop repair track areas.,FRA,,,"[81 FR 31886, June 10, 2016]","(a) In lieu of the requirements of this subpart, workers (as defined by § 218.5 of this chapter) within the limits of locomotive servicing and car shop repair track areas (as both are defined by § 218.5 of this chapter) may utilize procedures established by a railroad in accordance with part 218, subpart B, of this chapter (Blue Signal Protection) to perform duties incidental to inspecting, testing, servicing, or repairing rolling equipment when those incidental duties involve fouling a track that is protected by Blue Signal Protection. A railroad utilizing Blue Signal Protection in lieu of the requirements of this subpart must have rules in effect governing the applicability of those protections to the incidental duties being performed. (b) Paragraph (a) of this section applies to employees of a contractor to a railroad if such incidental duties are performed under the supervision of a railroad employee qualified (as defined by § 217.4 of this chapter) on the railroad's rules and procedures implementing the Blue Signal Protection requirements. (c) Any work performed within the limits of a locomotive servicing or car shop repair track area with the potential of fouling a track which requires a person qualified under § 213.7 of this chapter to be present to inspect or supervise such work must be performed in accordance with the requirements of this subpart." 49:49:4.1.1.1.9.3.5.12,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.319 Working limits, generally.",FRA,,,"[81 FR 37886, June 10, 2016]","Working limits established on controlled track shall conform to the provisions of § 214.321 Exclusive track occupancy, § 214.323 Foul time, or § 214.325 Train coordination. Working limits established on non-controlled track shall conform to the provision of § 214.327 Inaccessible track. (a) Working limits established under any procedure shall, in addition, conform to the following provisions: (1) Only a roadway worker in charge who is qualified in accordance with § 214.353 shall establish or have control over working limits for the purpose of establishing on-track safety. (2) Only one roadway worker in charge who is qualified in accordance with § 214.353 shall have control over working limits on any one segment of track. (3) All affected roadway workers shall be notified before working limits are released for the operation of trains. Working limits shall not be released until all affected roadway workers have either left the track or have been afforded on-track safety through train approach warning in accordance with § 214.329. (b) Each Class I or Class II railroad or each railroad providing regularly scheduled intercity or commuter rail passenger transportation that utilizes controlled track working limits as a form of on-track safety (under §§ 214.321 through 214.323) in signalized territory shall: (1) By July 1, 2017, evaluate its on-track safety program and identify an appropriate method(s) of providing redundant signal protections for roadway work groups who depend on a train dispatcher or control operator to provide signal protection in establishing controlled track working limits. For purposes of this section, redundant signal protections means risk mitigation measures or safety redundancies adopted to ensure the proper establishment and maintenance of signal protections for controlled track working limits until such working limits are released by the roadway worker in charge. Appropriate redundant protections could include the use of various risk mitigation measures (or a combination of risk mitigation measures) such as technology, training, supervision, or operating-based procedures; or could include use of redundant signal protection, such as shunting, designed to prevent signal system-related incursions into established controlled track working limits; and (2) By January 1, 2018, specifically identify, implement, and comply with the method(s) of providing redundant protections in its on-track safety program. (c) Upon a railroad's request, FRA will consider an exemption from the requirements of paragraph (b) of this section for each segment of track(s) for which operations are governed by a positive train control system under part 236, subpart I, of this chapter. A request for approval to exempt a segment of track must be submitted in writing to the FRA Associate Administrator for Railroad Safety and Chief Safety Officer. The FRA Associate Administrator for Railroad Safety and Chief Safety Officer will review a railroad's submission and will notify a railroad of its approval or disapproval in writing within 90 days of FRA's receipt of a railroad's written request, and shall specify the basis for any disapproval decision." 49:49:4.1.1.1.9.3.5.13,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.320 Roadway maintenance machine movements over signalized non-controlled track.,FRA,,,"[81 FR 37887, June 10, 2016]","Working limits must be established for roadway maintenance machine movements on non-controlled track equipped with automatic block signal systems over which trains are permitted to exceed restricted speed (for purposes of this section, on-track movements prepared to stop within on-half the range of vision but not exceeding 25 mph). This section applies unless the railroad's operating rules protect the movements of roadway maintenance machines in a manner equivalent to that provided for by limiting all train and locomotive movements to restricted speed, and such equivalent level of protection is first approved in writing by FRA's Associate Administrator for Railroad Safety and Chief Safety Officer." 49:49:4.1.1.1.9.3.5.14,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.321 Exclusive track occupancy.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37887 June 10, 2016]","Working limits established on controlled track through the use of exclusive track occupancy procedures shall comply with the following requirements: (a) The track within working limits shall be placed under the control of one roadway worker in charge by either: (1) Authority issued to the roadway worker in charge by the train dispatcher or control operator who controls train movements on that track, (2) Flagmen stationed at each entrance to the track within working limits and instructed by the roadway worker in charge to permit the movement of trains and equipment into the working limits only as permitted by the roadway worker in charge, or (3) The roadway worker in charge causing fixed signals at each entrance to the working limits to display an aspect indicating “Stop.” (b) An authority for exclusive track occupancy given to the roadway worker in charge of the working limits shall be transmitted on a written or printed document directly, by relay through a designated employee, in a data transmission, or by oral communication, to the roadway worker in charge by the train dispatcher or control operator in charge of the track. (1) Where authority for exclusive track occupancy is transmitted orally, the authority shall be written as received by the roadway worker in charge and repeated to the issuing employee for verification. (2) The roadway worker in charge of the working limits shall maintain possession of the written or printed authority for exclusive track occupancy while the authority for the working limits is in effect. A data transmission of an authority displayed on an electronic screen may be used as a substitute for a written or printed document required under this paragraph. Electronic displays of authority shall comply with the requirements of § 214.322. (3) The train dispatcher or control operator in charge of the track shall make a written or electronic record of all authorities issued to establish exclusive track occupancy. (4) An authority shall specify a unique roadway work group number, an employee name, or a unique identifier. A railroad shall adopt procedures that require precise communication between trains and other on-track equipment and the roadway worker in charge or lone worker controlling the working limits in accordance with § 214.319. The procedures may permit communications to be made directly between a train or other on-track equipment and a roadway worker in charge or lone worker, or through a train dispatcher or control operator. (c) The extent of working limits established through exclusive track occupancy shall be defined by one of the following physical features clearly identifiable to a locomotive engineer or other person operating a train or railroad equipment: (1) A flagman with instructions and capability to hold all trains and equipment clear of the working limits; (2) A fixed signal that displays an aspect indicating “Stop”; (3) A station shown in the time-table, and identified by name with a sign, beyond which train movement is prohibited by train movement authority or the provisions of a direct train control system. (4) A clearly identifiable milepost sign beyond which train movement is prohibited by train movement authority or the provisions of a direct train control system; or (5) A clearly identifiable physical location prescribed by the operating rules of the railroad that trains may not pass without proper authority. (d) Movements of trains and roadway maintenance machines within working limits established through exclusive track occupancy shall be made only under the direction of the roadway worker in charge of the working limits. Such movements shall be at restricted speed unless a higher authorized speed has been specifically authorized by the roadway worker in charge of the working limits. (e) Working limits established by exclusive track occupancy authority may occur behind designated trains moving through the same limits in accordance with the following provisions: (1) The authority establishing working limits will only be considered to be in effect after it is confirmed by the roadway worker in charge or lone worker that the affected train(s) have passed the point to be occupied or fouled by: (i) Visually identifying the affected trains(s); or (ii) Direct radio contact with a crew member of the affected train(s); or (iii) Receiving information about the affected train from the train dispatcher or control operator. (2) When utilizing the provisions of paragraph (e)(1)(i) of this section, a railroad's operating rules shall include procedures prohibiting the affected train(s) from making a reverse movement into or within the limits being fouled or occupied. (3) After the roadway worker in charge or lone worker has confirmed that the affected trains(s) have passed the point to be occupied or fouled, the roadway worker in charge shall record on the authority the time of passage and engine number(s) of the affected trains(s). If the confirmation is by direct communication with the train(s), or through confirmation by the train dispatcher or control operator, the roadway worker in charge shall record the time of such confirmation and the engine number(s) of the affected trains on the authority. (4) A separate roadway work group afforded on-track safety by the roadway worker in charge of authority limits, and that is located away from the roadway worker in charge of authority limits, shall: (i) Occupy or foul the track only after receiving permission from the roadway worker in charge to occupy the working limits after the roadway worker charge has fulfilled the provisions of paragraph (e)(1) of this section; and (ii) Be accompanied by an employee qualified to the level of a roadway worker in charge who shall also have a copy of the authority and who shall independently execute the required communication requirements of paragraphs (e)(1) and (3) of this section. (5) Any subsequent train or on-track equipment movements within working limits after the passage of the affected train(s) shall be governed by paragraph (d) of this section." 49:49:4.1.1.1.9.3.5.15,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.322 Exclusive track occupancy, electronic display.",FRA,,,"[81 FR 37888, June 10, 2016, as amended at 87 FR 15143, Mar. 17, 2022]","(a) While it is in effect, all the contents of an authority electronically displayed shall be readily viewable by the roadway worker in charge that is using the authority to provide on-track safety for a roadway work group. (b) If the electronic display device malfunctions, fails, or cannot display an authority while it is in effect, the roadway worker in charge shall either obtain a written or printed copy of the authority in accordance with § 214.321 (except that on-track roadway maintenance machine and hi-rail movements must stop) or establish another form of on-track safety without delay. In the event that a written or printed copy of the authority cannot be obtained or another form of on-track safety cannot be established after failure of an electronic display device, the roadway worker in charge shall instruct all roadway workers to stop work and occupy a place of safety and conduct an on-track safety job briefing to determine the safe course of action with the roadway work group. (c) All authorized users of an electronic display system shall be uniquely identified to support individual accountability. A user may be a person, a process, or some other system that accesses or attempts to access an electronic display system to perform tasks or process an authority. (d) All authorized users of an electronic display system must be authenticated prior to being granted access to such system. The system shall ensure the confidentiality and integrity of all internally stored authentication data and protect it from access by unauthorized users. The authentication scheme shall utilize algorithms approved by the National Institute of Standards and Technology (NIST), or any similarly recognized and FRA approved standards body. (e) The integrity of all data must be ensured during transmission/reception, processing, and storage. All new electronic display systems implemented on or after July 1, 2017 shall utilize a Message Authentication Code (MAC) to ensure that all data is error free. The MAC shall utilize algorithms approved by NIST, or any similarly recognized and FRA approved standards body. Systems implemented prior to July 1, 2017 may utilize a Cyclical Redundancy Code (CRC) to ensure that all data is error free provided: (1) The collision rate for the CRC check utilized shall be less than or equal to 1 in 2 32 . Systems implemented prior to July 1, 2017 that do not utilize a CRC with a collision rate less than or equal to 1 in 2 32 must be retired or updated to utilize a MAC no later than July 1, 2018. (2) MAC and CRC checks shall only be used to verify the accuracy of an electronic authority data message and shall not be used in an error correction reconstruction of the data. An authority must fail if the MAC or CRC checks do not match. (f) Authorities transmitted to each electronic display device shall be retained in the device's non-volatile memory for not less than 72 hours. (g) If any electronic display device used to obtain an authority is involved in an accident/incident that is required to be reported to FRA under part 225 of this chapter, the railroad or employer that was using the device at the time of the accident shall, to the extent possible, and to the extent consistent with the safety of life and property, preserve the data recorded by each such device for analysis by FRA. This preservation requirement permits the railroad or employer to extract and analyze such data, provided the original downloaded data file, or an unanalyzed exact copy of it, shall be retained in secure custody and shall not be utilized for analysis or any other purpose except by direction of FRA or the National Transportation Safety Board. This preservation requirement shall expire one (1) year after the date of the accident unless FRA or the National Transportation Safety Board notifies the railroad in writing that the data are desired for analysis. (h) New electronic display systems implemented on or after July 1, 2017 shall provide Level 3 assurance as defined by NIST Special Publication 800-63-2, Electronic Authentication Guideline, “Computer Security,” August 2013. Systems implemented prior to July 1, 2017 shall provide Level 2 assurance. Systems implemented prior to July 1, 2017 that do not provide Level 2 or higher assurance must be retired, or updated to provide Level 2 assurance, no later than July 1, 2018. The incorporation by reference of this NIST Special Publication was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of the incorporated document from the National Institute of Standards and Technology, 100 Bureau Drive, Stop 8930, Gaithersburg, MD 20899-8930, http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-63-2.pdf . You may inspect a copy of the document at the Federal Railroad Administration, Docket Clerk, 1200 New Jersey Avenue SE., Washington, DC, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (i) For purposes of complying with paragraph (h) of this section, electronic display systems may use multi-factor authentication for digital authentication of the subject." 49:49:4.1.1.1.9.3.5.16,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.323 Foul time.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37888, June 10, 2016]","Working limits established on controlled track through the use of foul time procedures shall comply with the following requirements: (a) Foul time may be given orally or in writing by the train dispatcher or control operator only after that employee has withheld the authority of all trains or other on-track equipment to move into or within the working limits during the foul time period. (b) Each roadway worker in charge to whom foul time is transmitted orally shall repeat the track number or identifier, track limits and time limits of the foul time to the issuing employee for verification before the foul time becomes effective. (c) The train dispatcher or control operator shall not permit the movement of trains or other on-track equipment into working limits protected by foul time until the roadway worker in charge who obtained the foul time has reported clear of the track. (d) The roadway worker in charge shall not permit the movement of trains or other on-track equipment into or within working limits protected by foul time." 49:49:4.1.1.1.9.3.5.17,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.325 Train coordination.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37888, June 10, 2016]","Working limits established on controlled track by a roadway worker in charge through the use of train coordination shall comply with the following requirements: (a) Working limits established by train coordination shall be within the segments of track or tracks upon which only one train holds exclusive authority to move. (b) The roadway worker who establishes working limits by train coordination shall communicate with a member of the crew of the train holding the exclusive authority to move, and shall determine that: (1) The train is visible to the roadway worker who is establishing the working limits, (2) The train is stopped, (3) Further movements of the train will be made only as permitted by the roadway worker in charge of the working limits while the working limits remain in effect, and (4) The crew of the train will not give up its exclusive authority to move until the working limits have been released to the train crew by the roadway worker in charge of the working limits." 49:49:4.1.1.1.9.3.5.18,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.327 Inaccessible track.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37888, June 10, 2016]","(a) Working limits on non-controlled track shall be established by rendering the track within working limits physically inaccessible to trains at each possible point of entry by one of the following features: (1) A flagman with instructions and capability to hold all trains and equipment clear of the working limits; (2) A switch or derail aligned to prevent access to the working limits and secured with an effective securing device by the roadway worker in charge of the working limits; (3) A discontinuity in the rail that precludes passage of trains or engines into the working limits; (4) Working limits on controlled track that connects directly with the inaccessible track, established by the roadway worker in charge of the working limits on the inaccessible track; or (5) A remotely controlled switch aligned to prevent access to the working limits and secured by the control operator of such remotely controlled switch by application of a locking or blocking device to the control of that switch, when: (i) The control operator has secured the remotely controlled switch by applying a locking or blocking device to the control of the switch, and (ii) The control operator has notified the roadway worker who has established the working limits that the requested protection has been provided, and (iii) The control operator is not permitted to remove the locking or blocking device from the control of the switch until receiving permission to do so from the roadway worker who established the working limits. (6) A locomotive with or without cars placed to prevent access to the working limits at one or more points of entry to the working limits, provided the following conditions are met: (i) The roadway worker in charge who is responsible for establishing working limits communicates with a member of the crew assigned to the locomotive and determines that: (A) The locomotive is visible to the roadway worker in charge that is establishing the working limits; and (B) The locomotive is stopped. (ii) Further movements of the locomotive shall be made only as permitted by the roadway worker in charge controlling the working limits; (iii) The crew of the locomotive shall not leave the locomotive unattended or go off duty unless communication occurs with the roadway worker in charge and an alternate means of on-track safety protection has been established by the roadway worker in charge; and (iv) Cars coupled to the locomotive on the same end and on the same track as the roadway workers shall be connected to the train line air brake system and such system shall be charged with compressed air to initiate an emergency brake application in case of unintended uncoupling. Cars coupled to the locomotive on the same track on the opposite end of the roadway workers shall have sufficient braking capability to control their movement. (7) A railroad's procedure governing block register territory that prevents trains and other on-track equipment from occupying the track when the territory is under the control of a lone worker or roadway worker in charge. The roadway worker in charge or lone worker shall have the absolute right to render block register territory inaccessible under the other provisions of paragraph (a) of this section. (8) Railroad operating rules that prohibit train or engine or other on-track equipment movements on a main track within yard limits or restricted limits until the train or engine or on-track equipment receives notification of any working limits in effect and prohibit the train or engine or on-track equipment from entering working limits until permission is received by the roadway worker in charge. Such working limits shall be delineated with stop signs (flags), and where speeds are in excess of restricted speed and physical characteristics permit, also with advance signs (flags). (b) Trains and roadway maintenance machines within working limits established by means of inaccessible track shall move only under the direction of the roadway worker in charge of the working limits, and shall move at restricted speed. (c) No operable locomotives or other items of on-track equipment, except those present or moving under the direction of the roadway worker in charge of the working limits, shall be located within working limits established by means of inaccessible track." 49:49:4.1.1.1.9.3.5.19,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.329 Train approach warning provided by watchmen/lookouts.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","Roadway workers in a roadway work group who foul any track outside of working limits shall be given warning of approaching trains by one or more watchmen/lookouts in accordance with the following provisions: (a) Train approach warning shall be given in sufficient time to enable each roadway worker to move to and occupy a previously arranged place of safety not less than 15 seconds before a train moving at the maximum authorized speed on that track can pass the location of the roadway worker. The place of safety to be occupied upon the approach of a train may not be on a track, unless working limits are established on that track. (b) Watchmen/lookouts assigned to provide train approach warning shall devote full attention to detecting the approach of trains and communicating a warning thereof, and shall not be assigned any other duties while functioning as watchmen/lookouts. (c) The means used by a watchman/lookout to communicate a train approach warning shall be distinctive and shall clearly signify to all recipients of the warning that a train or other on-track equipment is approaching. (d) Every roadway worker who depends upon train approach warning for on-track safety shall maintain a position that will enable him or her to receive a train approach warning communicated by a watchman/lookout at any time while on-track safety is provided by train approach warning. (e) Watchmen/lookouts shall communicate train approach warnings by a means that does not require a warned employee to be looking in any particular direction at the time of the warning, and that can be detected by the warned employee regardless of noise or distraction of work. (f) Every roadway worker who is assigned the duties of a watchman/lookout shall first be trained, qualified and designated in writing by the employer to do so in accordance with the provisions of § 214.349. (g) Every watchman/lookout shall be provided by the employer with the equipment necessary for compliance with the on-track safety duties which the watchman/lookout will perform." 49:49:4.1.1.1.9.3.5.2,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.302 [Reserved],FRA,,,, 49:49:4.1.1.1.9.3.5.20,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.331 Definite train location.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","A roadway worker may establish on-track safety by using definite train location only where permitted by and in accordance with the following provisions: (a) A Class I railroad or a commuter railroad may only use definite train location to establish on-track safety at points where such procedures were in use on January 15, 1997. (b) Each Class I or commuter railroad shall include in its on-track safety program for approval by FRA in accordance with § 214.307 of this part a schedule for phase-out of the use of definite train location to establish on-track safety. (c) A railroad other than a Class I or commuter railroad may use definite train location to establish on-track safety on subdivisions only where: (1) Such procedures were in use on January 15, 1997, or (2) The number of trains operated on the subdivision does not exceed: (i) Three during any nine-hour period in which roadway workers are on duty, and (ii) Four during any twelve-hour period in which roadway workers are on duty. (d) Definite train location shall only be used to establish on-track safety according to the following provisions: (1) Definite train location information shall be issued only by the one train dispatcher who is designated to authorize train movements over the track for which the information is provided. (2) A definite train location list shall indicate all trains to be operated on the track for which the list is provided, during the time for which the list is effective. (3) Trains not shown on the definite train location list shall not be operated on the track for which the list is provided, during the time for which the list is effective, until each roadway worker to whom the list has been issued has been notified of the train movement, has acknowledged the notification to the train dispatcher, and has canceled the list. A list thus canceled shall then be invalid for on-track safety. (4) Definite train location shall not be used to establish on-track safety within the limits of a manual interlocking, or on track over which train movements are governed by a Traffic Control System or by a Manual Block System. (5) Roadway workers using definite train location for on-track safety shall not foul a track within ten minutes before the earliest time that a train is due to depart the last station at which time is shown in approach to the roadway worker's location nor until that train has passed the location of the roadway worker. (6) A railroad shall not permit a train to depart a location designated in a definite train location list before the time shown therein. (7) Each roadway worker who uses definite train location to establish on-track safety must be qualified on the relevant physical characteristics of the territory for which the train location information is provided. (e) Each on-track safety program that provides for the use of definite train location shall discontinue such use by June 12, 2017." 49:49:4.1.1.1.9.3.5.21,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.333 Informational line-ups of trains.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","(a) A railroad is permitted to include informational line-ups of trains in its on-track safety program for use only on subdivisions of that railroad upon which such procedure was in effect on March 14, 1996. (b) Each procedure for the use of informational line-ups of trains found in an on-track safety program shall include all provisions necessary to protect roadway workers using the procedure against being struck by trains or other on-track equipment. (c) Each on-track safety program that provides for the use of informational line-ups shall discontinue such use by June 12, 2017." 49:49:4.1.1.1.9.3.5.22,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.335 On-track safety procedures for roadway work groups, general.",FRA,,,"[81 FR 37889, June 12, 2016]","(a) No employer subject to the provisions of this part shall require or permit a roadway worker who is a member of a roadway work group to foul a track unless on-track safety is provided by either working limits, train approach warning, or definite train location in accordance with the applicable provisions of § 214.319, § 214.321, § 214.323, § 214.325, § 214.327, § 214.329, § 214.331, or § 214.336. (b) No roadway worker who is a member of a roadway work group shall foul a track without having been informed by the roadway worker in charge of the roadway work group that on-track safety is provided." 49:49:4.1.1.1.9.3.5.23,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.336 On-track safety procedures for certain roadway work groups and adjacent tracks.,FRA,,,"[76 FR 74615, Nov. 30, 2011, as amended at 79 FR 1766, Jan. 10, 2014]","(a) Procedures; general. (1) General rule. Except as provided in paragraph (e) of this section, on-track safety is required for each adjacent controlled track when a roadway work group with at least one of the roadway workers on the ground is engaged in a common task with on-track, self-propelled equipment or coupled equipment on an occupied track. The required on-track safety shall be established through § 214.319 (Working limits, generally) or § 214.329 (Train approach warning provided by watchmen/lookouts) and as more specifically described in this section. (2) Special circumstance arising in territories with at least three tracks, if an occupied track is between two adjacent controlled tracks. If an occupied track has two adjacent controlled tracks, and one of these adjacent controlled tracks has one or more train or other on-track equipment movements authorized or permitted at a speed of 25 mph or less (or 40 mph or less for one or more passenger train or other passenger on-track equipment movements), and the other adjacent controlled track has one or more concurrent train or other on-track equipment movements authorized or permitted at a speed over 25 mph (or over 40 mph for one or more passenger train or other passenger on-track equipment movements), the more restrictive procedures in paragraph (b) of this section apply. (3) Definitions. As used in this section— Adjacent controlled track means a controlled track whose track center is spaced 19 feet or less from the track center of the occupied track. Adjacent track means a controlled or non-controlled track whose track center is spaced less than 25 feet from the track center of the occupied track. Inter-track barrier means a continuous barrier of a permanent or semi-permanent nature that spans the entire work area, that is at least four feet in height, and that is of sufficient strength to prevent a roadway worker from fouling the adjacent track. Minor correction means one or more repairs of a minor nature, including, but not limited to, welding, spiking, anchoring, hand tamping, and joint bolt replacement, that are accomplished with hand tools or handheld, hand-supported, or hand-guided power tools. The term does not include machine spiking, machine tamping, or any similarly distracting repair. Occupied track means a track on which on-track, self-propelled equipment or coupled equipment is authorized or permitted to be located while engaged in a common task with a roadway work group with at least one of the roadway workers on the ground. (b) Procedures for adjacent-controlled-track movements over 25 mph (or over 40 mph if passenger movements). If a train or other on-track equipment is authorized to move on an adjacent controlled track at a speed greater than 25 mph, or at a speed greater than 40 mph for a passenger train or other passenger on-track equipment movement, each roadway worker in the roadway work group that is affected by such movement must comply with the following procedures: (1) Ceasing work and occupying a predetermined place of safety. Except for the work activities as described in paragraph (e) of this section, each affected roadway worker shall, as described in Table 1 of this section, cease all on-ground work and equipment movement that is being performed on or between the rails of the occupied track or on one or both sides of the occupied track, and occupy a predetermined place of safety upon receiving either a watchman/lookout warning or, alternatively, a notification that the roadway worker in charge intends to permit one or more train or other on-track equipment movements through the working limits on the adjacent controlled track. (2) Resuming work. (i) An affected roadway worker may resume on-ground work and equipment movement (on or between the rails of the occupied track or on one or both sides of the occupied track as described in Table 1 of this section) only after the trailing-end of all trains or other on-track equipment moving on the adjacent controlled track (for which a warning or notification has been received in accordance with paragraph (b)(1) of this section) has passed and remains ahead of that roadway worker. (ii) If the train or other on-track equipment stops before its trailing-end has passed all of the affected roadway workers in the roadway work group, the work to be performed (on or between the rails of the occupied track or on one or both sides of the occupied track as described in Table 1 of this section) ahead of the trailing-end of the train or other on-track equipment on the adjacent controlled track may resume only— (A) If on-track safety through train approach warning (§ 214.329) has been established on the adjacent controlled track; or (B) After the roadway worker in charge has communicated with a member of the train crew or the on-track equipment operator and established that further movements of such train or other on-track equipment shall be made only as permitted by the roadway worker in charge. (c) Procedures for adjacent-controlled-track movements 25 mph or less (or 40 mph or less if passenger movements). If a train or other on-track equipment is authorized or permitted to move on an adjacent controlled track at a speed of 25 mph or less, or at a speed of 40 mph or less for a passenger train or other passenger on-track equipment movement, each roadway worker in the roadway work group that is affected by such movement must comply with the procedures listed in paragraph (b) of this section, except that equipment movement on the rails of the occupied track and on-ground work performed exclusively between the rails ( i.e., not breaking the plane of the rails) of the occupied track may continue, provided that no on-ground work is performed within the areas 25 feet in front of and 25 feet behind any on-track, self-propelled equipment or coupled equipment permitted to move on the occupied track. (d) Discretion of roadway worker in charge. Nothing in this subpart prohibits the roadway worker in charge from establishing on-track safety on one or more adjacent tracks as he or she deems necessary consistent with both the purpose and requirements of this subpart. (e) Exceptions to certain requirements for adjacent-controlled-track on-track safety. No on-track safety (other than that required by paragraph (f) of this section or provided under paragraph (d) of this section) is required by paragraphs (a) through (c) of this section for an adjacent controlled track during the times that the roadway work group is exclusively performing one or more of the following work activities: (1) On-ground work performed on a side of the occupied track meeting specified condition(s). A roadway work group with all of its on-ground roadway workers (other than those performing work in accordance with another exception in paragraph (e) of this section) performing work while exclusively positioned on a side of the occupied track as follows and as further specified in Table 1 of this section: (i) The side with no adjacent track; (ii) The side with one or more adjacent tracks, the closest of which has working limits on it and no movements permitted within such working limits by the roadway worker in charge; or (iii) The side with one or more adjacent tracks, provided that that it has an inter-track barrier between the occupied track and the closest adjacent track on that side. (2) Maintenance or repairs performed either alongside, or within the perimeter of, a roadway maintenance machine or coupled equipment on the occupied track. (i) One or more roadway workers performing maintenance or repairs alongside a roadway maintenance machine or coupled equipment, provided that such machine or equipment would effectively prevent the worker from fouling the adjacent controlled track on the other side of such equipment, and that such maintenance or repairs are performed while positioned on a side of the occupied track as described in paragraph (e)(1)(i), (ii), or (iii) and Table 1 of this section. (ii) One or more roadway workers on or under a roadway maintenance machine or coupled equipment performing maintenance or repairs within the perimeter of the machine or equipment, provided that no part of their person breaks the plane of the rail of the occupied track except when toward one of the sides of the occupied track as described in paragraph (e)(1)(i), (ii), or (iii) and Table 1 of this section. A boom or other equipment extending beyond the body of a roadway maintenance machine or coupled equipment toward an adjacent controlled track is not considered to be within the perimeter of the machine or coupled equipment. (3) Work activities involving certain equipment and purposes. One or more on-ground roadway workers engaged in a common task on an occupied track with on-track, self-propelled equipment or coupled equipment consisting exclusively of one or more of the types of equipment described in paragraphs (e)(3)(i) through (iii) of this section. If such a roadway work group (“excepted group”) is authorized or permitted to operate on the same occupied track and within the working limits of a separate roadway work group performing work that is subject to the requirements of this section (“non-excepted group”) or vice versa ( i.e., a non-excepted group is authorized or permitted to operate on the same occupied track and within the working limits of an excepted group), the groups must conduct an on-track safety job briefing to determine if adjacent-controlled-track on-track safety is necessary for the excepted group. Such determination shall be made by the roadway worker in charge of the working limits; however, if the groups are in such proximity where the ability of the roadway workers in the excepted group to hear or see approaching trains and other on-track equipment is impaired by background noise, lights, sight obstructions or any other physical conditions caused by the equipment, then this exception does not apply, and adjacent-controlled-track on-track safety must be provided to both groups. This exception otherwise applies to work activities involving one or more of the following types of equipment: (i) A hi-rail vehicle or other rail-bound vehicle (other than a catenary maintenance tower vehicle) being used for inspection or minor correction purposes, provided that such vehicle is not coupled to one or more railroad cars. In accordance with § 214.315(a), where multiple hi-rail or rail-bound vehicles being used for inspection or minor correction are engaged in a common task, the on-track safety job briefing shall include discussion of the nature of the work to be performed to determine if adjacent-controlled-track on-track safety is necessary. (ii) An automated inspection car being used for inspection or minor correction purposes. (iii) A catenary maintenance tower car or vehicle, provided that all of the on-ground workers engaged in the common task (other than those performing work in accordance with another exception in paragraph (e) of this section) are positioned within the gage of the occupied track for the sole purpose of applying or removing grounds. (f) Procedures for components of roadway maintenance machines fouling an adjacent controlled track. Except as provided for in § 214.341(c), a component of a roadway maintenance machine shall not foul an adjacent controlled track unless working limits have been established on the adjacent-controlled-track and there are no movements permitted within the working limits by the roadway worker in charge that would affect any of the roadway workers engaged in a common task with such machine. Table 1—Summary of On-Track Safety Procedures for Certain Roadway Work Groups and Adjacent Tracks 1 As used in the above table, a “predetermined place of safety” (or “PPOS”) means a specific location that an affected roadway worker must occupy upon receiving a watchman/lookout's warning of approaching movement(s) (“warning”) or a roadway worker in charge's (“RWIC's”) notification of pending movement(s) on an adjacent track (“notification”), as designated during the on-track safety job briefing required by § 214.315. The PPOS may not be on a track, unless the track has working limits on it and no movements permitted within such working limits by the RWIC. Thus, under these circumstances, the space between the rails of the occupied track (No. 2 in this table) may be designated as a place to remain in position or to otherwise occupy upon receiving a warning or notification. The RWIC must determine any change to a PPOS, and communicate such change to all affected roadway workers through an updated on-track safety job briefing. 2 On-ground work is prohibited in the areas 25′ in front of and 25′ behind equipment on the occupied track (No. 2), and must not break the plane of a rail on No. 2 towards a side of No. 2 unless work is permitted on that side. Note, however, that per § 214.336(a)(2), work would no longer be permitted to continue on or between the rails of the occupied track during movement(s) on an adjacent controlled track at 25 mph or less (or at 40 mph or less for passenger trains or other passenger on-track equipment movements) if there is a simultaneous movement on the other adjacent controlled track at more than 25 mph (or at more than 40 mph per hour for passenger train movements or other passenger on-track equipment movements). 3 Work that does not break the plane of the near running rail of the occupied track (No. 2) is not required to cease during such movements; work that breaks the plane of the near running rail of the occupied track may also continue: 1) during the times that work is permitted on or between the rails of the occupied track in accordance with § 214.336(c) (Procedures for adjacent-controlled-track movements 25 mph or less, or 40 mph or less for passenger train movements or other passenger on-track equipment movements); or 2) if such work is performed alongside or within the perimeter of a roadway maintenance machine or coupled equipment in accordance with § 214.336(e)(2)." 49:49:4.1.1.1.9.3.5.24,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.337 On-track safety procedures for lone workers.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","(a) A lone worker who fouls a track while performing routine inspection or minor correction may use individual train detection to establish on-track safety only where permitted by this section and the on-track safety program of the railroad. (b) A lone worker retains an absolute right to use on-track safety procedures other than individual train detection if he or she deems it necessary, and to occupy a place of safety until such other form of on-track safety can be established. (c) Individual train detection may be used to establish on-track safety only: (1) By a lone worker who has been trained, qualified, and designated to do so by the employer in accordance with § 214.347 of this subpart; (2) While performing routine inspection and minor correction work; (3) On track outside the limits of a manual interlocking, a controlled point (except those consisting of signals only), or a remotely controlled hump yard facility; (4) Where the lone worker is able to visually detect the approach of a train moving at the maximum speed authorized on that track, and move to a previously determined place of safety, not less than 15 seconds before the train would arrive at the location of the lone worker; (5) Where no power-operated tools or roadway maintenance machines are in use within the hearing of the lone worker; and (6) Where the ability of the lone worker to hear and see approaching trains and other on-track equipment is not impaired by background noise, lights, precipitation, fog, passing trains, or any other physical conditions. (d) The place of safety to be occupied by a lone worker upon the approach of a train may not be on a track, unless working limits are established on that track. (e) A lone worker using individual train detection for on-track safety while fouling a track may not occupy a position or engage in any activity that would interfere with that worker's ability to maintain a vigilant lookout for, and detect the approach of, a train moving in either direction as prescribed in this section. (f) A lone worker who uses individual train detection to establish on-track safety shall first complete a written Statement of On-track Safety. The Statement shall designate the limits of the track for which it is prepared and the date and time for which it is valid. The statement shall show the maximum authorized speed of trains within the limits for which it is prepared, and the sight distance that provides the required warning of approaching trains. The lone worker using individual train detection to establish on-track safety shall produce the Statement of On-track Safety when requested by a representative of the Federal Railroad Administrator. (g) Individual train detection shall not be used to provide on-track safety for a lone worker using a roadway maintenance machine, equipment, or material that cannot be readily removed by hand." 49:49:4.1.1.1.9.3.5.25,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.339 Audible warning from trains.,FRA,,,"[81 FR 37889, June 10, 2016]","(a) Each railroad shall have in effect and comply with written procedures that prescribe effective requirements for audible warning by horn and/or bell for trains and locomotives approaching any roadway workers or roadway maintenance machines that are either on the track on which the movement is occurring, or about the track if the roadway workers or roadway maintenance machines are at risk of fouling the track. At a minimum, such written procedures shall address: (1) Initial horn warning; (2) Subsequent warning(s); and (3) Alternative warnings in areas where sounding the horn adversely affects roadway workers ( e.g., in tunnels and terminals). (b) Such audible warning shall not substitute for on-track safety procedures prescribed in this part." 49:49:4.1.1.1.9.3.5.26,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.341 Roadway maintenance machines.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 79 FR 66501, Nov. 7, 2014]","(a) Each employer shall include in its on-track safety program specific provisions for the safety of roadway workers who operate or work near roadway maintenance machines. Those provisions shall address: (1) Training and qualification of operators of roadway maintenance machines. (2) Establishment and issuance of safety procedures both for general application and for specific types of machines. (3) Communication between machine operators and roadway workers assigned to work near or on roadway maintenance machines. (4) Spacing between machines to prevent collisions. (5) Space between machines and roadway workers to prevent personal injury. (6) Maximum working and travel speeds for machines dependent upon weather, visibility, and stopping capabilities. (b) Instructions for the safe operation of each roadway machine shall be provided and maintained with each machine large enough to carry the instruction document. (1) No roadway worker shall operate a roadway maintenance machine without having been trained in accordance with § 214.355. (2) No roadway worker shall operate a roadway maintenance machine without having knowledge of the safety instructions applicable to that machine. For purposes of this paragraph, the safety instructions applicable to that machine means: (i) The manufacturer's instruction manual for that machine; or (ii) The safety instructions developed to replace the manufacturer's safety instructions when the machine has been adapted for a specific railroad use. Such instructions shall address all aspects of the safe operation of the crane and shall be as comprehensive as the manufacturer's safety instructions they replace. (3) No employer shall assign roadway workers to work near roadway machines unless the roadway worker has been informed of the safety procedures applicable to persons working near the roadway machines and has acknowledged full understanding. (c) Components of roadway maintenance machines shall be kept clear of trains passing on adjacent tracks. Where operating conditions permit roadway maintenance machines to be less than four feet from the rail of an adjacent track, the on-track safety program of the railroad shall include the procedural instructions necessary to provide adequate clearance between the machine and passing trains." 49:49:4.1.1.1.9.3.5.27,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.343 Training and qualification, general.",FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","(a) No employer shall assign an employee to perform the duties of a roadway worker, and no employee shall accept such assignment, unless that employee has received training in the on-track safety procedures associated with the assignment to be performed, and that employee has demonstrated the ability to fulfill the responsibilities for on-track safety that are required of an individual roadway worker performing that assignment. (b) Each employer shall provide to all roadway workers in its employ initial or recurrent training once every calendar year on the on-track safety rules and procedures that they are required to follow. (c) Except as provided for in § 214.353, railroad employees other than roadway workers, who are associated with on-track safety procedures, and whose primary duties are concerned with the movement and protection of trains, shall be trained to perform their functions related to on-track safety through the training and qualification procedures prescribed by the operating railroad for the primary position of the employee, including maintenance of records and frequency of training. (d) Each employer of roadway workers shall maintain written or electronic records of each roadway worker qualification in effect. Each record shall include the name of the employee, the type of qualification made, and the most recent date of qualification. These records shall be kept available for inspection and photocopying by the Federal Railroad Administrator during regular business hours." 49:49:4.1.1.1.9.3.5.28,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.345 Training for all roadway workers.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","Consistent with § 214.343(b), the training of all roadway workers shall include, as a minimum, the following: (a) Recognition of railroad tracks and understanding of the space around them within which on-track safety is required. (b) The functions and responsibilities of various persons involved with on-track safety procedures. (c) Proper compliance with on-track safety instructions given by persons performing or responsible for on-track safety functions. (d) Signals given by watchmen/lookouts, and the proper procedures upon receiving a train approach warning from a lookout. (e) The hazards associated with working on or near railroad tracks, including review of on-track safety rules and procedures. (f) Instruction on railroad safety rules adopted to comply with § 214.317(b)." 49:49:4.1.1.1.9.3.5.29,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.347 Training and qualification for lone workers.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37889, June 10, 2016]","Each lone worker shall be trained and qualified by the employer to establish on-track safety in accordance with the requirements of this section, and must be authorized to do so by the railroad that conducts train operations on those tracks. (a) The training and qualification for lone workers shall include, as a minimum, consideration of the following factors: (1) Detection of approaching trains and prompt movement to a place of safety upon their approach. (2) Determination of the distance along the track at which trains must be visible in order to provide the prescribed warning time. (3) Rules and procedures prescribed by the railroad for individual train detection, establishment of working limits, and definite train location. (4) On-track safety procedures to be used in the territory on which the employee is to be qualified and permitted to work alone. (5) Alternative means to access the information in a railroad's on-track safety manual when a lone worker's duties make it impracticable for the on-track safety manual to be readily available. (b) Initial and periodic (as specified by § 243.201 of this chapter) qualification of a lone worker shall be evidenced by demonstrated proficiency." 49:49:4.1.1.1.9.3.5.3,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,"§ 214.303 Railroad on-track safety programs, generally.",FRA,,,,"(a) Each railroad to which this part applies shall adopt and implement a program that will afford on-track safety to all roadway workers whose duties are performed on that railroad. Each such program shall provide for the levels of protection specified in this subpart. (b) Each on-track safety program adopted to comply with this part shall include procedures to be used by each railroad for monitoring effectiveness of and compliance with the program." 49:49:4.1.1.1.9.3.5.30,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.349 Training and qualification of watchmen/lookouts.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37890, June 10, 2016]","(a) The training and qualification for roadway workers assigned the duties of watchmen/lookouts shall include, as a minimum, consideration of the following factors: (1) Detection and recognition of approaching trains. (2) Effective warning of roadway workers of the approach of trains. (3) Determination of the distance along the track at which trains must be visible in order to provide the prescribed warning time. (4) Rules and procedures of the railroad to be used for train approach warning. (b) Initial and periodic (as specified by § 243.201 of this chapter) qualification of a watchman/lookout shall be evidenced by demonstrated proficiency." 49:49:4.1.1.1.9.3.5.31,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.351 Training and qualification of flagmen.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37890, June 10, 2016]","(a) The training and qualification for roadway workers assigned the duties of flagmen shall include, as a minimum, the content and application of the operating rules of the railroad pertaining to giving proper stop signals to trains and holding trains clear of working limits. (b) Initial and periodic (as specified by § 243.201 of this chapter) qualification of a flagman shall be evidenced by demonstrated proficiency." 49:49:4.1.1.1.9.3.5.32,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.353 Training and qualification of each roadway worker in charge.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37890, June 10, 2016]","(a) The training and qualification of each roadway worker in charge, or any other employee acting as a roadway worker in charge ( e.g., a conductor or a brakeman), who provides for the on-track safety of roadway workers through establishment of working limits or the assignment and supervision of watchmen/lookouts or flagmen shall include, at a minimum: (1) All the on-track safety training and qualification required of the roadway workers to be supervised and protected, including the railroad's procedures governing good faith challenges in §§ 214.311(b) and (c) and 214.313(d). (2) The content and application of the operating rules of the railroad pertaining to the establishment of working limits. (3) The content and application of the rules of the railroad pertaining to the establishment or train approach warning. (4) The relevant physical characteristics of the territory of the railroad upon which the roadway worker is qualified. (5) The procedures required to ensure that the roadway worker in charge of the on-track safety of group(s) of roadway workers remains immediately accessible and available to all roadway workers being protected under the working limits or other provisions of on-track safety established by the roadway worker in charge. (b) Initial and periodic (as specified by § 243.201 of this chapter) qualification of a roadway worker in charge shall be evidenced by demonstrated proficiency." 49:49:4.1.1.1.9.3.5.33,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.355 Training and qualification of each roadway worker in on-track safety for operators of roadway maintenance machines.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 81 FR 37890, June 10, 2016]","(a) The training and qualification of roadway workers who operate roadway maintenance machines shall include, as a minimum: (1) Procedures to prevent a person from being struck by the machine when the machine is in motion or operation. (2) Procedures to prevent any part of the machine from being struck by a train or other equipment on another track. (3) Procedures to provide for stopping the machine short of other machines or obstructions on the track. (4) Methods to determine safe operating procedures for each machine that the operator is expected to operate. (b) Initial and periodic (as specified by § 243.201 of this chapter) qualification of a roadway worker to operate roadway maintenance machines shall be evidenced by demonstrated proficiency." 49:49:4.1.1.1.9.3.5.34,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.357 Training and qualification for operators of roadway maintenance machines equipped with a crane.,FRA,,,"[79 FR 66501, Nov. 7, 2014]","(a) In addition to the general training and qualification requirements for operators of roadway maintenance machines set forth in §§ 214.341 and 214.355 of this subpart, each employer shall adopt and comply with a training and qualification program for operators of roadway maintenance machines equipped with a crane to ensure the safe operation of such machines. (b) Each employer's training and qualification program for operators of roadway maintenance machines equipped with a crane shall require initial and periodic qualification of each operator of a roadway maintenance machine equipped with a crane and shall include: (1) Procedures for determining that the operator has the skills to safely operate each machine the person is authorized to operate; and (2) Procedures for determining that the operator has the knowledge to safely operate each machine the person is authorized to operate. Such procedures shall determine that either: (i) The operator has knowledge of the safety instructions ( i.e., the manufacturer's instruction manual) applicable to that machine; or (ii) The operator has knowledge of the safety instructions developed to replace the manufacturer's safety instructions when the machine has been adapted for a specific railroad use. Such instructions shall address all aspects of the safe operation of the crane and shall be as comprehensive as the manufacturer's safety instructions they replace. (c) Each employer shall maintain records that form the basis of the training and qualification determinations of each operator of roadway maintenance machines equipped with a crane that it employs. (d) Availability of records: Each employer required to maintain records under this part shall make all records available for inspection and copying/photocopying to representatives of FRA, upon request during normal business hours. (e) Training conducted by an employer in accordance with operator qualification and certification required by the Department of Labor (29 CFR 1926.1427) may be used to satisfy the training and qualification requirements of this section." 49:49:4.1.1.1.9.3.5.4,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.305 [Reserved],FRA,,,, 49:49:4.1.1.1.9.3.5.5,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.307 On-track safety programs.,FRA,,,"[81 FR 37885, June 10, 2016]","(a) Each railroad subject to this part shall maintain and have in effect an on-track safety program which complies with the requirements of this subpart. New railroads must have an on-track safety program in effect by the date on which operations commence. The on-track safety program shall be retained at a railroad's system headquarters and division headquarters, and shall be made available to representatives of the FRA for inspection and copying during normal business hours. Each railroad to which this part applies is authorized to retain its program by electronic recordkeeping in accordance with §§ 217.9(g) and 217.11(c) of this chapter. (b) Each railroad shall notify, in writing, the Associate Administrator for Safety and Chief Safety Officer, Federal Railroad Administration, RRS-15, 1200 New Jersey Avenue SE., Washington, DC 20590, not less than one month before its on-track safety program becomes effective. The notification shall include the effective date of the program and the name, title, address and telephone number of the primary person to be contacted with regard to review of the program. This notification procedure shall also apply to subsequent changes to a railroad's on-track safety program. (c) Upon review of a railroad's on-track safety program, the FRA Associate Administrator for Railroad Safety and Chief Safety Officer may, for cause stated, may disapprove the program. Notification of such disapproval shall be made in writing and specify the basis for the disapproval decision. If the Associate Administrator for Railroad Safety and Chief Safety Officer disapproves the program: (1) The railroad has 35 days from the date of the written notification of such disapproval to: (i) Amend its program and submit it to the Associate Administrator for Railroad Safety and Chief Safety Officer for approval; or (ii) Provide a written response in support of its program to the Associate Administrator for Railroad Safety and Chief Safety Officer. (2) FRA's Associate Administrator for Railroad Safety and Chief Safety Officer will subsequently issue a written decision either approving or disapproving the railroad's program. (3) Failure to submit to FRA an amended program or provide a written response in accordance with this paragraph will be considered a failure to implement an on-track safety program under this subpart." 49:49:4.1.1.1.9.3.5.6,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.309 On-track safety manual.,FRA,,,"[81 FR 37885, June 10, 2016]","(a) The applicable on-track safety manual (as defined by § 214.7) shall be readily available to all roadway workers. Each roadway worker in charge responsible for the on-track safety of others, and each lone worker, shall be provided with and shall maintain a copy of the on-track safety manual. (b) When it is impracticable for the on-track safety manual to be readily available to a lone worker, the employer shall establish provisions for such worker to have alternative access to the information in the manual. (c) Changes to the on-track safety manual may be temporarily published in bulletins or notices. Such publications shall be retained along with the on-track safety manual until fully incorporated into the manual." 49:49:4.1.1.1.9.3.5.7,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.311 Responsibility of employers.,FRA,,,,"(a) Each employer is responsible for the understanding and compliance by its employees with its rules and the requirements of this part. (b) Each employer shall guarantee each employee the absolute right to challenge in good faith whether the on-track safety procedures to be applied at the job location comply with the rules of the operating railroad, and to remain clear of the track until the challenge is resolved. (c) Each employer shall have in place a written procedure to achieve prompt and equitable resolution of challenges made in accordance with §§ 214.311(b) and 214.313(d)." 49:49:4.1.1.1.9.3.5.8,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.313 Responsibility of individual roadway workers.,FRA,,,,"(a) Each roadway worker is responsible for following the on-track safety rules of the railroad upon which the roadway worker is located. (b) A roadway worker shall not foul a track except when necessary for the performance of duty. (c) Each roadway worker is responsible to ascertain that on-track safety is being provided before fouling a track. (d) Each roadway worker may refuse any directive to violate an on-track safety rule, and shall inform the employer in accordance with § 214.311 whenever the roadway worker makes a good faith determination that on-track safety provisions to be applied at the job location do not comply with the rules of the operating railroad." 49:49:4.1.1.1.9.3.5.9,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,C,Subpart C—Roadway Worker Protection,,§ 214.315 Supervision and communication.,FRA,,,"[61 FR 65976, Dec. 16, 1996, as amended at 76 FR 74614, Nov. 30, 2011; 81 FR 37885, June 10, 2016]","(a) When an employer assigns a duty to a roadway worker that calls for that employee to foul a track, the employer shall provide the employee with an on-track safety job briefing that, at a minimum, includes the following: (1) Information on the means by which on-track safety is to be provided for each track identified to be fouled; (2) Instruction on each on-track safety procedure to be followed; (3) Information about any adjacent tracks, on-track safety for such tracks, if required by this subpart or deemed necessary by the roadway worker in charge, and identification of any roadway maintenance machines that will foul such tracks; (4) A discussion of the nature of the work to be performed and the characteristics of the work location to ensure compliance with this subpart; and (5) Information on the accessibility of the roadway worker in charge and alternative procedures in the event the roadway worker in charge is no longer accessible to the members of the roadway work group. (b) A job briefing for on-track safety shall be deemed complete only after the roadway worker(s) has acknowledged understanding of the on-track safety procedures and instructions presented. (c) Every roadway work group whose duties require fouling a track shall have one roadway worker in charge designated by the employer to provide on-track safety for all members of the group. The designated person shall be qualified under the rules of the railroad that conducts train operations on those tracks to provide the protection necessary for on-track safety of each individual in the group. The responsible person may be designated generally, or specifically for a particular work situation. (d) Before any member of a roadway work group fouls a track, the roadway worker in charge designated under paragraph (c) of this section shall inform each roadway worker of the on-track safety procedures to be used and followed during the performance of the work at that time and location. Each roadway worker shall again be so informed at any time the on-track safety procedures change during the work period. Such information shall be given to all roadway workers affected before the change is effective, except in cases of emergency. Any roadway workers who, because of an emergency, cannot be notified in advance shall be immediately warned to leave the fouling space and shall not return to the fouling space until on-track safety is re-established. (e) Each lone worker shall communicate at the beginning of each duty period with a supervisor or another designated employee to receive an on-track safety job briefing and to advise of his or her planned itinerary and the procedures that he or she intends to use for on-track safety. When communication channels are disabled, the job briefing shall be conducted as soon as possible after the beginning of the work period when communications are restored." 49:49:4.1.1.1.9.4.5.1,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.501 Purpose and scope.,FRA,,,,"(a) The purpose of this subpart is to prevent accidents and casualties caused by the lawful operation of on-track roadway maintenance machines and hi-rail vehicles. (b) This subpart prescribes minimum safety standards for on-track roadway maintenance machines and hi-rail vehicles. An employer may prescribe additional or more stringent standards that are consistent with this subpart. (c) Any working condition that involves the protection of employees engaged in roadway maintenance duties covered by this subpart but is not within the subject matter addressed by this subpart, including employee exposure to noise, shall be governed by the regulations of the U.S. Department of Labor, Occupational Safety and Health Administration." 49:49:4.1.1.1.9.4.5.10,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.518 Safe and secure positions for riders.,FRA,,,"[69 FR 8839, Feb. 26, 2004]","On or after March 1, 2004, a roadway worker, other than the machine operator, is prohibited from riding on any on-track roadway maintenance machine unless a safe and secure position for each roadway worker on the machine is clearly identified by stenciling, marking, or other written notice." 49:49:4.1.1.1.9.4.5.11,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,"§ 214.519 Floors, decks, stairs, and ladders of on-track roadway maintenance machines.",FRA,,,,"Floors, decks, stairs, and ladders of on-track roadway maintenance machines shall be of appropriate design and maintained to provide secure access and footing, and shall be free of oil, grease, or any obstruction which creates a slipping, falling, or fire hazard." 49:49:4.1.1.1.9.4.5.12,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.521 Flagging equipment for on-track roadway maintenance machines and hi-rail vehicles.,FRA,,,"[69 FR 8839, Feb. 26, 2004]","Each on-track roadway maintenance machine and hi-rail vehicle shall have on board a flagging kit that complies with the operating rules of the railroad if: (a) The equipment is operated over trackage subject to a railroad operating rule requiring flagging; and (b)(1) The equipment is not part of a roadway work group; or (2) The equipment is the lead or trailing piece of equipment in a roadway work group operating under the same occupancy authority." 49:49:4.1.1.1.9.4.5.13,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.523 Hi-rail vehicles.,FRA,,,,"(a) The hi-rail gear of all hi-rail vehicles shall be inspected for safety at least annually and with no more than 14 months between inspections. Tram, wheel wear, and gage shall be measured and, if necessary, adjusted to allow the vehicle to be safely operated. (b) Each employer shall keep records pertaining to compliance with paragraph (a) of this section. Records may be kept on forms provided by the employer or by electronic means. The employer shall retain the record of each inspection until the next required inspection is performed. The records shall be made available for inspection and copying during normal business hours by representatives of FRA and States participating under part 212 of this chapter. The records may be kept on the hi-rail vehicle or at a location designated by the employer. (c) A new hi-rail vehicle shall be equipped with: (1) An automatic change-of-direction alarm or backup alarm that provides an audible signal at least three seconds long and distinguishable from the surrounding noise; and (2) An operable 360-degree intermittent warning light or beacon mounted on the outside of the vehicle. (d)(1) The operator of a hi-rail vehicle shall check the vehicle for compliance with this subpart, prior to using the vehicle at the start of the operator's work shift. (2) A non-complying condition that cannot be repaired immediately shall be tagged and dated in a manner prescribed by the employer and reported to the designated official. (3) Non-complying automatic change-of-direction alarms, backup alarms, and 360-degree intermittent warning lights or beacons shall be repaired or replaced as soon as practicable within seven calendar days." 49:49:4.1.1.1.9.4.5.14,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.525 Towing with on-track roadway maintenance machines or hi-rail vehicles.,FRA,,,,"(a) When used to tow pushcars or other maintenance-of-way equipment, each on-track roadway maintenance machine or hi-rail vehicle shall be equipped with a towing bar or other coupling device that provides a safe and secure attachment. (b) An on-track roadway maintenance machine or hi-rail vehicle shall not be used to tow pushcars or other maintenance-of-way equipment if the towing would cause the machine or hi-rail vehicle to exceed the capabilities of its braking system. In determining the limit of the braking system, the employer must consider the track grade (slope), as well as the number and weight of pushcars or other equipment to be towed." 49:49:4.1.1.1.9.4.5.15,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.527 On-track roadway maintenance machines; inspection for compliance and schedule for repairs.,FRA,,,,"(a) The operator of an on-track roadway maintenance machine shall check the machine components for compliance with this subpart, prior to using the machine at the start of the operator's work shift. (b) Any non-complying condition that cannot be repaired immediately shall be tagged and dated in a manner prescribed by the employer and reported to the designated official. (c) The operation of an on-track roadway maintenance machine with a non-complying condition shall be governed by the following requirements: (1) An on-track roadway maintenance machine with headlights or work lights that are not in compliance may be operated for a period not exceeding 7 calendar days and only during the period between one-half hour before sunrise and one-half hour after sunset; (2) A portable horn may be substituted for a non-complying or missing horn for a period not exceeding seven calendar days; (3) A fire extinguisher readily available for use may temporarily replace a missing, defective or discharged fire extinguisher on a new on-track roadway maintenance machine for a period not exceeding 7 calendar days, pending the permanent replacement or repair of the missing, defective or used fire extinguisher; (4) Non-complying automatic change-of-direction alarms, backup alarms, and 360-degree intermittent warning lights or beacons shall be repaired or replaced as soon as practicable within 7 calendar days; and (5) A structurally defective or missing operator's seat shall be replaced or repaired within 24 hours or by the start of the machine's next tour of duty, whichever is later. The machine may be operated for the remainder of the operator's tour of duty if the defective or missing operator's seat does not prevent its safe operation." 49:49:4.1.1.1.9.4.5.16,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.529 In-service failure of primary braking system.,FRA,,,,"(a) In the event of a total in-service failure of its primary braking system, an on-track roadway maintenance machine may be operated for the remainder of its tour of duty with the use of a secondary braking system or by coupling to another machine, if such operations may be done safely. (b) If the total in-service failure of an on-track roadway maintenance machine's primary braking system occurs where other equipment is not available for coupling, the machine may, if it is safe to do so, travel to a clearance or repair point where it shall be placed out of service until repaired." 49:49:4.1.1.1.9.4.5.17,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.531 Schedule of repairs; general.,FRA,,,,"Except as provided in §§ 214.527(c)(5), 214.529, and 214.533, an on-track roadway maintenance machine or hi-rail vehicle that does not meet all the requirements of this subpart shall be brought into compliance as soon as practicable within seven calendar days. If repairs are not made within seven calendar days, the on-track roadway maintenance machine or hi-rail vehicle shall be placed out of on-track service." 49:49:4.1.1.1.9.4.5.18,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.533 Schedule of repairs subject to availability of parts.,FRA,,,,"(a) The employer shall order a part necessary to repair a non-complying condition on an on-track roadway maintenance machine or a hi-rail vehicle by the end of the next business day following the report of the defect. (b) When the employer cannot repair a non-complying condition as required by § 214.531 because of the temporary unavailability of a necessary part, the employer shall repair the on-track roadway maintenance machine or hi-rail vehicle within seven calendar days after receiving the necessary part. The employer may continue to use the on-track roadway maintenance machine or hi-rail vehicle with a non-complying condition until receiving the necessary part(s) for repair, subject to the requirements of § 214.503. However, if a non-complying condition is not repaired within 30 days following the report of the defect, the employer shall remove the on-track roadway maintenance machine or hi-rail vehicle from on-track service until it is brought into compliance with this subpart. (c) If the employer fails to order a part necessary to repair the reported non-complying condition, or if it fails to install an available part within the required seven calendar days, the on-track roadway maintenance machine or hi-rail vehicle shall be removed from on-track service until brought into compliance with this subpart. (d) Each employer shall maintain records pertaining to compliance with this section. Records may be kept on forms provided by the employer or by electronic means. The employer shall retain each record for at least one year, and the records shall be made available for inspection and copying during normal business hours by representatives of FRA and States participating under part 212 of this chapter. The records may be kept on the on-track roadway maintenance machine or hi-rail vehicle or at a location designated by the employer." 49:49:4.1.1.1.9.4.5.2,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.503 Good-faith challenges; procedures for notification and resolution.,FRA,,,,"(a) An employee operating an on-track roadway maintenance machine or hi-rail vehicle shall inform the employer whenever the employee makes a good-faith determination that the machine or vehicle does not comply with FRA regulations or has a condition that inhibits its safe operation. (b) Any employee charged with operating an on-track roadway maintenance machine or hi-rail vehicle covered by this subpart may refuse to operate the machine or vehicle if the employee makes a good-faith determination that it does not comply with the requirements of this subpart or has a condition that inhibits its safe operation. The employer shall not require the employee to operate the machine or vehicle until the challenge resulting from the good-faith determination is resolved. (c) Each employer shall have in place and follow written procedures to assure prompt and equitable resolution of challenges resulting from good-faith determinations made in accordance with this section. The procedures shall include specific steps to be taken by the employer to investigate each good-faith challenge, as well as procedures to follow once the employer finds a challenged machine or vehicle does not comply with this subpart or is otherwise unsafe to operate. The procedures shall also include the title and location of the employer's designated official." 49:49:4.1.1.1.9.4.5.3,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.505 Required environmental control and protection systems for new on-track roadway maintenance machines with enclosed cabs.,FRA,,,"[68 FR 44407, July 28, 2003, as amended at 87 FR 15143, Mar. 17, 2022]","(a) With the exception of machines subject to paragraph (i) of this section, the following new on-track roadway maintenance machines shall be equipped with operative heating systems, operative air conditioning systems, and operative positive pressurized ventilation systems: (1) Ballast regulators; (2) Tampers; (3) Mechanical brooms; (4) Rotary scarifiers; (5) Undercutters; and (6) Functional equivalents of any of the machines identified in paragraphs (a)(1) through (a)(5) of this section. (b) New on-track roadway maintenance machines, and existing on-track roadway maintenance machines specifically designated by the employer, of the types identified in paragraphs (a)(1) through (a)(5) of this section, or functionally equivalent thereto, shall be capable of protecting employees in the cabs of the machines from exposure to air contaminants, in accordance with 29 CFR 1910.1000. (c) An employer shall maintain a list of new and designated existing on-track roadway maintenance machines of the types identified in paragraphs (a)(1) through (a)(5) of this section, or functionally equivalent thereto. The list shall be kept current and made available to the Federal Railroad Administration and other Federal and State agencies upon request. (d) An existing roadway maintenance machine of the type identified in paragraphs (a)(1) through (a)(5) of this section, or functionally equivalent thereto, becomes “designated” when the employer adds the machine to the list required in paragraph (c) of this section. The designation is irrevocable, and the designated existing roadway maintenance machine remains subject to paragraph (b) of this section until it is retired or sold. (e) If the ventilation system on a new on-track roadway maintenance machine or a designated existing on-track roadway maintenance machine of the type identified in paragraphs (a)(1) through (a)(5) of this section, or functionally equivalent thereto, becomes incapable of protecting an employee in the cab of the machine from exposure to air contaminants in accordance with 29 CFR 1910.1000, personal respiratory protective equipment shall be provided for each such employee until the machine is repaired in accordance with § 214.531. (f) Personal respiratory protective equipment provided under paragraph (e) of this section shall comply with 29 CFR 1910.134. (g) New on-track roadway maintenance machines with enclosed cabs, other than the types identified in paragraphs (a)(1) through (a)(5) of this section or functionally equivalent thereto, shall be equipped with operative heating and ventilation systems. (h) When new on-track roadway maintenance machines require operation from non-enclosed stations outside of the main cab, the non-enclosed stations shall be equipped, where feasible from an engineering standpoint, with a permanent or temporary roof, canopy, or umbrella designed to provide cover from normal rainfall and midday sun. (i) Paragraph (a) of this section is not applicable to machines that are incapable of performing work functions other than by remote operation and are equipped with no operating controls ( i.e., remotely operated roadway maintenance machines) if the following conditions are met. (1) If a remotely operated roadway maintenance machine is operated from the cab of a separate machine, that separate machine must comply with paragraph (a) of this section. (2) If a remotely operated roadway maintenance machine is operated outside of the main cab of the separate machine in a manner that will expose the operator to air contaminants, as outlined in 29 CFR 1910.1000, the employee shall be protected in compliance with 29 CFR 1910.134. (3) No person is permitted on the remotely operated roadway maintenance machine while the equipment is operating. (4) Each remotely operated roadway maintenance machine must be clearly identified by stenciling, marking, or other written notice in a conspicuous location on the machine indicating the potential hazards of the machine being operated from a distance or that the machine may move automatically." 49:49:4.1.1.1.9.4.5.4,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.507 Required safety equipment for new on-track roadway maintenance machines.,FRA,,,"[68 FR 44407, July 28, 2003, as amended at 69 FR 8839, Feb. 26, 2004]","(a) Each new on-track roadway maintenance machine shall be equipped with: (1) A seat for each operator, except as provided in paragraph (b) of this section; (2) A safe and secure position with handholds, handrails, or a secure seat for each roadway worker transported on the machine. Each position shall be protected from moving parts of the machine; (3) A positive method of securement for turntables, on machines equipped with a turntable, through engagement of pins and hooks that block the descent of turntable devices below the rail head when not in use; (4) A windshield with safety glass, or other material with similar properties, if the machine is designed with a windshield. Each new on-track roadway maintenance machine designed with a windshield shall also have power windshield wipers or suitable alternatives that provide the machine operator an equivalent level of vision if windshield wipers are incompatible with the windshield material; (5) A machine braking system capable of effectively controlling the movement of the machine under normal operating conditions; (6) A first-aid kit that is readily accessible and complies with 29 CFR 1926.50(d)(2); and (7) An operative and properly charged fire extinguisher of 5 BC rating or higher which is securely mounted and readily accessible to the operator from the operator's work station. (b) Each new on-track roadway maintenance machine designed to be operated and transported by the operator in a standing position shall be equipped with handholds and handrails to provide the operator with a safe and secure position. (c) Each new on-track roadway maintenance machine that weighs more than 32,500 pounds light weight and is operated in excess of 20 mph shall be equipped with a speed indicator that is accurate within ±5 mph of the actual speed at speeds of 10 mph and above. (d) Each new on-track roadway maintenance machine shall have its as-built light weight displayed in a conspicuous location on the machine." 49:49:4.1.1.1.9.4.5.5,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.509 Required visual illumination and reflective devices for new on-track roadway maintenance machines.,FRA,,,,"Each new on-track roadway maintenance machine shall be equipped with the following visual illumination and reflective devices: (a) An illumination device, such as a headlight, capable of illuminating obstructions on the track ahead in the direction of travel for a distance of 300 feet under normal weather and atmospheric conditions; (b) Work lights, if the machine is operated during the period between one-half hour after sunset and one-half hour before sunrise or in dark areas such as tunnels, unless equivalent lighting is otherwise provided; (c) An operative 360-degree intermittent warning light or beacon mounted on the roof of the machine. New roadway maintenance machines that are not equipped with fixed roofs and have a light weight less than 17,500 pounds are exempt from this requirement; (d) A brake light activated by the application of the machine braking system, and designed to be visible for a distance of 300 feet under normal weather and atmospheric conditions; and (e) Rearward viewing devices, such as rearview mirrors." 49:49:4.1.1.1.9.4.5.6,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.511 Required audible warning devices for new on-track roadway maintenance machines.,FRA,,,,"Each new on-track roadway maintenance machine shall be equipped with: (a) A horn or other audible warning device that produces a sound loud enough to be heard by roadway workers and other machine operators within the immediate work area. The triggering mechanism for the device shall be clearly identifiable and within easy reach of the machine operator; and (b) An automatic change-of-direction alarm which provides an audible signal that is at least three seconds long and is distinguishable from the surrounding noise. Change of direction alarms may be interrupted by the machine operator when operating the machine in the work mode if the function of the machine would result in a constant, or almost constant, sounding of the device. In any action brought by FRA to enforce the change-of-direction alarm requirement, the employer shall have the burden of proving that use of the change-of-direction alarm in a particular work function would cause a constant, or almost constant, sounding of the device." 49:49:4.1.1.1.9.4.5.7,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.513 Retrofitting of existing on-track roadway maintenance machines; general.,FRA,,,"[68 FR 44407, July 28, 2003, as amended at 69 FR 8839, Feb. 26, 2004]","(a) Each existing on-track roadway maintenance machine shall have a safe and secure position with handholds, handrails, or a secure seat or bench position for each roadway worker transported on the machine. Each position shall be protected from moving parts of the machine. (b) By March 28, 2005, each existing on-track roadway maintenance machine shall be equipped with a permanent or portable horn or other audible warning device that produces a sound loud enough to be heard by roadway workers and other machine operators within the immediate work area. The triggering mechanism for the device shall be clearly identifiable and within easy reach of the machine operator. (c) By March 28, 2005, each existing on-track roadway maintenance machine shall be equipped with a permanent illumination device or a portable light that is securely placed and not hand-held. The illumination device or portable light shall be capable of illuminating obstructions on the track ahead for a distance of 300 feet under normal weather and atmospheric conditions when the machine is operated during the period between one-half hour after sunset and one-half hour before sunrise or in dark areas such as tunnels." 49:49:4.1.1.1.9.4.5.8,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,§ 214.515 Overhead covers for existing on-track roadway maintenance machines.,FRA,,,,"(a) For those existing on-track roadway maintenance machines either currently or previously equipped with overhead covers for the operator's position, defective covers shall be repaired, and missing covers shall be reinstalled, by March 28, 2005 and thereafter maintained in accordance with the provisions of § 214.531. (b) For those existing on-track roadway maintenance machines that are not already equipped with overhead covers for the operator's position, the employer shall evaluate the feasibility of providing an overhead cover on such a machine if requested in writing by the operator assigned to operate the machine or by the operator's designated representative. The employer shall provide the operator a written response to each request within 60 days. When the employer finds the addition of an overhead cover is not feasible, the response shall include an explanation of the reasoning used by the employer to reach that conclusion. (c) For purposes of this section, overhead covers shall provide the operator's position with cover from normal rainfall and midday sun." 49:49:4.1.1.1.9.4.5.9,49,Transportation,II,,214,PART 214—RAILROAD WORKPLACE SAFETY,D,Subpart D—On-Track Roadway Maintenance Machines and Hi-Rail Vehicles,,"§ 214.517 Retrofitting of existing on-track roadway maintenance machines manufactured on or after January 1, 1991.",FRA,,,"[68 FR 44407, July 28, 2003, as amended at 69 FR 8839, Feb. 26, 2004]","In addition to meeting the requirements of § 214.513, after March 28, 2005 each existing on-track roadway maintenance machine manufactured on or after January 1, 1991, shall have the following: (a) A change-of-direction alarm or rearview mirror or other rearward viewing device, if either device is feasible, given the machine's design, and if either device adds operational safety value, given the machine's function. In any action brought by FRA to enforce this requirement, the employer shall have the burden of proving that neither device is feasible or adds operational safety value, or both, given the machine's design or work function. (b) An operative heater, when the machine is operated at an ambient temperature less than 50 degrees Fahrenheit and is equipped with, or has been equipped with, a heater installed by the manufacturer or the railroad. (c) The light weight of the machine stenciled or otherwise clearly displayed on the machine, if the light weight is known. (d) Reflective material, or a reflective device, or operable brake lights. (e) Safety glass when its glass is normally replaced, except that replacement glass that is specifically intended for on-track roadway maintenance machines and is in the employer's inventory as of September 26, 2003 may be utilized until exhausted. (f) A turntable restraint device, on machines equipped with a turntable, to prevent undesired lowering, or a warning light indicating that the turntable is not in the normal travel position."